pnlcpt17rsds.h

LCD OSD 程序用於8051 開發lcd

// for CPT RSDS 17"
#define	PanelName	"CPT RSDS 17"

#define PanelDither		6

#define PanelTTL		0
#define PanelTCON		0
#define PanelLVDS		0
#define PanelRSDS		0xFF

#define PanelAURSDS		0
#define PanelQDIRSDS	0
#define PanelCPTRSDS    0xff

#define LVDS_TIMode		0x00
#define PanelDualPort		0xFF
#define PanelSwapPort		0x0
#define PanelSwapOddML		0x00
#define PanelSwapEvenML	      0x00
#define PanelSwapOddRB		0xFF
#define PanelSwapEvenRB	      0xFF
#define PanelSwapMLSB		0

#define PanelDClkDelay		0x8
#define PanelInvDClk		0x0
#define PanelInvDE		0
#define PanelInvHSync		0
#define PanelInvVSync		0

// driving current setting 0==>4mA, 1==>6mA, 2==>8mA ,3==>12mA
#define PanelDCLKCurrent	1 // Dclk current
#define PanelDECurrent		1 // DE signal current
#define PanelOddDataCurrent	1 // Odd data current
#define PanelEvenDataCurrent	1 // Even data current

#define PanelOnTiming1		100 // time between panel & data while turn on power
#define PanelOnTiming2		100 // time between data & back light while turn on power 
#define PanelOffTiming1	       80 // time between back light & data while turn off power 
#define PanelOffTiming2	       80 // time between data & panel while turn off power 

#define PanelHSyncWidth	      32
#define PanelHSyncBackPorch	40

#define PanelVSyncWidth	       2
#define PanelVSyncBackPorch	34

#define PanelHStart		(PanelHSyncWidth+PanelHSyncBackPorch)
#define PanelVStart		(PanelVSyncWidth+PanelVSyncBackPorch)
#define PanelWidth		1280
#define PanelHeight		1024
#define PanelHTotal		1688
#define PanelVTotal		1066

#define PanelMaxHTotal		1800
#define PanelMinHTotal		1500//1688
#define PanelMaxVTotal		2000
#define PanelMinVTotal		1042
#define PanelDCLK		108
#define PanelMaxDCLK		140
#define PanelMinDCLK		100

//=================================================================
// TCON	 setting for RSDS
// driving current setting 0==>4mA, 1==>6mA, 2==>8mA ,3==>12mA
#define PanelOESPCurrent	2 // OSP/ESP drive current
#define PanelOEGCurrent	      1 // OPOL/EPOL/GPOL drive current
#define PanelEINVCurrent	0 // EINV drive current
#define PanelOINVCurrent	0 // OINV drive current

#define OuputFormat		(DATI_B|G0AT_B)//Enable Auto Toggle GPO0 & data invert

// POL
#define GPO0_VStart		0x000
#define GPO0_VEnd		0x000
#define GPO0_HStart		0x258
#define GPO0_HEnd		0x258
#define GPO0_Control		0x82
//LP
#define GPO1_VStart		0x000
#define GPO1_VEnd		0x000
#define GPO1_HStart		0x284
#define GPO1_HEnd		0x2B6
#define GPO1_Control		0x00

// STV
#define GPO2_VStart		0x000
#define GPO2_VEnd		0x001
#define GPO2_HStart		0x0DE
#define GPO2_HEnd		0x0DE
#define GPO2_Control		0x00

// CLKV
#define GPO3_VStart		0x000
#define GPO3_VEnd		0x000
#define GPO3_HStart		0x0DE
#define GPO3_HEnd		0x284
#define GPO3_Control		0x01

// OE
#define GPO4_VStart		0x000
#define GPO4_VEnd		0x000
#define GPO4_HStart		0x218
#define GPO4_HEnd		0x2B5
#define GPO4_Control		0x0

//PVS / FSYNC
#define GPO8_VStart		0x000
#define GPO8_VEnd		0x000
#define GPO8_HStart		0x000
#define GPO8_HEnd		0x000
#define GPO8_Control		0x0

//PVS / FSYNC
#define GPO9_VStart		0x000
#define GPO9_VEnd		0x000
#define GPO9_HStart		0x000
#define GPO9_HEnd		0x000
#define GPO9_Control		0x0

//HSYNC
#define GPOA_VStart		0x000
#define GPOA_VEnd		0x000
#define GPOA_HStart		0x000 
#define GPOA_HEnd		0x000 
#define GPOA_Control		0x0