📄 smsw.htm
字号:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"><HTML><HEAD><TITLE>80386 Programmer's Reference Manual -- Opcode SMSW</TITLE></HEAD><BODY><B>up:</B> <A HREF="c17.htm">Chapter 17 -- 80386 Instruction Set</A><BR><B>prev:</B><A HREF="SLDT.htm"> SLDT Store Local Descriptor Table Register</A><BR><B>next:</B><A HREF="STC.htm"> STC Set Carry Flag</A><P><HR><P><H1>SMSW -- Store Machine Status Word</H1><PRE>Opcode Instruction Clocks Description0F 01 /4 SMSW r/m16 2/3,pm=2/2 Store machine status word to EA word</PRE><H2>Operation</H2><PRE>r/m16 := MSW;</PRE><H2>Description</H2>SMSW stores the machine status word (part of CR0) in the two-byte registeror memory location indicated by the effective address operand.<H2>Flags Affected</H2>None<H2>Protected Mode Exceptions</H2>#GP(0) if the result is in a nonwritable segment; #GP(0) for an illegalmemory operand effective address in the CS, DS, ES, FS, or GS segments;#SS(0) for an illegal address in the SS segment; #PF(fault-code) for a pagefault<H2>Real Address Mode Exceptions</H2>Interrupt 13 if any part of the operand would lie outside of the effectiveaddress space from 0 to 0FFFFH<H2>Virtual 8086 Mode Exceptions</H2>Same exceptions as in Real Address Mode; #PF(fault-code) for a page fault<H2>Notes</H2>This instruction is provided for compatibility with the 80286; 80386programs should use <A HREF="MOVRS.htm">MOV</A> ..., CR0.<P><HR><P><B>up:</B> <A HREF="c17.htm">Chapter 17 -- 80386 Instruction Set</A><BR><B>prev:</B><A HREF="SLDT.htm"> SLDT Store Local Descriptor Table Register</A><BR><B>next:</B><A HREF="STC.htm"> STC Set Carry Flag</A></BODY>⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -