44btest.c

这是三星公司的arm7 s3c44b0x芯片的所有外设中断程序

//44BTEST : 44btest.c
#include <string.h>
#include "..\inc\option.h"
#include "..\inc\44b.h"
#include "..\inc\44blib.h"
#include "..\inc\def.h"
#include "..\inc\cache.h"
#include "..\inc\lcd.h"
#include "..\inc\lcdlib.h"
#include "..\inc\glib.h"
#include "..\inc\clcd.h"
#include "..\inc\adc.h"
#include "..\inc\uart.h"
#include "..\inc\power.h"
#include "..\inc\dma.h"
#include "..\inc\timer.h"
#include "..\inc\sio.h"
#include "..\inc\rtc.h"
#include "..\inc\etc.h"
#include "..\inc\iic.h"
#include "..\inc\eint.h"
#include "..\inc\flash.h"
#include "..\inc\iis.h"
#include "..\inc\stop.h"
#include "..\inc\idle.h"
#include "..\inc\extdma.h"
#include "..\inc\nwait.h"
#include "..\inc\Am29f800.h"
void AutoTest(void);
void Isr_Init(void);
void HaltUndef(void);
void HaltSwi(void);
void HaltPabort(void);
void HaltDabort(void);
/****************************************************************
* S3C44B0X developer's notes *
****************************************************************
1. 99.6.6:KIW: For H/W vectored interrupt test, add the codes in Isr_Init()
2. 99.8.27: Stop,SL_IDLE mode is modified.
3. 99.10.13: check KS32C41000 date:A937 or after.
4. 99.10.19: AM29LV800 flash writing routine is added
5. 00.4.25:KWT: Modify for S3C44B0X
***************************************************************/
void * function[][2]=
{
	#if (LCD_TYPE==MLCD_320_240)
	(void *)Test_LcdMono, "Lcd Mono ",
	(void *)Test_LcdG4, "Lcd G4 ",
	(void *)Test_LcdG16, "Lcd G16 ",
	#elif (LCD_TYPE==CLCD_240_320)
	(void *)Test_LcdColor, "Lcd Color ",
	#endif
	(void *)Test_SLIdleMode, "SL_IDLE Mode ",
	(void *)Test_SLIdleMode20,
	"SL_IDLE Mode20 ",
	(void *)Test_IdleMode, "IDLE Mode ",
	(void *)Test_IdleModeHard,"IDLE(hard) ",
	(void *)Test_WaitPin, "nWAIT pin ",
	(void *)Test_ZDma0Xdreq, "nXDREQ0 ",
	(void *)Test_Cache, "Cache ",
	(void *)Test_Adc, "Adc 0,1,2,3 ",
	(void *)Test_DMA_Adc, "Adc with DMA ",
	(void *)Test_Uart0, "UART 0 ",
	(void *)Test_Uart0Fifo, "UART 0 FIFO ",
	(void *)Test_Uart1, "UART 1 ",
	(void *)Test_Uart1Fifo, "UART 1 FIFO ",
	(void *)Test_SlowMode, "SLOW Mode ",
	(void *)Test_HoldMode, "HOLD Mode ",
	(void *)Test_StopMode, "STOP Mode ",
	(void *)Test_Zdma0, "Zdma0 ",
	(void *)Test_Zdma1, "Zdma1 ",
	(void *)Test_Sio, "SIO Tx/Rx ",
	(void *)Test_SIOTX_BDMA0,"SIO Tx BDMA0 ",
	(void *)Test_SIORX_BDMA1,"SIO Rx BDMA1 ",
	(void *)Test_WDTimer, "WDTimer ",
	(void *)Display_Rtc, "RTC(display) ",
	(void *)Test_Rtc_Alarm, "RTC(Test) ",
	(void *)Test_Rtc_Tick, "RTC Tick ",
	(void *)Test_Iic, "IIC(KS24C080) ",
	(void *)Test_Iis, "IIS(uda1341) ",
	(void *)Iis_Tx, "IIS Tx(Slave) ",
	(void *)Iis_Rx, "IIS Rx(Master) ",
	(void *)Test_TimerInt, "Timer Int ",
	(void *)Test_Timer, "Tout test ",
	(void *)Test_Eint, "Ext. Int ",
	(void *)Etc, "Etc... ",
	(void *)Test_PLL, "Change PLL ",
	(void *)Test_UartAFC_Tx, "Test AFC(Tx) ",
	(void *)Test_UartAFC_Rx, "Test AFC(Rx) ",
	(void *)ProgramFlash, "Write flash ", 0,0
};
void Main(void)
{
	int i;
	rSYSCFG=CACHECFG;
	#if (PLLON==1)
		ChangePllValue(PLL_M,PLL_P,PLL_S);
	#endif
	//_ctype_init(); //to use ctype.h
	Port_Init();
	Isr_Init();
	Uart_Init(0,115200);
	//rSBUSCON=(1<<31)|(3<<6)|(2<<4)|(1<<2)|(0); //nBREQ>BDMA>ZDMA>LCD_DMA
	Uart_Select(0);
	Delay(0); //calibrate Delay()
	while(1)
	{
		i=0;
		Uart_Printf("\n\nS3C44B0X Test Program Ver 0.00 rSYSCFG=0x%x MCLK=%d\n\n",rSYSCFG,MCLK);
		while(1)
		{ //display menu
			Uart_Printf("%2d:%s",i,function[i][1]);
			i++;
			if((int)(function[i][0])==0)
			{
				Uart_Printf("\n");
				break;
			}
			if((i%4)==0)
			Uart_Printf("\n");
		}
		Uart_Printf("\nSelect the function to test?");
		i=Uart_GetIntNum();
		Uart_Printf("\n");
		if(i>=0 && (i<(sizeof(function)/8)) )
			( (void (*)(void)) (function[i][0]) )();
	}
}
void Isr_Init(void)
{
	pISR_UNDEF=(unsigned)HaltUndef;
	pISR_SWI =(unsigned)HaltSwi;
	pISR_PABORT=(unsigned)HaltPabort;
	pISR_DABORT=(unsigned)HaltDabort;
	//rINTCON=0x1; // Vectored Int. IRQ enable,FIQ disable
	rINTCON=0x5; // Non-vectored,IRQ enable,FIQ disable
	rINTMOD=0x0; // All=IRQ mode
	rINTMSK=BIT_GLOBAL; // All interrupt is masked.
}
void HaltUndef(void)
{
	Uart_Printf("Undefined instruction exception!!!\n");
	while(1);
}
void HaltSwi(void)
{
	Uart_Printf("SWI exception!!!\n");
	while(1);
}
void HaltPabort(void)
{
	Uart_Printf("Pabort exception!!!\n");
	while(1);
}
void HaltDabort(void)
{
	Uart_Printf("Dabort exception!!!\n");
	while(1);
}