pnlhyu17.h

LCD OSD 程序用於8051 開發lcd

// for Samsung 170 E3
#define	PanelName	"AU 19"

#define PanelDither		8

#define PanelTTL		0
#define PanelTCON		0
#define PanelLVDS		0xFF
#define PanelRSDS		0

#define LVDS_TIMode		0xff
#define PanelDualPort		0xFF
#define PanelSwapPort		0xFF
#define PanelSwapOddML		0
#define PanelSwapEvenML		0
#define PanelSwapOddRB		0//xFF
#define PanelSwapEvenRB		0//xFF
#define PanelSwapMLSB		0

#define PanelDClkDelay		0
#define PanelInvDClk		0
#define PanelInvDE		0
#define PanelInvHSync		0
#define PanelInvVSync		0

// driving current setting 0==>4mA, 1==>6mA, 2==>8mA ,3==>12mA
#define PanelDCLKCurrent	3 // Dclk current
#define PanelDECurrent		3 // DE signal current
#define PanelOddDataCurrent	3 // Odd data current
#define PanelEvenDataCurrent	3 // Even data current

#define PanelOnTiming1		5 // time between panel & data while turn on power
#define PanelOnTiming2		250 // time between data & back light while turn on power 
#define PanelOffTiming1		5 // time between back light & data while turn off power 
#define PanelOffTiming2		5 // time between data & panel while turn off power 

#define PanelHSyncWidth		42
#define PanelHSyncBackPorch	30

#define PanelVSyncWidth		12
#define PanelVSyncBackPorch	28

#define PanelHStart		(PanelHSyncWidth+PanelHSyncBackPorch)
#define PanelVStart		(PanelVSyncWidth+PanelVSyncBackPorch)
#define PanelWidth		1280
#define PanelHeight		1024
#define PanelHTotal		1688
#define PanelVTotal		1066

#define PanelMaxHTotal		1800
#define PanelMinHTotal		1488
#define PanelMaxVTotal		2000
#define PanelMinVTotal		900 
#define PanelDCLK		108
#define PanelMaxDCLK		160
#define PanelMinDCLK		100

//=================================================================
// TCON	 setting for LVDS

#define OuputFormat		1//CLKB_B//Enable Auto Toggle GPO0

//PVS / FSYNC
#define GPO9_VStart		0x7
#define GPO9_VEnd		0x705
#define GPO9_HStart		0x0
#define GPO9_HEnd		0x0
#define GPO9_Control		0x7

//HSYNC
#define GPOA_VStart		0x006
#define GPOA_VEnd		0x408
#define GPOA_HStart		0 
#define GPOA_HEnd		0 
#define GPOA_Control		0x4