ws2atm.h

希望我上传的这些东西可以对搞编程的程序员有点小小的帮助！谢谢！

    UCHAR TrafficType;
    UCHAR TimingRequirements;
    UCHAR ClippingSusceptability;
    UCHAR UserPlaneConnectionConfig;
} ATM_BROADBAND_BEARER_CAPABILITY_IE;

typedef ATM_BHLI ATM_BHLI_IE;

/*
 *  values used for the Layer2Mode field in struct ATM_BLLI_IE
 */
#define BLLI_L2_MODE_NORMAL         0x40
#define BLLI_L2_MODE_EXT            0x80

/*
 *  values used for the Layer3Mode field in struct ATM_BLLI_IE
 */
#define BLLI_L3_MODE_NORMAL         0x40
#define BLLI_L3_MODE_EXT            0x80

/*
 *  values used for the Layer3DefaultPacketSize field in struct ATM_BLLI_IE
 */
#define BLLI_L3_PACKET_16           0x04
#define BLLI_L3_PACKET_32           0x05
#define BLLI_L3_PACKET_64           0x06
#define BLLI_L3_PACKET_128          0x07
#define BLLI_L3_PACKET_256          0x08
#define BLLI_L3_PACKET_512          0x09
#define BLLI_L3_PACKET_1024         0x0A
#define BLLI_L3_PACKET_2048         0x0B
#define BLLI_L3_PACKET_4096         0x0C

typedef struct {
    DWORD Layer2Protocol;                 /* User information layer 2 protocol           */
    UCHAR Layer2Mode;
    UCHAR Layer2WindowSize;
    DWORD Layer2UserSpecifiedProtocol;    /* User specified layer 2 protocol information */
    DWORD Layer3Protocol;                 /* User information layer 3 protocol           */
    UCHAR Layer3Mode;
    UCHAR Layer3DefaultPacketSize;
    UCHAR Layer3PacketWindowSize;
    DWORD Layer3UserSpecifiedProtocol;    /* User specified layer 3 protocol information */
    DWORD Layer3IPI;                      /* ISO/IEC TR 9577 Initial Protocol Identifier */
    UCHAR SnapID[5];                      /* SNAP ID consisting of OUI and PID           */
} ATM_BLLI_IE;

typedef ATM_ADDRESS ATM_CALLED_PARTY_NUMBER_IE;

typedef ATM_ADDRESS ATM_CALLED_PARTY_SUBADDRESS_IE;

/*
 *  values used for the Presentation_Indication field in
 *  struct ATM_CALLING_PARTY_NUMBER_IE
 */
#define PI_ALLOWED                  0x00
#define PI_RESTRICTED               0x40
#define PI_NUMBER_NOT_AVAILABLE     0x80

/*
 *  values used for the Screening_Indicator field in
 *  struct ATM_CALLING_PARTY_NUMBER_IE
 */
#define SI_USER_NOT_SCREENED        0x00
#define SI_USER_PASSED              0x01
#define SI_USER_FAILED              0x02
#define SI_NETWORK                  0x03

typedef struct {
    ATM_ADDRESS ATM_Number;
    UCHAR       Presentation_Indication;
    UCHAR       Screening_Indicator;
} ATM_CALLING_PARTY_NUMBER_IE;

typedef ATM_ADDRESS ATM_CALLING_PARTY_SUBADDRESS_IE;

/*
 *  values used for the Location field in struct ATM_CAUSE_IE
 */
#define CAUSE_LOC_USER                      0x00
#define CAUSE_LOC_PRIVATE_LOCAL             0x01
#define CAUSE_LOC_PUBLIC_LOCAL              0x02
#define CAUSE_LOC_TRANSIT_NETWORK           0x03
#define CAUSE_LOC_PUBLIC_REMOTE             0x04
#define CAUSE_LOC_PRIVATE_REMOTE            0x05
#define CAUSE_LOC_INTERNATIONAL_NETWORK     0x07
#define CAUSE_LOC_BEYOND_INTERWORKING       0x0A

/*
 *  values used for the Cause field in struct ATM_CAUSE_IE
 */
#define CAUSE_UNALLOCATED_NUMBER                0x01
#define CAUSE_NO_ROUTE_TO_TRANSIT_NETWORK       0x02
#define CAUSE_NO_ROUTE_TO_DESTINATION           0x03
#define CAUSE_VPI_VCI_UNACCEPTABLE              0x0A
#define CAUSE_NORMAL_CALL_CLEARING              0x10
#define CAUSE_USER_BUSY                         0x11
#define CAUSE_NO_USER_RESPONDING                0x12
#define CAUSE_CALL_REJECTED                     0x15
#define CAUSE_NUMBER_CHANGED                    0x16
#define CAUSE_USER_REJECTS_CLIR                 0x17
#define CAUSE_DESTINATION_OUT_OF_ORDER          0x1B
#define CAUSE_INVALID_NUMBER_FORMAT             0x1C
#define CAUSE_STATUS_ENQUIRY_RESPONSE           0x1E
#define CAUSE_NORMAL_UNSPECIFIED                0x1F
#define CAUSE_VPI_VCI_UNAVAILABLE               0x23
#define CAUSE_NETWORK_OUT_OF_ORDER              0x26
#define CAUSE_TEMPORARY_FAILURE                 0x29
#define CAUSE_ACCESS_INFORMAION_DISCARDED       0x2B
#define CAUSE_NO_VPI_VCI_AVAILABLE              0x2D
#define CAUSE_RESOURCE_UNAVAILABLE              0x2F
#define CAUSE_QOS_UNAVAILABLE                   0x31
#define CAUSE_USER_CELL_RATE_UNAVAILABLE        0x33
#define CAUSE_BEARER_CAPABILITY_UNAUTHORIZED    0x39
#define CAUSE_BEARER_CAPABILITY_UNAVAILABLE     0x3A
#define CAUSE_OPTION_UNAVAILABLE                0x3F
#define CAUSE_BEARER_CAPABILITY_UNIMPLEMENTED   0x41
#define CAUSE_UNSUPPORTED_TRAFFIC_PARAMETERS    0x49
#define CAUSE_INVALID_CALL_REFERENCE            0x51
#define CAUSE_CHANNEL_NONEXISTENT               0x52
#define CAUSE_INCOMPATIBLE_DESTINATION          0x58
#define CAUSE_INVALID_ENDPOINT_REFERENCE        0x59
#define CAUSE_INVALID_TRANSIT_NETWORK_SELECTION 0x5B
#define CAUSE_TOO_MANY_PENDING_ADD_PARTY        0x5C
#define CAUSE_AAL_PARAMETERS_UNSUPPORTED        0x5D
#define CAUSE_MANDATORY_IE_MISSING              0x60
#define CAUSE_UNIMPLEMENTED_MESSAGE_TYPE        0x61
#define CAUSE_UNIMPLEMENTED_IE                  0x63
#define CAUSE_INVALID_IE_CONTENTS               0x64
#define CAUSE_INVALID_STATE_FOR_MESSAGE         0x65
#define CAUSE_RECOVERY_ON_TIMEOUT               0x66
#define CAUSE_INCORRECT_MESSAGE_LENGTH          0x68
#define CAUSE_PROTOCOL_ERROR                    0x6F

/*
 *  values used for the Condition portion of the Diagnostics field
 *  in struct ATM_CAUSE_IE, for certain Cause values
 */
#define CAUSE_COND_UNKNOWN                  0x00
#define CAUSE_COND_PERMANENT                0x01
#define CAUSE_COND_TRANSIENT                0x02

/*
 *  values used for the Rejection Reason portion of the Diagnostics field
 *  in struct ATM_CAUSE_IE, for certain Cause values
 */
#define CAUSE_REASON_USER                   0x00
#define CAUSE_REASON_IE_MISSING             0x04
#define CAUSE_REASON_IE_INSUFFICIENT        0x08

/*
 *  values used for the P-U flag of the Diagnostics field
 *  in struct ATM_CAUSE_IE, for certain Cause values
 */
#define CAUSE_PU_PROVIDER                   0x00
#define CAUSE_PU_USER                       0x08

/*
 *  values used for the N-A flag of the Diagnostics field
 *  in struct ATM_CAUSE_IE, for certain Cause values
 */
#define CAUSE_NA_NORMAL                     0x00
#define CAUSE_NA_ABNORMAL                   0x04

typedef struct {
    UCHAR Location;
    UCHAR Cause;
    UCHAR DiagnosticsLength;
    UCHAR Diagnostics[4];
} ATM_CAUSE_IE;

/*
 *  values used for the QOSClassForward and QOSClassBackward
 *  field in struct ATM_QOS_CLASS_IE
 */
#define QOS_CLASS0                  0x00
#define QOS_CLASS1                  0x01
#define QOS_CLASS2                  0x02
#define QOS_CLASS3                  0x03
#define QOS_CLASS4                  0x04

typedef struct {
    UCHAR QOSClassForward;
    UCHAR QOSClassBackward;
} ATM_QOS_CLASS_IE;

/*
 *  values used for the TypeOfNetworkId field in struct ATM_TRANSIT_NETWORK_SELECTION_IE
 */
#define TNS_TYPE_NATIONAL           0x40

/*
 *  values used for the NetworkIdPlan field in struct ATM_TRANSIT_NETWORK_SELECTION_IE
 */
#define TNS_PLAN_CARRIER_ID_CODE    0x01

typedef struct {
    UCHAR TypeOfNetworkId;
    UCHAR NetworkIdPlan;
    UCHAR NetworkIdLength;
    UCHAR NetworkId[1];
} ATM_TRANSIT_NETWORK_SELECTION_IE;

/*
 *  ATM specific Ioctl codes
 */
#define SIO_GET_NUMBER_OF_ATM_DEVICES   0x50160001
#define SIO_GET_ATM_ADDRESS             0xd0160002
#define SIO_ASSOCIATE_PVC               0x90160003
#define SIO_GET_ATM_CONNECTION_ID       0x50160004

/* ATM Connection Identifier */

typedef struct {
    DWORD  DeviceNumber;
    DWORD  VPI;
    DWORD  VCI;
} ATM_CONNECTION_ID;

/*
 * Input buffer format for SIO_ASSOCIATE_PVC
 */

typedef struct {
   ATM_CONNECTION_ID   PvcConnectionId;
   QOS                 PvcQos;
} ATM_PVC_PARAMS;

#include <poppack.h>

#pragma option pop /*P_O_Pop*/
#endif   /* _WS2ATM_H_ */