winerror.h

希望我上传的这些东西可以对搞编程的程序员有点小小的帮助！谢谢！

//  A serial I/O operation was completed by another write to the serial port.
//  (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
//
#define ERROR_MORE_WRITES                1120L

//
// MessageId: ERROR_COUNTER_TIMEOUT
//
// MessageText:
//
//  A serial I/O operation completed because the timeout period expired.
//  (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
//
#define ERROR_COUNTER_TIMEOUT            1121L

//
// MessageId: ERROR_FLOPPY_ID_MARK_NOT_FOUND
//
// MessageText:
//
//  No ID address mark was found on the floppy disk.
//
#define ERROR_FLOPPY_ID_MARK_NOT_FOUND   1122L

//
// MessageId: ERROR_FLOPPY_WRONG_CYLINDER
//
// MessageText:
//
//  Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
//
#define ERROR_FLOPPY_WRONG_CYLINDER      1123L

//
// MessageId: ERROR_FLOPPY_UNKNOWN_ERROR
//
// MessageText:
//
//  The floppy disk controller reported an error that is not recognized by the floppy disk driver.
//
#define ERROR_FLOPPY_UNKNOWN_ERROR       1124L

//
// MessageId: ERROR_FLOPPY_BAD_REGISTERS
//
// MessageText:
//
//  The floppy disk controller returned inconsistent results in its registers.
//
#define ERROR_FLOPPY_BAD_REGISTERS       1125L

//
// MessageId: ERROR_DISK_RECALIBRATE_FAILED
//
// MessageText:
//
//  While accessing the hard disk, a recalibrate operation failed, even after retries.
//
#define ERROR_DISK_RECALIBRATE_FAILED    1126L

//
// MessageId: ERROR_DISK_OPERATION_FAILED
//
// MessageText:
//
//  While accessing the hard disk, a disk operation failed even after retries.
//
#define ERROR_DISK_OPERATION_FAILED      1127L

//
// MessageId: ERROR_DISK_RESET_FAILED
//
// MessageText:
//
//  While accessing the hard disk, a disk controller reset was needed, but even that failed.
//
#define ERROR_DISK_RESET_FAILED          1128L

//
// MessageId: ERROR_EOM_OVERFLOW
//
// MessageText:
//
//  Physical end of tape encountered.
//
#define ERROR_EOM_OVERFLOW               1129L

//
// MessageId: ERROR_NOT_ENOUGH_SERVER_MEMORY
//
// MessageText:
//
//  Not enough server storage is available to process this command.
//
#define ERROR_NOT_ENOUGH_SERVER_MEMORY   1130L

//
// MessageId: ERROR_POSSIBLE_DEADLOCK
//
// MessageText:
//
//  A potential deadlock condition has been detected.
//
#define ERROR_POSSIBLE_DEADLOCK          1131L

//
// MessageId: ERROR_MAPPED_ALIGNMENT
//
// MessageText:
//
//  The base address or the file offset specified does not have the proper alignment.
//
#define ERROR_MAPPED_ALIGNMENT           1132L

//
// MessageId: ERROR_SET_POWER_STATE_VETOED
//
// MessageText:
//
//  An attempt to change the system power state was vetoed by another application or driver.
//
#define ERROR_SET_POWER_STATE_VETOED     1140L

//
// MessageId: ERROR_SET_POWER_STATE_FAILED
//
// MessageText:
//
//  The system BIOS failed an attempt to change the system power state.
//
#define ERROR_SET_POWER_STATE_FAILED     1141L

//
// MessageId: ERROR_TOO_MANY_LINKS
//
// MessageText:
//
//  An attempt was made to create more links on a file than the file system supports.
//
#define ERROR_TOO_MANY_LINKS             1142L

//
// MessageId: ERROR_OLD_WIN_VERSION
//
// MessageText:
//
//  The specified program requires a newer version of Windows.
//
#define ERROR_OLD_WIN_VERSION            1150L

//
// MessageId: ERROR_APP_WRONG_OS
//
// MessageText:
//
//  The specified program is not a Windows or MS-DOS program.
//
#define ERROR_APP_WRONG_OS               1151L

//
// MessageId: ERROR_SINGLE_INSTANCE_APP
//
// MessageText:
//
//  Cannot start more than one instance of the specified program.
//
#define ERROR_SINGLE_INSTANCE_APP        1152L

//
// MessageId: ERROR_RMODE_APP
//
// MessageText:
//
//  The specified program was written for an earlier version of Windows.
//
#define ERROR_RMODE_APP                  1153L

//
// MessageId: ERROR_INVALID_DLL
//
// MessageText:
//
//  One of the library files needed to run this application is damaged.
//
#define ERROR_INVALID_DLL                1154L

//
// MessageId: ERROR_NO_ASSOCIATION
//
// MessageText:
//
//  No application is associated with the specified file for this operation.
//
#define ERROR_NO_ASSOCIATION             1155L

//
// MessageId: ERROR_DDE_FAIL
//
// MessageText:
//
//  An error occurred in sending the command to the application.
//
#define ERROR_DDE_FAIL                   1156L

//
// MessageId: ERROR_DLL_NOT_FOUND
//
// MessageText:
//
//  One of the library files needed to run this application cannot be found.
//
#define ERROR_DLL_NOT_FOUND              1157L

//
// MessageId: ERROR_NO_MORE_USER_HANDLES
//
// MessageText:
//
//  The current process has used all of its system allowance of handles for Window Manager objects.
//
#define ERROR_NO_MORE_USER_HANDLES       1158L

//
// MessageId: ERROR_MESSAGE_SYNC_ONLY
//
// MessageText:
//
//  The message can be used only with synchronous operations.
//
#define ERROR_MESSAGE_SYNC_ONLY          1159L

//
// MessageId: ERROR_SOURCE_ELEMENT_EMPTY
//
// MessageText:
//
//  The indicated source element has no media.
//
#define ERROR_SOURCE_ELEMENT_EMPTY       1160L

//
// MessageId: ERROR_DESTINATION_ELEMENT_FULL
//
// MessageText:
//
//  The indicated destination element already contains media.
//
#define ERROR_DESTINATION_ELEMENT_FULL   1161L

//
// MessageId: ERROR_ILLEGAL_ELEMENT_ADDRESS
//
// MessageText:
//
//  The indicated element does not exist.
//
#define ERROR_ILLEGAL_ELEMENT_ADDRESS    1162L

//
// MessageId: ERROR_MAGAZINE_NOT_PRESENT
//
// MessageText:
//
//  The indicated element is part of a magazine that is not present.
//
#define ERROR_MAGAZINE_NOT_PRESENT       1163L

//
// MessageId: ERROR_DEVICE_REINITIALIZATION_NEEDED
//
// MessageText:
//
//  The indicated device requires reinitialization due to hardware errors.
//
#define ERROR_DEVICE_REINITIALIZATION_NEEDED 1164L    // dderror

//
// MessageId: ERROR_DEVICE_REQUIRES_CLEANING
//
// MessageText:
//
//  The device has indicated that cleaning is required before further operations are attempted.
//
#define ERROR_DEVICE_REQUIRES_CLEANING   1165L

//
// MessageId: ERROR_DEVICE_DOOR_OPEN
//
// MessageText:
//
//  The device has indicated that its door is open.
//
#define ERROR_DEVICE_DOOR_OPEN           1166L

//
// MessageId: ERROR_DEVICE_NOT_CONNECTED
//
// MessageText:
//
//  The device is not connected.
//
#define ERROR_DEVICE_NOT_CONNECTED       1167L

//
// MessageId: ERROR_NOT_FOUND
//
// MessageText:
//
//  Element not found.
//
#define ERROR_NOT_FOUND                  1168L

//
// MessageId: ERROR_NO_MATCH
//
// MessageText:
//
//  There was no match for the specified key in the index.
//
#define ERROR_NO_MATCH                   1169L

//
// MessageId: ERROR_SET_NOT_FOUND
//
// MessageText:
//
//  The property set specified does not exist on the object.
//
#define ERROR_SET_NOT_FOUND              1170L

//
// MessageId: ERROR_POINT_NOT_FOUND
//
// MessageText:
//
//  The point passed to GetMouseMovePoints is not in the buffer.
//
#define ERROR_POINT_NOT_FOUND            1171L

//
// MessageId: ERROR_NO_TRACKING_SERVICE
//
// MessageText:
//
//  The tracking (workstation) service is not running.
//
#define ERROR_NO_TRACKING_SERVICE        1172L

//
// MessageId: ERROR_NO_VOLUME_ID
//
// MessageText:
//
//  The Volume ID could not be found.
//
#define ERROR_NO_VOLUME_ID               1173L

//
// MessageId: ERROR_INVALID_VLM_OPERATION
//
// MessageText:
//
//  The specified Very Large Memory (64-bit) operation is invalid.
//
#define ERROR_INVALID_VLM_OPERATION      1174L

//
// MessageId: ERROR_UNABLE_TO_REMOVE_REPLACED
//
// MessageText:
//
//  Unable to remove the file to be replaced.
//
#define ERROR_UNABLE_TO_REMOVE_REPLACED  1175L

//
// MessageId: ERROR_UNABLE_TO_MOVE_REPLACEMENT
//
// MessageText:
//
//  Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.
//
#define ERROR_UNABLE_TO_MOVE_REPLACEMENT 1176L

//
// MessageId: ERROR_UNABLE_TO_MOVE_REPLACEMENT_2
//
// MessageText:
//
//  Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.
//
#define ERROR_UNABLE_TO_MOVE_REPLACEMENT_2 1177L

//
// MessageId: ERROR_JOURNAL_DELETE_IN_PROGRESS
//
// MessageText:
//
//  The volume change journal is being deleted.
//
#define ERROR_JOURNAL_DELETE_IN_PROGRESS 1178L

//
// MessageId: ERROR_JOURNAL_NOT_ACTIVE
//
// MessageText:
//
//  The volume change journal service is not active.
//
#define ERROR_JOURNAL_NOT_ACTIVE         1179L

//
// MessageId: ERROR_POTENTIAL_FILE_FOUND
//
// MessageText:
//
//  A file was found, but it may not be the correct file.
//
#define ERROR_POTENTIAL_FILE_FOUND       1180L

//
// MessageId: ERROR_JOURNAL_ENTRY_DELETED
//
// MessageText:
//
//  The journal entry has been deleted from the journal.
//
#define ERROR_JOURNAL_ENTRY_DELETED      1181L

//
// MessageId: ERROR_BAD_DEVICE
//
// MessageText:
//
//  The specified device name is invalid.
//
#define ERROR_BAD_DEVICE                 1200L

//
// MessageId: ERROR_CONNECTION_UNAVAIL
//
// MessageText:
//
//  The device is not currently connected but it is a remembered connection.
//
#define ERROR_CONNECTION_UNAVAIL         1201L

//
// MessageId: ERROR_DEVICE_ALREADY_REMEMBERED
//
// MessageText:
//
//  An attempt was made to remember a device that had previously been remembered.
//
#define ERROR_DEVICE_ALREADY_REMEMBERED  1202L

//
// MessageId: ERROR_NO_NET_OR_BAD_PATH
//
// MessageText:
//
//  No network provider accepted the given network path.
//
#define ERROR_NO_NET_OR_BAD_PATH         1203L

//
// MessageId: ERROR_BAD_PROVIDER
//
// MessageText:
//
//  The specified network provider name is invalid.
//
#define ERROR_BAD_PROVIDER               1204L

//
// MessageId: ERROR_CANNOT_OPEN_PROFILE
//
// MessageText:
//
//  Unable to open the network connection profile.
//
#define ERROR_CANNOT_OPEN_PROFILE        1205L

//
// MessageId: ERROR_BAD_PROFILE
//
// MessageText:
//
//  The network connection profile is corrupted.
//
#define ERROR_BAD_PROFILE                1206L

//
// MessageId: ERROR_NOT_CONTAINER
//
// MessageText:
//
//  Cannot enumerate a noncontainer.
//
#define ERROR_NOT_CONTAINER              1207L

//
// MessageId: ERROR_EXTENDED_ERROR
//
// MessageText:
//
//  An extended error has occurred.
//
#define ERROR_EXTENDED_ERROR             1208L

//
// MessageId: ERROR_INVALID_GROUPNAME
//
// MessageText:
//
//  The format of the specified group name is invalid.
//
#define ERROR_INVALID_GROUPNAME          1209L

//
// MessageId: ERROR_INVALID_COMPUTERNAME
//
// MessageText:
//
//  The format of the specified computer name is invalid.
//
#define ERROR_INVALID_COMPUTERNAME       1210L

//
// MessageId: ERROR_INVALID_EVENTNAME
//
// MessageText:
//
//  The format of the specified event name is invalid.
//
#define ERROR_INVALID_EVENTNAME          1211L

//
// MessageId: ERROR_INVALID_DOMAINNAME
//
// MessageText:
//
//  The format of the specified domain name is invalid.
//
#define ERROR_INVALID_DOMAINNAME         1212L

//
// MessageId: ERROR_INVALID_SERVICENAME
//
// MessageText:
//
//  The format of the specified service name is invalid.
//
#define ERROR_INVALID_SERVICENAME        1213L

//
// MessageId: ERROR_INVALID_NETNAME
//
// MessageText:
//
//  The format of the specified network name is invalid.
//
#define ERROR_INVALID_NETNAME            1214L

//
// MessageId: ERROR_INVALID_SHARENAME
//
// MessageText:
//
//  The format of the specified share name is invalid.
//
#define ERROR_INVALID_SHARENAME          1215L

//
// MessageId: ERROR_INVALID_PASSWORDNAME
//
// MessageText:
//
//  The format of the specified password is invalid.
//
#define ERROR_INVALID_PASSWORDNAME       1216L

//
// MessageId: ERROR_INVALID_MESSAGENAME
//
// MessageText:
//
//  The format of the specified message name is invalid.
//
#define ERROR_INVALID_MESSAGENAME        1217L

//
// MessageId: ERROR_INVALID_MESSAGEDEST
//
// MessageText:
//
//  The format of the specified message destination is invalid.
//
#define ERROR_INVALID_MESSAGEDEST        1218L

//
// MessageId: ERROR_SESSION_CREDENTIAL_CONFLICT
//
// MessageText:
//
//  The credentials supplied conflict with an existing set of credentials.
//
#define ERROR_SESSION_CREDENTIAL_CONFLICT 1219L

//
// MessageId: ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
//
// MessageText:
//
//  An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
//
#define ERROR_REMOTE_SESSION_LIMIT_EXCEEDED 1220L

//
// MessageId: ERROR_DUP_DOMAINNAME
//
// MessageText:
//
//  The workgroup or domain name is already in use by another computer on the network.
//
#define ERROR_DUP_DOMAINNAME             1221L

//
// MessageId: ERROR_NO_NETWORK
//
// MessageText:
//
//  The network is not present or not started.
//
#define ERROR_NO_NETWORK                 1222L

//
// MessageId: ERROR_CANCEL