makefile.old

Altera recommends the following system configuration: * Pentium II 400 with 512-MB system memory (fa

# This Makefile is for the Devel::DProf extension to perl.
#
# It was generated automatically by MakeMaker version
# 5.45 (Revision: 1.222) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
#	ANY CHANGES MADE HERE WILL BE LOST!
#
#   MakeMaker ARGV: (q[INSTALLDIRS=perl], q[LIBPERL_A=libperl.a])
#
#   MakeMaker Parameters:

#	DEFINE => q[-DPERLDBf_NONAME=0x40 -DPERLDBf_GOTO=0x80 -DG_NODEBUG=32 -DPL_NEEDED]
#	DISTNAME => q[DProf]
#	MAN3PODS => {  }
#	NAME => q[Devel::DProf]
#	VERSION_FROM => q[DProf.pm]
#	XSPROTOARG => q[-noprototypes]
#	clean => { FILES=>q[tmon.out t/tmon.out t/err] }
#	dist => { DIST_DEFAULT=>q[all tardist], COMPRESS=>q[gzip -9f], SUFFIX=>q[gz] }

# --- MakeMaker post_initialize section:


# --- MakeMaker const_config section:

# These definitions are from config.sh (via ../../../lib/Config.pm)

# They may have been overridden via Makefile.PL or on the command line
AR = ar
CC = cc
CCCDLFLAGS = -KPIC
CCDLFLAGS =  
DLEXT = so
DLSRC = dl_dlopen.xs
LD = cc
LDDLFLAGS = -G -L/usr/local/lib -L/local/SUNWspro/WS6U1/lib
LDFLAGS =  -L/usr/local/lib -L/local/SUNWspro/WS6U1/lib 
LIBC = /lib/libc.so
LIB_EXT = .a
OBJ_EXT = .o
OSNAME = solaris
OSVERS = 2.6
RANLIB = :
SO = so
EXE_EXT = 
FULL_AR = /usr/ccs/bin/ar


# --- MakeMaker constants section:
AR_STATIC_ARGS = cr
NAME = Devel::DProf
DISTNAME = DProf
NAME_SYM = Devel_DProf
VERSION = 20000000.00_00
VERSION_SYM = 20000000_00_00
XS_VERSION = 20000000.00_00
INST_BIN = blib/bin
INST_EXE = blib/script
INST_LIB = ../../../lib
INST_ARCHLIB = ../../../lib
INST_SCRIPT = blib/script
PREFIX = /local/solaris
INSTALLDIRS = perl
INSTALLPRIVLIB = $(PREFIX)/lib/perl5/5.6.1
INSTALLARCHLIB = $(PREFIX)/lib/perl5/5.6.1/sun4-solaris
INSTALLSITELIB = $(PREFIX)/lib/perl5/site_perl/5.6.1
INSTALLSITEARCH = $(PREFIX)/lib/perl5/site_perl/5.6.1/sun4-solaris
INSTALLBIN = $(PREFIX)/bin
INSTALLSCRIPT = $(PREFIX)/bin
PERL_LIB = ../../../lib
PERL_ARCHLIB = ../../../lib
SITELIBEXP = /local/solaris/lib/perl5/site_perl/5.6.1
SITEARCHEXP = /local/solaris/lib/perl5/site_perl/5.6.1/sun4-solaris
LIBPERL_A = libperl.a
FIRST_MAKEFILE = Makefile
MAKE_APERL_FILE = Makefile.aperl
PERLMAINCC = $(CC)
PERL_SRC = ../../..
PERL_INC = ../../..
PERL = ../../../miniperl
FULLPERL = ../../../perl
FULL_AR = /usr/ccs/bin/ar

VERSION_MACRO = VERSION
DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\"
XS_VERSION_MACRO = XS_VERSION
XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\"
PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree -Drealloc=Perl_realloc -Dcalloc=Perl_calloc

MAKEMAKER = ../../../lib/ExtUtils/MakeMaker.pm
MM_VERSION = 5.45

# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle).
# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle)
# ROOTEXT = Directory part of FULLEXT with leading slash (eg /DBD)  !!! Deprecated from MM 5.32  !!!
# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar)
# DLBASE  = Basename part of dynamic library. May be just equal BASEEXT.
FULLEXT = Devel/DProf
BASEEXT = DProf
PARENT_NAME = Devel
DLBASE = $(BASEEXT)
VERSION_FROM = DProf.pm
DEFINE = -DPERLDBf_NONAME=0x40 -DPERLDBf_GOTO=0x80 -DG_NODEBUG=32 -DPL_NEEDED
OBJECT = $(BASEEXT)$(OBJ_EXT)
LDFROM = $(OBJECT)
LINKTYPE = dynamic

# Handy lists of source code files:
XS_FILES= DProf.xs
C_FILES = DProf.c
O_FILES = DProf.o
H_FILES = 
HTMLLIBPODS    = 
HTMLSCRIPTPODS = 
MAN1PODS = 
MAN3PODS = 
HTMLEXT = html
INST_MAN1DIR = blib/man1
INSTALLMAN1DIR = $(PREFIX)/man/man1
MAN1EXT = 1
INST_MAN3DIR = blib/man3
INSTALLMAN3DIR = $(PREFIX)/man/man3
MAN3EXT = 3
PERM_RW = 644
PERM_RWX = 755

# work around a famous dec-osf make(1) feature(?):
makemakerdflt: all

.SUFFIXES: .xs .c .C .cpp .cxx .cc $(OBJ_EXT)

# Nick wanted to get rid of .PRECIOUS. I don't remember why. I seem to recall, that
# some make implementations will delete the Makefile when we rebuild it. Because
# we call false(1) when we rebuild it. So make(1) is not completely wrong when it
# does so. Our milage may vary.
# .PRECIOUS: Makefile    # seems to be not necessary anymore

.PHONY: all config static dynamic test linkext manifest

# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)/Config.pm $(PERL_INC)/config.h

# Where to put things:
INST_LIBDIR      = $(INST_LIB)/Devel
INST_ARCHLIBDIR  = $(INST_ARCHLIB)/Devel

INST_AUTODIR     = $(INST_LIB)/auto/$(FULLEXT)
INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT)

INST_STATIC  = $(INST_ARCHAUTODIR)/$(BASEEXT)$(LIB_EXT)
INST_DYNAMIC = $(INST_ARCHAUTODIR)/$(DLBASE).$(DLEXT)
INST_BOOT    = $(INST_ARCHAUTODIR)/$(BASEEXT).bs

EXPORT_LIST = 

PERL_ARCHIVE = 

PERL_ARCHIVE_AFTER = 

TO_INST_PM = DProf.pm

PM_TO_BLIB = DProf.pm \
	$(INST_LIBDIR)/DProf.pm


# --- MakeMaker tool_autosplit section:

# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
AUTOSPLITFILE = $(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" -e 'use AutoSplit;autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1) ;'


# --- MakeMaker tool_xsubpp section:

XSUBPPDIR = ../../../lib/ExtUtils
XSUBPP = $(XSUBPPDIR)/xsubpp
XSPROTOARG = -noprototypes
XSUBPPDEPS = $(XSUBPPDIR)/typemap $(XSUBPP)
XSUBPPARGS = -typemap $(XSUBPPDIR)/typemap


# --- MakeMaker tools_other section:

SHELL = /bin/sh
CHMOD = chmod
CP = cp
LD = cc
MV = mv
NOOP = $(SHELL) -c true
RM_F = rm -f
RM_RF = rm -rf
TEST_F = test -f
TOUCH = touch
UMASK_NULL = umask 0
DEV_NULL = > /dev/null 2>&1

# The following is a portable way to say mkdir -p
# To see which directories are created, change the if 0 to if 1
MKPATH = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e mkpath

# This helps us to minimize the effect of the .exists files A yet
# better solution would be to have a stable file in the perl
# distribution with a timestamp of zero. But this solution doesn't
# need any changes to the core distribution and works with older perls
EQUALIZE_TIMESTAMP = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e eqtime

# Here we warn users that an old packlist file was found somewhere,
# and that they should call some uninstall routine
WARN_IF_OLD_PACKLIST = $(PERL) -we 'exit unless -f $$ARGV[0];' \
-e 'print "WARNING: I have found an old package in\n";' \
-e 'print "\t$$ARGV[0].\n";' \
-e 'print "Please make sure the two installations are not conflicting\n";'

UNINST=0
VERBINST=0

MOD_INSTALL = $(PERL) -I$(INST_LIB) -I$(PERL_LIB) -MExtUtils::Install \
-e "install({@ARGV},'$(VERBINST)',0,'$(UNINST)');"

DOC_INSTALL = $(PERL) -e '$$\="\n\n";' \
-e 'print "=head2 ", scalar(localtime), ": C<", shift, ">", " L<", $$arg=shift, "|", $$arg, ">";' \
-e 'print "=over 4";' \
-e 'while (defined($$key = shift) and defined($$val = shift)){print "=item *";print "C<$$key: $$val>";}' \
-e 'print "=back";'

UNINSTALL =   $(PERL) -MExtUtils::Install \
-e 'uninstall($$ARGV[0],1,1); print "\nUninstall is deprecated. Please check the";' \
-e 'print " packlist above carefully.\n  There may be errors. Remove the";' \
-e 'print " appropriate files manually.\n  Sorry for the inconveniences.\n"'


# --- MakeMaker dist section:

DISTVNAME = $(DISTNAME)-$(VERSION)
TAR  = tar
TARFLAGS = cvf
ZIP  = zip
ZIPFLAGS = -r
COMPRESS = gzip -9f
SUFFIX = gz
SHAR = shar
PREOP = @$(NOOP)
POSTOP = @$(NOOP)
TO_UNIX = @$(NOOP)
CI = ci -u
RCS_LABEL = rcs -Nv$(VERSION_SYM): -q
DIST_CP = best
DIST_DEFAULT = all tardist


# --- MakeMaker macro section:


# --- MakeMaker depend section:


# --- MakeMaker cflags section:

CCFLAGS = -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
OPTIMIZE = -O
PERLTYPE = 
MPOLLUTE = 


# --- MakeMaker const_loadlibs section:

# Devel::DProf might depend on some other libraries:
# See ExtUtils::Liblist for details
#
LD_RUN_PATH = 


# --- MakeMaker const_cccmd section:
CCCMD = $(CC) -c $(INC) $(CCFLAGS) $(OPTIMIZE) \
	$(PERLTYPE) $(MPOLLUTE) $(DEFINE_VERSION) \
	$(XS_DEFINE_VERSION)

# --- MakeMaker post_constants section:


# --- MakeMaker pasthru section:

PASTHRU = LIB="$(LIB)"\
	LIBPERL_A="$(LIBPERL_A)"\
	LINKTYPE="$(LINKTYPE)"\
	PREFIX="$(PREFIX)"\
	OPTIMIZE="$(OPTIMIZE)"


# --- MakeMaker c_o section:

.c$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.c

.C$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.C

.cpp$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.cpp

.cxx$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.cxx

.cc$(OBJ_EXT):
	$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.cc


# --- MakeMaker xs_c section:

.xs.c:
	$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c


# --- MakeMaker xs_o section:

.xs$(OBJ_EXT):
	$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $*.xs > $*.xsc && $(MV) $*.xsc $*.c
	$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.c


# --- MakeMaker top_targets section:

#all ::	config $(INST_PM) subdirs linkext manifypods

all :: pure_all htmlifypods manifypods
	@$(NOOP)

pure_all :: config pm_to_blib subdirs linkext
	@$(NOOP)

subdirs :: $(MYEXTLIB)
	@$(NOOP)

config :: Makefile $(INST_LIBDIR)/.exists
	@$(NOOP)

config :: $(INST_ARCHAUTODIR)/.exists
	@$(NOOP)

config :: $(INST_AUTODIR)/.exists
	@$(NOOP)

$(INST_AUTODIR)/.exists :: ../../../perl.h
	@$(MKPATH) $(INST_AUTODIR)
	@$(EQUALIZE_TIMESTAMP) ../../../perl.h $(INST_AUTODIR)/.exists

	-@$(CHMOD) $(PERM_RWX) $(INST_AUTODIR)

$(INST_LIBDIR)/.exists :: ../../../perl.h
	@$(MKPATH) $(INST_LIBDIR)
	@$(EQUALIZE_TIMESTAMP) ../../../perl.h $(INST_LIBDIR)/.exists

	-@$(CHMOD) $(PERM_RWX) $(INST_LIBDIR)

$(INST_ARCHAUTODIR)/.exists :: ../../../perl.h
	@$(MKPATH) $(INST_ARCHAUTODIR)
	@$(EQUALIZE_TIMESTAMP) ../../../perl.h $(INST_ARCHAUTODIR)/.exists

	-@$(CHMOD) $(PERM_RWX) $(INST_ARCHAUTODIR)

help:
	perldoc ExtUtils::MakeMaker

Version_check:
	@$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) \
		-MExtUtils::MakeMaker=Version_check \
		-e "Version_check('$(MM_VERSION)')"


# --- MakeMaker linkext section:

linkext :: $(LINKTYPE)
	@$(NOOP)


# --- MakeMaker dlsyms section:


# --- MakeMaker dynamic section:

## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make dynamic"
#dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT) $(INST_PM)
dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT)
	@$(NOOP)


# --- MakeMaker dynamic_bs section:

BOOTSTRAP = DProf.bs

# As Mkbootstrap might not write a file (if none is required)
# we use touch to prevent make continually trying to remake it.
# The DynaLoader only reads a non-empty file.
$(BOOTSTRAP): Makefile  $(INST_ARCHAUTODIR)/.exists
	@echo "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))"
	@$(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" \
		-MExtUtils::Mkbootstrap \
		-e "Mkbootstrap('$(BASEEXT)','$(BSLOADLIBS)');"
	@$(TOUCH) $(BOOTSTRAP)
	$(CHMOD) $(PERM_RW) $@

$(INST_BOOT): $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists
	@rm -rf $(INST_BOOT)
	-cp $(BOOTSTRAP) $(INST_BOOT)
	$(CHMOD) $(PERM_RW) $@