raserror.h

希望我上传的这些东西可以对搞编程的程序员有点小小的帮助！谢谢！

/* Copyright (c) 1992-1999, Microsoft Corporation, all rights reserved
**
** raserror.h
** Remote Access external API
** RAS specific error codes
*/

#ifndef _RASERROR_H_
#pragma option push -b -a8 -pc -A- /*P_O_Push*/
#define _RASERROR_H_

#if _MSC_VER > 1000
#pragma once
#endif

#define RASBASE 600
#define SUCCESS 0


#define PENDING                              (RASBASE+0)
/*
 * An operation is pending.%0
 */

#define ERROR_INVALID_PORT_HANDLE            (RASBASE+1)
/*
 * An invalid port handle was detected.%0
 */

#define ERROR_PORT_ALREADY_OPEN              (RASBASE+2)
/*
 * The specified port is already open.%0
 */

#define ERROR_BUFFER_TOO_SMALL               (RASBASE+3)
/*
 * The caller's buffer is too small.%0
 */

#define ERROR_WRONG_INFO_SPECIFIED           (RASBASE+4)
/*
 * Incorrect information was specified.%0
 */

#define ERROR_CANNOT_SET_PORT_INFO           (RASBASE+5)
/*
 * The port information cannot be set.%0
 */

#define ERROR_PORT_NOT_CONNECTED             (RASBASE+6)
/*
 * The specified port is not connected.%0
 */

#define ERROR_EVENT_INVALID                  (RASBASE+7)
/*
 * An invalid event was detected.%0
 */

#define ERROR_DEVICE_DOES_NOT_EXIST          (RASBASE+8)
/*
 * A device was specified that does not exist.%0
 */

#define ERROR_DEVICETYPE_DOES_NOT_EXIST      (RASBASE+9)
/*
 * A device type was specified that does not exist.%0
 */

#define ERROR_BUFFER_INVALID                 (RASBASE+10)
/*
 * An invalid buffer was specified.%0
 */

#define ERROR_ROUTE_NOT_AVAILABLE            (RASBASE+11)
/*
 * A route was specified that is not available.%0
 */

#define ERROR_ROUTE_NOT_ALLOCATED            (RASBASE+12)
/*
 * A route was specified that is not allocated.%0
 */

#define ERROR_INVALID_COMPRESSION_SPECIFIED  (RASBASE+13)
/*
 * An invalid compression was specified.%0
 */

#define ERROR_OUT_OF_BUFFERS                 (RASBASE+14)
/*
 * There were insufficient buffers available.%0
 */

#define ERROR_PORT_NOT_FOUND                 (RASBASE+15)
/*
 * The specified port was not found.%0
 */ 

#define ERROR_ASYNC_REQUEST_PENDING          (RASBASE+16)
/*
 * An asynchronous request is pending.%0
 */

#define ERROR_ALREADY_DISCONNECTING          (RASBASE+17)
/*
 * The modem (or other connecting device) is already disconnecting.%0
 */

#define ERROR_PORT_NOT_OPEN                  (RASBASE+18)
/*
 * The specified port is not open.%0
 */ 

#define ERROR_PORT_DISCONNECTED              (RASBASE+19)
/*
 * The specified port is not connected.%0
 */

#define ERROR_NO_ENDPOINTS                   (RASBASE+20)
/*
 * No endpoints could be determined.%0
 */

#define ERROR_CANNOT_OPEN_PHONEBOOK          (RASBASE+21)
/*
 * The system could not open the phone book file.%0
 */ 

#define ERROR_CANNOT_LOAD_PHONEBOOK          (RASBASE+22)
/*
 * The system could not load the phone book file.%0
 */

#define ERROR_CANNOT_FIND_PHONEBOOK_ENTRY    (RASBASE+23)
/*
 * The system could not find the phone book entry for this connection.%0
 */

#define ERROR_CANNOT_WRITE_PHONEBOOK         (RASBASE+24)
/*
 * The system could not update the phone book file.%0
 */

#define ERROR_CORRUPT_PHONEBOOK              (RASBASE+25)
/*
 * The system found invalid information in the phone book file.%0
 */

#define ERROR_CANNOT_LOAD_STRING             (RASBASE+26)
/*
 * A string could not be loaded.%0
 */

#define ERROR_KEY_NOT_FOUND                  (RASBASE+27)
/*
 * A key could not be found.%0
 */

#define ERROR_DISCONNECTION                  (RASBASE+28)
/*
 * The connection was closed.%0
 */ 

#define ERROR_REMOTE_DISCONNECTION           (RASBASE+29)
/*
 * The connection was closed by the remote computer.%0
 */

#define ERROR_HARDWARE_FAILURE               (RASBASE+30)
/*
 * The modem (or other connecting device) was disconnected due to hardware failure.%0
 */

#define ERROR_USER_DISCONNECTION             (RASBASE+31)
/*
 * The user disconnected the modem (or other connecting device).%0
 */

#define ERROR_INVALID_SIZE                   (RASBASE+32)
/*
 * An incorrect structure size was detected.%0
 */

#define ERROR_PORT_NOT_AVAILABLE             (RASBASE+33)
/*
 * The modem (or other connecting device) is already in use or is not configured properly.%0 
 */

#define ERROR_CANNOT_PROJECT_CLIENT          (RASBASE+34)
/*
 * Your computer could not be registered on the remote network.%0
 */ 

#define ERROR_UNKNOWN                        (RASBASE+35)
/*
 * There was an unknown error.%0
 */

#define ERROR_WRONG_DEVICE_ATTACHED          (RASBASE+36)
/*
 * The device attached to the port is not the one expected.%0
 */

#define ERROR_BAD_STRING                     (RASBASE+37)
/*
 * A string was detected that could not be converted.%0
 */

#define ERROR_REQUEST_TIMEOUT                (RASBASE+38)
/*
 * The request has timed out.%0
 */

#define ERROR_CANNOT_GET_LANA                (RASBASE+39)
/*
 * No asynchronous net is available.%0
 */

#define ERROR_NETBIOS_ERROR                  (RASBASE+40)
/*
 * An error has occurred involving NetBIOS.%0
 */

#define ERROR_SERVER_OUT_OF_RESOURCES        (RASBASE+41)
/*
 * The server cannot allocate NetBIOS resources needed to support the client.%0
 */

#define ERROR_NAME_EXISTS_ON_NET             (RASBASE+42)
/*
 * One of your computer's NetBIOS names is already registered on the remote network.%0
 */

#define ERROR_SERVER_GENERAL_NET_FAILURE     (RASBASE+43)
/*
 * A network adapter at the server failed.%0
 */

#define WARNING_MSG_ALIAS_NOT_ADDED          (RASBASE+44)
/*
 * You will not receive network message popups.%0
 */

#define ERROR_AUTH_INTERNAL                  (RASBASE+45)
/*
 * There was an internal authentication error.%0
 */

#define ERROR_RESTRICTED_LOGON_HOURS         (RASBASE+46)
/*
 * The account is not permitted to log on at this time of day.%0
 */

#define ERROR_ACCT_DISABLED                  (RASBASE+47)
/*
 * The account is disabled.%0
 */

#define ERROR_PASSWD_EXPIRED                 (RASBASE+48)
/*
 * The password for this account has expired.%0
 */

#define ERROR_NO_DIALIN_PERMISSION           (RASBASE+49)
/*
 * The account does not have permission to dial in.%0
 */

#define ERROR_SERVER_NOT_RESPONDING          (RASBASE+50)
/*
 * The remote access server is not responding.%0
 */

#define ERROR_FROM_DEVICE                    (RASBASE+51)
/*
 * The modem (or other connecting device) has reported an error.%0
 */

#define ERROR_UNRECOGNIZED_RESPONSE          (RASBASE+52)
/*
 * There was an unrecognized response from the modem (or other connecting device).%0
 */

#define ERROR_MACRO_NOT_FOUND                (RASBASE+53)
/*
 * A macro required by the modem (or other connecting device) was not found in the device.INF file.%0
 */

#define ERROR_MACRO_NOT_DEFINED              (RASBASE+54)
/*
 * A command or response in the device.INF file section refers to an undefined macro.%0
 */

#define ERROR_MESSAGE_MACRO_NOT_FOUND        (RASBASE+55)
/*
 * The <message> macro was not found in the device.INF file section.%0
 */

#define ERROR_DEFAULTOFF_MACRO_NOT_FOUND     (RASBASE+56)
/*
 * The <defaultoff> macro in the device.INF file section contains an undefined macro.%0
 */

#define ERROR_FILE_COULD_NOT_BE_OPENED       (RASBASE+57)
/*
 * The device.INF file could not be opened.%0
 */

#define ERROR_DEVICENAME_TOO_LONG            (RASBASE+58)
/*
 * The device name in the device.INF or media.INI file is too long.%0
 */

#define ERROR_DEVICENAME_NOT_FOUND           (RASBASE+59)
/*
 * The media.INI file refers to an unknown device name.%0
 */

#define ERROR_NO_RESPONSES                   (RASBASE+60)
/*
 * The device.INF file contains no responses for the command.%0
 */

#define ERROR_NO_COMMAND_FOUND               (RASBASE+61)
/*
 * The device.INF file is missing a command.%0
 */

#define ERROR_WRONG_KEY_SPECIFIED            (RASBASE+62)
/*
 * There was an attempt to set a macro not listed in device.INF file section.%0
 */

#define ERROR_UNKNOWN_DEVICE_TYPE            (RASBASE+63)
/*
 * The media.INI file refers to an unknown device type.%0
 */

#define ERROR_ALLOCATING_MEMORY              (RASBASE+64)
/*
 * The system has run out of memory.%0
 */

#define ERROR_PORT_NOT_CONFIGURED            (RASBASE+65)
/*
 * The modem (or other connecting device) is not properly configured.%0
 */

#define ERROR_DEVICE_NOT_READY               (RASBASE+66)
/*
 * The modem (or other connecting device) is not functioning.%0
 */

#define ERROR_READING_INI_FILE               (RASBASE+67)
/*
 * The system was unable to read the media.INI file.%0
 */

#define ERROR_NO_CONNECTION                  (RASBASE+68)
/*
 * The connection was terminated.%0
 */

#define ERROR_BAD_USAGE_IN_INI_FILE          (RASBASE+69)
/*
 * The usage parameter in the media.INI file is invalid.%0
 */

#define ERROR_READING_SECTIONNAME            (RASBASE+70)
/*
 * The system was unable to read the section name from the media.INI file.%0
 */

#define ERROR_READING_DEVICETYPE             (RASBASE+71)
/*
 * The system was unable to read the device type from the media.INI file.%0
 */

#define ERROR_READING_DEVICENAME             (RASBASE+72)
/*
 * The system was unable to read the device name from the media.INI file.%0
 */

#define ERROR_READING_USAGE                  (RASBASE+73)
/*
 * The system was unable to read the usage from the media.INI file.%0
 */

#define ERROR_READING_MAXCONNECTBPS          (RASBASE+74)
/*
 * The system was unable to read the maximum connection BPS rate from the media.INI file.%0
 */

#define ERROR_READING_MAXCARRIERBPS          (RASBASE+75)
/*
 * The system was unable to read the maximum carrier connection speed from the media.INI file.%0
 */

#define ERROR_LINE_BUSY                      (RASBASE+76)
/*
 * The phone line is busy.%0
 */

#define ERROR_VOICE_ANSWER                   (RASBASE+77)
/*
 * A person answered instead of a modem (or other connecting device).%0
 */

#define ERROR_NO_ANSWER                      (RASBASE+78)
/*
 * There was no answer.%0
 */

#define ERROR_NO_CARRIER                     (RASBASE+79)
/*
 * The system could not detect the carrier.%0
 */

#define ERROR_NO_DIALTONE                    (RASBASE+80)
/*
 * There was no dial tone.%0
 */

#define ERROR_IN_COMMAND                     (RASBASE+81)
/*
 * The modem (or other connecting device) reported a general error.%0
 */

#define ERROR_WRITING_SECTIONNAME            (RASBASE+82)
/*
 * There was an error in writing the section name.%0
 */

#define ERROR_WRITING_DEVICETYPE             (RASBASE+83)
/*
 * There was an error in writing the device type.%0
 */

#define ERROR_WRITING_DEVICENAME             (RASBASE+84)
/*
 * There was an error in writing the device name.%0
 */

#define ERROR_WRITING_MAXCONNECTBPS          (RASBASE+85)
/*
 * There was an error in writing the maximum connection speed.
 */

#define ERROR_WRITING_MAXCARRIERBPS          (RASBASE+86)
/*
 * There was an error in writing the maximum carrier speed.%0
 */

#define ERROR_WRITING_USAGE                  (RASBASE+87)
/*
 * There was an error in writing the usage.%0
 */

#define ERROR_WRITING_DEFAULTOFF             (RASBASE+88)
/*
 *  There was an error in writing the default-off.%0
 */

#define ERROR_READING_DEFAULTOFF             (RASBASE+89)
/*
 *  There was an error in reading the default-off.%0
 */

#define ERROR_EMPTY_INI_FILE                 (RASBASE+90)
/*
 * ERROR_EMPTY_INI_FILE%0
 */

#define ERROR_AUTHENTICATION_FAILURE         (RASBASE+91)
/*
 * Access was denied because the username and/or password was invalid on the domain.%0
 */

#define ERROR_PORT_OR_DEVICE                 (RASBASE+92)
/*
 * There was a hardware failure in the modem (or other connecting device).%0
 */

#define ERROR_NOT_BINARY_MACRO               (RASBASE+93)
/*
 * ERROR_NOT_BINARY_MACRO%0
 */

#define ERROR_DCB_NOT_FOUND                  (RASBASE+94)
/*
 * ERROR_DCB_NOT_FOUND%0
 */

#define ERROR_STATE_MACHINES_NOT_STARTED     (RASBASE+95)
/*
 * The state machines are not started.%0
 */

#define ERROR_STATE_MACHINES_ALREADY_STARTED (RASBASE+96)
/*
 * The state machines are already started.%0
 */

#define ERROR_PARTIAL_RESPONSE_LOOPING       (RASBASE+97)
/*
 * The response looping did not complete.%0
 */

#define ERROR_UNKNOWN_RESPONSE_KEY           (RASBASE+98)
/*
 * A response keyname in the device.INF file is not in the expected format.%0
 */

#define ERROR_RECV_BUF_FULL                  (RASBASE+99)
/*
 * The modem (or other connecting device) response caused a buffer overflow.%0
 */