pnlhanr.h

LCD OSD 程序用於8051 開發lcd

// for Hannstar RSDS 15"
#define	PanelName	"Hannstar RSDS 15"

#define PanelDither		6

#define PanelTTL		0
#define PanelTCON		0
#define PanelLVDS		0
#define PanelRSDS		0xFF

#define PanelDualPort		0xFF
#define PanelSwapPort		0
#define PanelSwapOddML		0
#define PanelSwapEvenML	0
#define PanelSwapOddRB		0xFF
#define PanelSwapEvenRB	0xFF
#define PanelSwapMLSB		0

#define PanelDClkDelay		8
#define PanelInvDE		0
#define PanelInvDClk		0
#define PanelInvHSync		0
#define PanelInvVSync		0

// driving current setting 0==>4mA, 1==>6mA, 2==>8mA ,3==>12mA
#define PanelDCLKCurrent	1 // Dclk current
#define PanelDECurrent		1 // DE signal current
#define PanelOddDataCurrent	1 // Odd data current
#define PanelEvenDataCurrent	1 // Even data current

#define PanelOnTiming1		100 // time between panel & data while turn on power
#define PanelOnTiming2		100 // time between data & back light while turn on power 
#define PanelOffTiming1	80 // time between back light & data while turn off power 
#define PanelOffTiming2	80 // time between data & panel while turn off power 

#define PanelHSyncWidth	32
#define PanelHSyncBackPorch	24

#define PanelVSyncWidth	2
#define PanelVSyncBackPorch	34

#define PanelHStart		(PanelHSyncWidth+PanelHSyncBackPorch)
#define PanelVStart		(PanelVSyncWidth+PanelVSyncBackPorch)
#define PanelWidth		1024
#define PanelHeight		768
#define PanelHTotal		1344
#define PanelVTotal		806

#define PanelMaxHTotal		1800
#define PanelMinHTotal		1100
#define PanelMaxVTotal		950
#define PanelMinVTotal		773
#define PanelDCLK		65
#define PanelMaxDCLK		80
#define PanelMinDCLK		50

//=================================================================
// TCON	 setting for RSDS
// driving current setting 0==>4mA, 1==>6mA, 2==>8mA ,3==>12mA
#define PanelOESPCurrent	2 // OSP/ESP drive current
#define PanelOEGCurrent	2 // OPOL/EPOL/GPOL drive current
#define PanelEINVCurrent	0 // EINV drive current
#define PanelOINVCurrent	0 // OINV drive current

#define OuputFormat		(DATI_B|G0AT_B)//Enable Auto Toggle GPO0 & data invert
// POL
#define GPO0_VStart		0x000
#define GPO0_VEnd		0x000
#define GPO0_HStart		0x068
#define GPO0_HEnd		0x222
#define GPO0_Control		0x82
//LP
#define GPO1_VStart		0
#define GPO1_VEnd		0
#define GPO1_HStart		0x407
#define GPO1_HEnd		0x428
#define GPO1_Control		0x00

// STV
#define GPO2_VStart		0x000
#define GPO2_VEnd		0x001
#define GPO2_HStart		0//x170
#define GPO2_HEnd		0//x170
#define GPO2_Control		0x00

// CLKV
#define GPO3_VStart		0
#define GPO3_VEnd		0x300
#define GPO3_HStart		0x173
#define GPO3_HEnd		0x407
#define GPO3_Control		0x01

// OE
#define GPO4_VStart		0
#define GPO4_VEnd		0
#define GPO4_HStart		0x357
#define GPO4_HEnd		0x427
#define GPO4_Control		0x00

//PVS / FSYNC
#define GPO9_VStart		0x002
#define GPO9_VEnd		0x306
#define GPO9_HStart		0x00A
#define GPO9_HEnd		0x005
#define GPO9_Control		0x08

//HSYNC
#define GPOA_VStart		0
#define GPOA_VEnd		0
#define GPOA_HStart		0 
#define GPOA_HEnd		0 
#define GPOA_Control		0