bd_quantal7vc.h

LCD OSD 程序用於8051 開發lcd

#define CPU_CLOCK_KHZ		22118//28600//22118//24000//11059//24
#define CPU_CLOCK_MHZ		(CPU_CLOCK_KHZ/1000)//11//24

#define MST_CLOCK_MHZ		14318

#define SERIAL_BAUD_RATE	115200//9600//57600//4800//
#define T1BaudRatePeriod	(0x100-(((unsigned long)CPU_CLOCK_KHZ * 1000+(DWORD)SERIAL_BAUD_RATE*192)/((DWORD)SERIAL_BAUD_RATE*384)))


#define UsePWMBrightness	1

//================================================
// Detect Cable
#define hwDVICable_Pin		P6_4 //P2_7
#define hwDSUBCable_Pin		P5_6 //P6_5 //P6_5

//================================================
// Led
#define hwGreenLed_Pin		P5_3//P5_4 //P5_3
#define hwAmberLed_Pin		P5_4//P5_3 //P5_4

#define hwBlacklit_Pin		P4_0 //P2_2
#define hwPanel_Pin		    P5_0 //P6_3 //P2_1       //12  V
#define hwPanel1_Pin		P6_6 //P6_2 //P2_1       //3.3 V
#define hwMute_Pin		    P4_1 //P2_1
#define hwStandby_Pin		P5_5 //P6_4


//#define hwPC5VOff_Pin		P6_0
//#define hwMainPower_Pin		(P5_2&0x01)
#define hwPC5VOff_Pin		P5_2//(P5_2&0x01)
#define hwMainPower_Pin		P6_0

//================================================
// mStar I2C
#define hwMS_ResetZ_Pin		P6_1//P1_4 //P1_3       //ASW new

#define hwMS_CSZ_Pin		P1_0//P1_1 //P1_0
#define hwMS_SCL_Pin		P1_2//P1_3 //P1_2
#define hwMS_SDA_Pin		P1_1//P1_2 //P1_1


//================================================
// I2C
#define hwI2C_SCL_Pin		P3_5      //ASW new
#define hwI2C_SDA_Pin		P3_4

#define Set_ms_ResetZ()		hwMS_ResetZ_Pin=1
#define Clr_ms_ResetZ()		hwMS_ResetZ_Pin=0

#define Set_ms_CSZ()		hwMS_CSZ_Pin=1
#define Clr_ms_CSZ()		hwMS_CSZ_Pin=0

#define Set_ms_SDA()		hwMS_SDA_Pin=1
#define Clr_ms_SDA()		hwMS_SDA_Pin=0
#define ms_SDAHi()		hwMS_SDA_Pin==1

#define Set_ms_SCL()		hwMS_SCL_Pin=1
#define Clr_ms_SCL()		hwMS_SCL_Pin=0



#define	Set_i2c_SDA()		hwI2C_SDA_Pin=1
#define	Clr_i2c_SDA()		hwI2C_SDA_Pin=0
#define i2c_SDAHi()			(hwI2C_SDA_Pin)
#define i2c_SDALo()			(!(hwI2C_SDA_Pin))

#define Set_i2c_SCL()			hwI2C_SCL_Pin=1
#define Clr_i2c_SCL()			hwI2C_SCL_Pin=0
#define i2c_SCLHi()			(hwI2C_SCL_Pin)
#define i2c_SCLLo()			(!(hwI2C_SCL_Pin))
/*
#define	Set_i2c_SDA()		hwI2C_SDA_Pin=1
#define	Clr_i2c_SDA()		hwI2C_SDA_Pin=0
#define i2c_SDAHi()		(hwI2C_SDA_Pin)
#define i2c_SDALo()		(!(hwI2C_SDA_Pin))

#define Set_i2c_SCL()		hwI2C_SCL_Pin=1
#define Clr_i2c_SCL()		hwI2C_SCL_Pin=0
#define i2c_SCLHi()		(hwI2C_SCL_Pin)
#define i2c_SCLLo()		(!(hwI2C_SCL_Pin))
*/


//Auswin17
#define hw_SetGreenLed()	hwGreenLed_Pin=0//1//0  //change for QDI17  LED on/off
#define hw_ClrGreenLed()	hwGreenLed_Pin=1//0//1

#define hw_SetAmberLed()	hwAmberLed_Pin=0//1//0
#define hw_ClrAmberLed()	hwAmberLed_Pin=1//0//1

#if 1  // change for QDI15L  0
 //new inverter control 1
#define hw_SetBlacklit()	hwBlacklit_Pin=0//1
#define hw_ClrBlacklit()	hwBlacklit_Pin=1//0
#else
#define hw_SetBlacklit()	hwBlacklit_Pin=1//1
#define hw_ClrBlacklit()	hwBlacklit_Pin=0//0
#endif
#ifdef LG19LVDS
#define hw_SetPanel()		hwPanel_Pin=1
#define hw_ClrPanel()		hwPanel_Pin=0
#else
#define hw_SetPanel()		hwPanel1_Pin=1; Delay1ms(3); hwPanel_Pin=1               //barry0923 QDI powersquence
#define hw_ClrPanel()		hwPanel_Pin=0;  Delay1ms(3); hwPanel1_Pin=0 ;  Delay1ms(200)//Delay1ms(100)
#endif
#define hw_SetMute()		hwMute_Pin=0
#define hw_ClrMute()		hwMute_Pin=1

#define hw_SetStandby()		hwStandby_Pin=0
#define hw_ClrStandby()		hwStandby_Pin=1

#define hw_SetPV5VOff() 	hwPC5VOff_Pin=0
#define hw_ClrPV5VOff()	        hwPC5VOff_Pin=1