⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 busybox-0.51-env.ppc.patch

📁 这是嵌入式linux的busybox源代码
💻 PATCH
📖 第 1 页 / 共 2 页
字号:
+		return (-1);+	}++	if (lseek(fd, CFG_ENV_OFFSET, SEEK_SET) == (off_t)-1) {+		perror(device);+		return (-1);+	}++	if (mode == O_WRONLY) {+		if (write(fd, &environment, CFG_ENV_SIZE) != CFG_ENV_SIZE) {+			perror(device);+			return (-1);+		}+	} else {+		if (read (fd, &environment, CFG_ENV_SIZE) != CFG_ENV_SIZE) {+			perror(device);+			return (-1);+		}+	}++	if (close(fd)) {+		perror(device);+		return (-1);+	}++	/* everything ok */+	return (0);+}++/*+ * s1 is either a simple 'name', or a 'name=value' pair.+ * s2 is a 'name=value' pair.+ * If the names match, return the value of s2, else NULL.+ */++static char *+envmatch (char *s1, char *s2)+{++	while (*s1 == *s2++)+		if (*s1++ == '=')+			return(s2);+	if (*s1 == '\0' && *(s2-1) == '=')+		return(s2);+	return(NULL);+}++/*+ * Prevent confusion if running from erased flash memory+ */+static int env_init(void)+{+	if (!valid) {+		/* read environment from FLASH to local buffer */+		if (flash_io (O_RDONLY)) {+			return (errno);+		}+		valid = 1;+	}++	if (crc32(0, environment.data, ENV_SIZE) != environment.crc) {+		fprintf (stderr, "*** Warning - bad CRC, using defaults\n\n");+		memcpy (&environment.data,+			default_environment,+			sizeof(default_environment));+	}++	return (0);+}+++/*+ * This file is derived from crc32.c from the zlib-1.1.3 distribution+ * by Jean-loup Gailly and Mark Adler.+ */++/* crc32.c -- compute the CRC-32 of a data stream+ * Copyright (C) 1995-1998 Mark Adler+ * For conditions of distribution and use, see copyright notice in zlib.h + */++#include "zlib.h"++#define local static+#define ZEXPORT	/* empty */++#ifdef DYNAMIC_CRC_TABLE++local int crc_table_empty = 1;+local uLongf crc_table[256];+local void make_crc_table OF((void));++/*+  Generate a table for a byte-wise 32-bit CRC calculation on the polynomial:+  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.++  Polynomials over GF(2) are represented in binary, one bit per coefficient,+  with the lowest powers in the most significant bit.  Then adding polynomials+  is just exclusive-or, and multiplying a polynomial by x is a right shift by+  one.  If we call the above polynomial p, and represent a byte as the+  polynomial q, also with the lowest power in the most significant bit (so the+  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,+  where a mod b means the remainder after dividing a by b.++  This calculation is done using the shift-register method of multiplying and+  taking the remainder.  The register is initialized to zero, and for each+  incoming bit, x^32 is added mod p to the register if the bit is a one (where+  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by+  x (which is shifting right by one and adding x^32 mod p if the bit shifted+  out is a one).  We start with the highest power (least significant bit) of+  q and repeat for all eight bits of q.++  The table is simply the CRC of all possible eight bit values.  This is all+  the information needed to generate CRC's on data a byte at a time for all+  combinations of CRC register values and incoming bytes.+*/+local void make_crc_table()+{+  uLong c;+  int n, k;+  uLong poly;            /* polynomial exclusive-or pattern */+  /* terms of polynomial defining this crc (except x^32): */+  static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};++  /* make exclusive-or pattern from polynomial (0xedb88320L) */+  poly = 0L;+  for (n = 0; n < sizeof(p)/sizeof(Byte); n++)+    poly |= 1L << (31 - p[n]);+ +  for (n = 0; n < 256; n++)+  {+    c = (uLong)n;+    for (k = 0; k < 8; k++)+      c = c & 1 ? poly ^ (c >> 1) : c >> 1;+    crc_table[n] = c;+  }+  crc_table_empty = 0;+}+#else+/* ========================================================================+ * Table of CRC-32's of all single-byte values (made by make_crc_table)+ */+local const uLongf crc_table[256] = {+  0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,+  0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,+  0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,+  0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,+  0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,+  0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,+  0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,+  0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,+  0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,+  0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,+  0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,+  0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,+  0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,+  0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,+  0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,+  0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,+  0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,+  0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,+  0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,+  0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,+  0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,+  0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,+  0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,+  0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,+  0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,+  0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,+  0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,+  0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,+  0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,+  0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,+  0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,+  0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,+  0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,+  0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,+  0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,+  0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,+  0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,+  0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,+  0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,+  0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,+  0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,+  0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,+  0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,+  0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,+  0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,+  0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,+  0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,+  0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,+  0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,+  0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,+  0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,+  0x2d02ef8dL+};+#endif++#if 0+/* =========================================================================+ * This function can be used by asm versions of crc32()+ */+const uLongf * ZEXPORT get_crc_table()+{+#ifdef DYNAMIC_CRC_TABLE+  if (crc_table_empty) make_crc_table();+#endif+  return (const uLongf *)crc_table;+}+#endif++/* ========================================================================= */+#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);+#define DO2(buf)  DO1(buf); DO1(buf);+#define DO4(buf)  DO2(buf); DO2(buf);+#define DO8(buf)  DO4(buf); DO4(buf);++/* ========================================================================= */+uLong ZEXPORT crc32(crc, buf, len)+    uLong crc;+    const Bytef *buf;+    uInt len;+{+    if (buf == Z_NULL) return 0L;+#ifdef DYNAMIC_CRC_TABLE+    if (crc_table_empty)+      make_crc_table();+#endif+    crc = crc ^ 0xffffffffL;+    while (len >= 8)+    {+      DO8(buf);+      len -= 8;+    }+    if (len) do {+      DO1(buf);+    } while (--len);+    return crc ^ 0xffffffffL;+}+ diff -u busybox-0.51/setenv.h.ORIG busybox-0.51/setenv.h--- busybox-0.51/setenv.h.env	Thu Aug 16 01:44:28 2001+++ busybox-0.51/setenv.h	Thu Aug 16 01:48:19 2001@@ -0,0 +1,61 @@+/*+ * (C) Copyright 2000+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.+ *+ * See file CREDITS for list of people who contributed to this+ * project.+ *+ * This program is free software; you can redistribute it and/or+ * modify it under the terms of the GNU General Public License as+ * published by the Free Software Foundation; either version 2 of+ * the License, or (at your option) any later version.+ *+ * This program is distributed in the hope that it will be useful,+ * but WITHOUT ANY WARRANTY; without even the implied warranty of+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the+ * GNU General Public License for more details.+ *+ * You should have received a copy of the GNU General Public License+ * along with this program; if not, write to the Free Software+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,+ * MA 02111-1307 USA+ */++#ifndef	_SETENV_H_+#define	_SETENV_H_++#include "kernel_config.h"++#define CONFIG_BAUDRATE		115200+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/+#define CONFIG_BOOTCOMMAND							\+	"bootp; " 								\+	"setenv bootargs root=/dev/nfs nfsroot=$(serverip):$(rootpath) " 	\+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " 	\+	"bootm" ++#if defined(CONFIG_TQM8xxL) || defined(CONFIG_C2MON) || defined(CONFIG_UT850VDSL)+#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/++#elif defined(CONFIG_IVMS8) || defined(CONFIG_IVML24)+#define CFG_ENV_OFFSET		0x7A000+#define CFG_ENV_SIZE		0x2000++#elif defined(CONFIG_HERMES)+#define CFG_ENV_OFFSET		0x4000+#define CFG_ENV_SIZE		0x2000++#elif defined(CONFIG_CU824)+#define CFG_ENV_ADDR		0xFFFC0000+#define CFG_ENV_SIZE		0x4000+#define CFG_ENV_OFFSET		0+#define CFG_ENV_SECT_SIZE	0x40000	/* Size of the Environment Sector	*/++#else+#error	Missing Flash Environment Configuration+#endif++extern char *fw_getenv  (char *name);++#endif	/* _SETENV_H_ */+ diff -u busybox-0.51/usage.h.ORIG busybox-0.51/usage.h--- busybox-0.51/usage.h.ORIG	Sat Jun  2 17:26:58 2001+++ busybox-0.51/usage.h	Sat Jun  2 17:51:47 2001@@ -1213,6 +1213,15 @@ #define poweroff_full_usage \ 	"Halt the system and request that the kernel shut off the power." +#define printenv_trivial_usage \+	" [VAR ...]\n"+#define printenv_full_usage \+	"Prints the variable(s) VAR of the firmware environment,\n" \+	"or all variables, if no VAR is specified.\n"+#define printenv_example_usage \+	"$ printenv baudrate\n" \+	"115200\n"+ #define printf_trivial_usage \ 	"FORMAT [ARGUMENT...]" #define printf_full_usage \@@ -1336,6 +1345,14 @@ #define sed_example_usage \ 	"$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ 	"bar\n"++#define setenv_trivial_usage \+	" VAR [VALUE ...]\n"+#define setenv_full_usage \+	"Sets the value of the firmware environment variable VAR to VALUE.\n" \+	"Deletes VAR from the firmware environment, when no VALUE is specified.\n"+#define setenv_example_usage \+	"$ setenv baudrate 9600\n"  #define setkeycodes_trivial_usage \ 	"SCANCODE KEYCODE ..."

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -