changelog

eCos/RedBoot for勤研ARM AnywhereII(4510) 含全部源代码

2003-10-09  Roland Cassebohm  <[e-mail]>

	* src/rtl8201.c: New file. Added RTL8201 PHY support.
	* cdl/ks32c5000_eth.cdl: CDL to allow configuration of the above.

2003-10-09  Roland Cassebohm  <[e-mail]> 
 
 	* src/ks5000_ether.c: Set ifStats.description only one time while
        initialization, it will never change.
        Set ifStats.supports_dot3 to 1, to support snmp mib dot3.
        Set ifStats.snmp_chipset to be interpreted as "nullobjid" in the
        snmp dot3 agent. It is not a string it is an oid as byte array.
        The link status of the phy are read while initializion and in the
        command ETH_DRV_GET_IF_STATS to be up to date without phy interrupt
        support.
        Change firstTime in installInterrupts() to be static to be sure
        interrupts will only one time be installed.
 
2003-06-24  Jonathan Larmour  <[e-mail]>

	* src/ks5000_ether.c: Some tidies of the previous changes.
	* cdl/ks32c5000_eth.cdl: Clarify option description and rename
	CYGVAR_DEVS_ETH_ARM_KS32C5000_REDBOOT_HOLDS_ESA_ETH0 to
	CYGSEM_DEVS_ETH_ARM_KS32C5000_REDBOOT_HOLDS_ESA_ETH0.

2003-05-26  Chris Garry  <[e-mail]>
	
	* cdl/ks32c5000_eth.cdl: Added support for MAC address to be used
	from RedBoot's FLASH configuration data.
	* src/ks5000_ether.c: Updated driver to work with LWIP stack as
	well as the BSD stack. Added support for MAC address to be used
	from RedBoot's FLASH configuration data.

2003-04-08  Michael Checky  <[e-mail]>

	* cdl/ks32c5000_eth.cdl: CYGINT_DEVS_ETH_ARM_KS32C5000_PHY can now
	be zero or one to allow for no PHY station management control.
	* src/ks5000_ether.c: Changed '#if HavePHY' to
	'#if CYGINT_DEVS_ETH_ARM_KS32C5000_PHY'

2003-03-27  Jay Foster   <[e-mail]>

	* src/ics1890.c: Added configurable PHY MII address.
	* src/lxt970.c: Added configurable PHY MII address.
	* src/lxt972.c: Added configurable PHY MII address.
	* cdl/ks32c5000_eth.cdl: CDL to allow configuration of the PHY
	MII address.  Documented support for ICS1893AF PHY.
	* src/ks5000_ether.c: Added configurable PHY MII address.
	Fixed local definition of eth_drv_init() macro (produces no code
	change).  Fixed strncpy()s for the ETH_DRV_GET_IF_STATS IOCTL to
	leave room for the NUL termination character and use parenthesis
	with the 'sizeof' operator.  Added ETH_DRV_SET_MAC_ADDRESS IOCTL
	support to allow setting the MAC (ESA) address from the application.
	Fixed to only attach the CYGNUM_HAL_INTERRUPT_EXT0 if the
	HavePHYinterrupt conditional is defined.  This prevents unhandled
	interrupts from getting through when HavePHYinterrupt is not defined.

2003-03-26  Chris Garry  <[e-mail]>

	* cdl/ks32c5000_eth.cdl
	* src/ks5000_ether.c: Added CDL control for level of driver
	debug output.

2003-03-20  Chris Garry  <[e-mail]>

	* src/ks5000_ether.c:
	Added volatile to *rxReadPointer, *txDonePointer and
	*txWritePointer's definitions.

2003-02-20  Chris Garry  <[e-mail]>

	* src/ks5000_ether.c:
	Removed line setting up programmable I/O pins as debug outputs.

2002-11-05  Jonathan Larmour  <[e-mail]>

	* cdl/ks32c5000_eth.cdl: Ensure exactly 1 PHY enabled.

2002-11-05  Chris Garry  <[e-mail]>

	* src/lxt972.c: New file. Added LXT972 PHY support.
	* cdl/ks32c5000_eth.cdl: CDL to allow configuration of the above.

	* src/ks5000_ether.c: (CYG_BYTEORDER == CYG_MSBFIRST) used to swap
	endian in BDMARxConfigVar declaration and txWritePointer transmit
	descriptor reserved fields setup.
	(ks32c5000_eth_poll): Added call to BDMA Rx isr routine.

2002-10-10  Andrew Lunn  <[e-mail]>

	* cdl/ks32c5000_eth.cdl
	* src/ks5000_ether.c (ks32c5000_eth_get_recv_buffer): Use the 
	cyg_crc32 function in the CRC package.

2002-07-10  Gary Thomas  <[e-mail]>
2002-07-10  Simon Sudler <[e-mail]>

	* src/ks5000_ether.c: Fix problems with interrupt names (spelling).

2002-06-14  Gary Thomas  <[e-mail]>

	* src/ks5000_ether.c: 
	Need to include <pkgconf/io_eth_drivers.h> for proper configuration
	of stand-alone (polled) vs. system (interrupt driven) mode.

2002-05-30  Jonathan Larmour  <[e-mail]>

	* src/ks5000_ether.c (ks32c5000_eth_send): Conditionalize on
	CYGPKG_KERNEL for presence of thread delay function.
	(ks32c5000_eth_init): No need conditionalizing unmask on CYGPKG_NET.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================