📄 locerr.hlp
字号:
-----------------------------------------------------------------
The masked subsystem block LOCALIZER STEADY-STATE ERROR, from the
sublibrary ILS of the library NAVLIB, can be used to simulate a
steady-state error in the localizer signals, caused by the ground
equipment. The error is determined according to ICAO guidelines.
Both localizer misalignment and steady-state errors in the loca-
lizer sensitivity are taken into account in this block. See refs.
[1] or [2], or FDC 1.2 manual, for more info about the theore-
tical backgrounds.
Inputsignal:
============
nominal value of localizer current iloc, [鍭]
Outputsignal:
=============
localizer current iloc, including steady-state errors, [鍭]
Block-parameters:
=================
* performance category (1, 2, or 3, see ref.[2] or FDC 1.2
manual for more info)
* percentage of maximum allowable error in localizer sensitivity
(iloc = Sloc * Gamma_loc, where iloc is localizer current
through cockpit instrument, Gamma_loc is the angle between the
line from projection of aircraft's c.g. on ground to localizer
antenna and runway centerline, Sloc is the localizer sensiti-
vity)
* percentage of maximum allowable localizer misalignment
* distance from runway threshold to localizer antenna, [m]
The block-parameters can be specified in dialog-boxes which
appear after double-clicking the block LOCerr.
References:
===========
[1] Approach and Landing Simulation. AGARD report 632, Ames, 1975
[2] A Simulink environment for Flight Dynamics and Control
analysis - Application to the DHC-2 'Beaver', part I: Im-
plementation of a model library in Simulink. Delft Univer-
sity of Technology, September 1993
More info:
==========
See ILS.HLP for details about the nominal ILS signals. See also
GSERR.HLP for more info about the determination of steady-state
errors in the glideslope signal.
See also the subsystem 'ILS example' and its help-text
ILSXMPL.HLP, to find out how the noise-blocks can be connected
to the masked subsystem block ILS.
-----------------------------------------------
The FDC toolbox, Copyright Marc Rauw 1994-1998.
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -