oledberr.h

希望我上传的这些东西可以对搞编程的程序员有点小小的帮助！谢谢！

#ifndef _MSADERR_H_
#pragma option push -b -a8 -pc -A- /*P_O_Push*/
#define _MSADERR_H_
#ifndef FACILITY_WINDOWS
//+---------------------------------------------------------------------------
//
//  Microsoft OLE DB
//  Copyright (C) Microsoft Corporation, 1994 - 1998.
//
//----------------------------------------------------------------------------


//
//  Values are 32 bit values layed out as follows:
//
//   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
//   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
//  +---+-+-+-----------------------+-------------------------------+
//  |Sev|C|R|     Facility          |               Code            |
//  +---+-+-+-----------------------+-------------------------------+
//
//  where
//
//      Sev - is the severity code
//
//          00 - Success
//          01 - Informational
//          10 - Warning
//          11 - Error
//
//      C - is the Customer code flag
//
//      R - is a reserved bit
//
//      Facility - is the facility code
//
//      Code - is the facility's status code
//
//
// Define the facility codes
//
#define FACILITY_WINDOWS                 0x8
#define FACILITY_ITF                     0x4


//
// Define the severity codes
//
#define STATUS_SEVERITY_SUCCESS          0x0
#define STATUS_SEVERITY_COERROR          0x2


//
// MessageId: DB_E_BOGUS
//
// MessageText:
//
//  Dummy error - need this error so that mc puts the above defines
//  inside the FACILITY_WINDOWS guard, instead of leaving it empty
//
#define DB_E_BOGUS                       ((HRESULT)0x80040EFFL)

#endif // FACILITY_WINDOWS

//
// Codes 0x0e00-0x0eff are reserved for the OLE DB group of
// interfaces.
//
// Free codes are:
//
//		Error:
//						
//
//		Success:
//			0x0eea
//			
//


//
// OLEDBVER
//	OLE DB version number (0x0250); this can be overridden with an older
// version number if necessary
//

// If OLEDBVER is not defined, assume version 2.5
#ifndef OLEDBVER
#define OLEDBVER 0x0250
#endif

//
// MessageId: DB_E_BADACCESSORHANDLE
//
// MessageText:
//
//  Accessor is invalid.
//
#define DB_E_BADACCESSORHANDLE           ((HRESULT)0x80040E00L)

//
// MessageId: DB_E_ROWLIMITEXCEEDED
//
// MessageText:
//
//  Row could not be inserted into the rowset without exceeding provider's maximum number of active rows.
//
#define DB_E_ROWLIMITEXCEEDED            ((HRESULT)0x80040E01L)

//
// MessageId: DB_E_READONLYACCESSOR
//
// MessageText:
//
//  Accessor is read-only. Operation failed.
//
#define DB_E_READONLYACCESSOR            ((HRESULT)0x80040E02L)

//
// MessageId: DB_E_SCHEMAVIOLATION
//
// MessageText:
//
//  Values violate the database schema.
//
#define DB_E_SCHEMAVIOLATION             ((HRESULT)0x80040E03L)

//
// MessageId: DB_E_BADROWHANDLE
//
// MessageText:
//
//  Row handle is invalid.
//
#define DB_E_BADROWHANDLE                ((HRESULT)0x80040E04L)

//
// MessageId: DB_E_OBJECTOPEN
//
// MessageText:
//
//  Object was open.
//
#define DB_E_OBJECTOPEN                  ((HRESULT)0x80040E05L)

//@@@+ V1.5
#if( OLEDBVER >= 0x0150 )
//
// MessageId: DB_E_BADCHAPTER
//
// MessageText:
//
//  Chapter is invalid.
//
#define DB_E_BADCHAPTER                  ((HRESULT)0x80040E06L)

#endif // OLEDBVER >= 0x0150
//@@@- V1.5

//
// MessageId: DB_E_CANTCONVERTVALUE
//
// MessageText:
//
//  Data or literal value could not be converted to the type of the column in the data source, 
//  and the provider was unable to determine which columns could not be converted.  Data 
//  overflow or sign mismatch was not the cause.
//
#define DB_E_CANTCONVERTVALUE            ((HRESULT)0x80040E07L)

//
// MessageId: DB_E_BADBINDINFO
//
// MessageText:
//
//  Binding information is invalid.
//
#define DB_E_BADBINDINFO                 ((HRESULT)0x80040E08L)

//
// MessageId: DB_SEC_E_PERMISSIONDENIED
//
// MessageText:
//
//  Permission denied.
//
#define DB_SEC_E_PERMISSIONDENIED        ((HRESULT)0x80040E09L)

//
// MessageId: DB_E_NOTAREFERENCECOLUMN
//
// MessageText:
//
//  Column does not contain bookmarks or chapters.
//
#define DB_E_NOTAREFERENCECOLUMN         ((HRESULT)0x80040E0AL)

//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_E_LIMITREJECTED
//
// MessageText:
//
//  Cost limits were rejected.
//
#define DB_E_LIMITREJECTED               ((HRESULT)0x80040E0BL)

#endif // OLEDBVER >= 0x0250
//@@@- V2.5

//
// MessageId: DB_E_NOCOMMAND
//
// MessageText:
//
//  Command text was not set for the command object.
//
#define DB_E_NOCOMMAND                   ((HRESULT)0x80040E0CL)

//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_E_COSTLIMIT
//
// MessageText:
//
//  Query plan within the cost limit cannot be found.
//
#define DB_E_COSTLIMIT                   ((HRESULT)0x80040E0DL)

#endif // OLEDBVER >= 0x0250
//@@@- V2.5

//
// MessageId: DB_E_BADBOOKMARK
//
// MessageText:
//
//  Bookmark is invalid.
//
#define DB_E_BADBOOKMARK                 ((HRESULT)0x80040E0EL)

//
// MessageId: DB_E_BADLOCKMODE
//
// MessageText:
//
//  Lock mode is invalid.
//
#define DB_E_BADLOCKMODE                 ((HRESULT)0x80040E0FL)

//
// MessageId: DB_E_PARAMNOTOPTIONAL
//
// MessageText:
//
//  No value given for one or more required parameters.
//
#define DB_E_PARAMNOTOPTIONAL            ((HRESULT)0x80040E10L)

//
// MessageId: DB_E_BADCOLUMNID
//
// MessageText:
//
//  Column ID is invalid.
//
#define DB_E_BADCOLUMNID                 ((HRESULT)0x80040E11L)

//
// MessageId: DB_E_BADRATIO
//
// MessageText:
//
//  Numerator was greater than denominator. Values must express ratio between zero and 1.
//
#define DB_E_BADRATIO                    ((HRESULT)0x80040E12L)

//@@@+ V2.0
#if( OLEDBVER >= 0x0200 )
//
// MessageId: DB_E_BADVALUES
//
// MessageText:
//
//  Value is invalid.
//
#define DB_E_BADVALUES                   ((HRESULT)0x80040E13L)

#endif // OLEDBVER >= 0x0200
//@@@- V2.0

//
// MessageId: DB_E_ERRORSINCOMMAND
//
// MessageText:
//
//  One or more errors occurred during processing of command.
//
#define DB_E_ERRORSINCOMMAND             ((HRESULT)0x80040E14L)

//
// MessageId: DB_E_CANTCANCEL
//
// MessageText:
//
//  Command cannot be canceled.
//
#define DB_E_CANTCANCEL                  ((HRESULT)0x80040E15L)

//
// MessageId: DB_E_DIALECTNOTSUPPORTED
//
// MessageText:
//
//  Command dialect is not supported by this provider.
//
#define DB_E_DIALECTNOTSUPPORTED         ((HRESULT)0x80040E16L)

//
// MessageId: DB_E_DUPLICATEDATASOURCE
//
// MessageText:
//
//  Data source object could not be created because the named data source already exists.
//
#define DB_E_DUPLICATEDATASOURCE         ((HRESULT)0x80040E17L)

//
// MessageId: DB_E_CANNOTRESTART
//
// MessageText:
//
//  Rowset position cannot be restarted.
//
#define DB_E_CANNOTRESTART               ((HRESULT)0x80040E18L)

//
// MessageId: DB_E_NOTFOUND
//
// MessageText:
//
//  Object or data matching the name, range, or selection criteria
//  was not found within the scope of this operation.
//
#define DB_E_NOTFOUND                    ((HRESULT)0x80040E19L)

//
// MessageId: DB_E_NEWLYINSERTED
//
// MessageText:
//
//  Identity cannot be determined for newly inserted rows.
//
#define DB_E_NEWLYINSERTED               ((HRESULT)0x80040E1BL)

//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_E_CANNOTFREE
//
// MessageText:
//
//  Provider has ownership of this tree.
//
#define DB_E_CANNOTFREE                  ((HRESULT)0x80040E1AL)

//
// MessageId: DB_E_GOALREJECTED
//
// MessageText:
//
//  Goal was rejected because no nonzero weights were specified for any goals supported. Current goal was not changed.
//
#define DB_E_GOALREJECTED                ((HRESULT)0x80040E1CL)

#endif // OLEDBVER >= 0x0250
//@@@- V2.5

//
// MessageId: DB_E_UNSUPPORTEDCONVERSION
//
// MessageText:
//
//  Requested conversion is not supported.
//
#define DB_E_UNSUPPORTEDCONVERSION       ((HRESULT)0x80040E1DL)

//
// MessageId: DB_E_BADSTARTPOSITION
//
// MessageText:
//
//  No rows were returned because the offset value moves the position before the beginning or after the end of the rowset.
//
#define DB_E_BADSTARTPOSITION            ((HRESULT)0x80040E1EL)

//@@@+ V2.0
#if( OLEDBVER >= 0x0200 )
//
// MessageId: DB_E_NOQUERY
//
// MessageText:
//
//  Information was requested for a query and the query was not set.
//
#define DB_E_NOQUERY                     ((HRESULT)0x80040E1FL)

#endif // OLEDBVER >= 0x0200
//@@@- V2.0

//
// MessageId: DB_E_NOTREENTRANT
//
// MessageText:
//
//  Consumer's event handler called a non-reentrant method in the provider.
//
#define DB_E_NOTREENTRANT                ((HRESULT)0x80040E20L)

//
// MessageId: DB_E_ERRORSOCCURRED
//
// MessageText:
//
//  Multiple-step operation generated errors. Check each status value. No work was done.
//
#define DB_E_ERRORSOCCURRED              ((HRESULT)0x80040E21L)

//
// MessageId: DB_E_NOAGGREGATION
//
// MessageText:
//
//  Non-NULL controlling IUnknown was specified, and either the requested interface was not 
//  IUnknown, or the provider does not support COM aggregation.
//
#define DB_E_NOAGGREGATION               ((HRESULT)0x80040E22L)

//
// MessageId: DB_E_DELETEDROW
//
// MessageText:
//
//  Row handle referred to a deleted row or a row marked for deletion.
//
#define DB_E_DELETEDROW                  ((HRESULT)0x80040E23L)

//
// MessageId: DB_E_CANTFETCHBACKWARDS
//
// MessageText:
//
//  Rowset does not support fetching backward.
//
#define DB_E_CANTFETCHBACKWARDS          ((HRESULT)0x80040E24L)

//
// MessageId: DB_E_ROWSNOTRELEASED
//
// MessageText:
//
//  Row handles must all be released before new ones can be obtained.
//
#define DB_E_ROWSNOTRELEASED             ((HRESULT)0x80040E25L)

//
// MessageId: DB_E_BADSTORAGEFLAG
//
// MessageText:
//
//  One or more storage flags are not supported.
//
#define DB_E_BADSTORAGEFLAG              ((HRESULT)0x80040E26L)

//@@@+ V1.5
#if( OLEDBVER >= 0x0150 )
//
// MessageId: DB_E_BADCOMPAREOP
//
// MessageText:
//
//  Comparison operator is invalid.
//
#define DB_E_BADCOMPAREOP                ((HRESULT)0x80040E27L)

#endif // OLEDBVER >= 0x0150
//@@@- V1.5

//
// MessageId: DB_E_BADSTATUSVALUE
//
// MessageText:
//
//  Status flag was neither DBCOLUMNSTATUS_OK nor
//  DBCOLUMNSTATUS_ISNULL.
//
#define DB_E_BADSTATUSVALUE              ((HRESULT)0x80040E28L)

//
// MessageId: DB_E_CANTSCROLLBACKWARDS
//
// MessageText:
//
//  Rowset does not support scrolling backward.
//
#define DB_E_CANTSCROLLBACKWARDS         ((HRESULT)0x80040E29L)

//@@@+ V2.5
#if( OLEDBVER >= 0x0250 )
//
// MessageId: DB_E_BADREGIONHANDLE
//
// MessageText:
//
//  Region handle is invalid.
//
#define DB_E_BADREGIONHANDLE             ((HRESULT)0x80040E2AL)

//
// MessageId: DB_E_NONCONTIGUOUSRANGE
//
// MessageText:
//
//  Set of rows is not contiguous to, or does not overlap, the rows in the watch region.
//
#define DB_E_NONCONTIGUOUSRANGE          ((HRESULT)0x80040E2BL)

//
// MessageId: DB_E_INVALIDTRANSITION
//
// MessageText:
//
//  Transition from ALL* to MOVE* or EXTEND* was specified.
//
#define DB_E_INVALIDTRANSITION           ((HRESULT)0x80040E2CL)

//
// MessageId: DB_E_NOTASUBREGION
//
// MessageText:
//
//  Region is not a proper subregion of the region
//  identified by the watch region handle.
//
#define DB_E_NOTASUBREGION               ((HRESULT)0x80040E2DL)

#endif // OLEDBVER >= 0x0250
//@@@- V2.5

//
// MessageId: DB_E_MULTIPLESTATEMENTS
//
// MessageText:
//
//  Multiple-statement commands are not supported by this provider.
//
#define DB_E_MULTIPLESTATEMENTS          ((HRESULT)0x80040E2EL)

//
// MessageId: DB_E_INTEGRITYVIOLATION
//
// MessageText:
//
//  Value violated the integrity constraints for a column or
//  table.
//
#define DB_E_INTEGRITYVIOLATION          ((HRESULT)0x80040E2FL)

//
// MessageId: DB_E_BADTYPENAME
//
// MessageText:
//
//  Type name is invalid.