⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 auth.c

📁 eCos/RedBoot for勤研ARM AnywhereII(4510) 含全部源代码
💻 C
📖 第 1 页 / 共 2 页
字号:
//==========================================================================
//
//      src/auth.c
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Portions created by Nick Garnett are
// Copyright (C) 2003 eCosCentric Ltd.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//####BSDCOPYRIGHTBEGIN####
//
// -------------------------------------------
//
// Portions of this software may have been derived from OpenBSD, 
// FreeBSD or other sources, and are covered by the appropriate
// copyright disclaimers included herein.
//
// -------------------------------------------
//
//####BSDCOPYRIGHTEND####
//==========================================================================

/*
 * auth.c - PPP authentication and phase control.
 *
 * Copyright (c) 1993 The Australian National University.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms are permitted
 * provided that the above copyright notice and this paragraph are
 * duplicated in all such forms and that any documentation,
 * advertising materials, and other materials related to such
 * distribution and use acknowledge that the software was developed
 * by the Australian National University.  The name of the University
 * may not be used to endorse or promote products derived from this
 * software without specific prior written permission.
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
 * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 *
 * Copyright (c) 1989 Carnegie Mellon University.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms are permitted
 * provided that the above copyright notice and this paragraph are
 * duplicated in all such forms and that any documentation,
 * advertising materials, and other materials related to such
 * distribution and use acknowledge that the software was developed
 * by Carnegie Mellon University.  The name of the
 * University may not be used to endorse or promote products derived
 * from this software without specific prior written permission.
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
 * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 */

#ifndef lint
//static char rcsid[] = "$FreeBSD: src/usr.sbin/pppd/auth.c,v 1.24.2.1 2000/12/11 01:03:37 obrien Exp $";
#endif

#include <stdio.h>
#include <stddef.h>
#include <stdlib.h>
#include <unistd.h>
#include <cyg/ppp/syslog.h>
#ifndef __ECOS
#include <paths.h>
#endif
//#include <pwd.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/socket.h>
//#include <utmp.h>
#include <fcntl.h>
#if defined(_PATH_LASTLOG) && defined(_linux_)
#include <lastlog.h>
#endif

#include <netdb.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <sys/time.h>
//#include <utmp.h>

#ifdef USE_PAM
#include <security/pam_appl.h>
#endif

#ifdef HAS_SHADOW
#include <shadow.h>
#ifndef PW_PPP
#define PW_PPP PW_LOGIN
#endif
#endif

#include "cyg/ppp/pppd.h"
#include "cyg/ppp/fsm.h"
#include "cyg/ppp/lcp.h"
#include "cyg/ppp/ipcp.h"
#include "cyg/ppp/upap.h"
#include "cyg/ppp/chap.h"
#ifdef CBCP_SUPPORT
#include "cyg/ppp/cbcp.h"
#endif
//#include "cyg/ppp/pathnames.h"

/* Used for storing a sequence of words.  Usually malloced. */
struct wordlist {
    struct wordlist	*next;
    char		word[1];
};

/* Bits in scan_authfile return value */
#define NONWILD_SERVER	1
#define NONWILD_CLIENT	2

#define ISWILD(word)	(word[0] == '*' && word[1] == 0)

#define FALSE	0
#define TRUE	1

/* The name by which the peer authenticated itself to us. */
char peer_authname[MAXNAMELEN];

/* Records which authentication operations haven't completed yet. */
static int auth_pending[NUM_PPP];

/* Set if we have successfully called plogin() */
//static int logged_in;

/* Set if not wild or blank */
//static int non_wildclient;

/* Set if we have run the /etc/ppp/auth-up script. */
//static int did_authup;

/* List of addresses which the peer may use. */
static struct wordlist *addresses[NUM_PPP];

/* Number of network protocols which we have opened. */
static int num_np_open;

/* Number of network protocols which have come up. */
static int num_np_up;

/* Set if we got the contents of passwd[] from the pap-secrets file. */
static int passwd_from_file;

/* Bits in auth_pending[] */
#define PAP_WITHPEER	1
#define PAP_PEER	2
#define CHAP_WITHPEER	4
#define CHAP_PEER	8

extern char *crypt __P((const char *, const char *));

/* Prototypes for procedures local to this file. */

static void network_phase __P((int));
static void check_idle __P((void *));
static void connect_time_expired __P((void *));
static int  null_login __P((int));
static int  get_pap_passwd __P((char *));
static int  have_pap_secret __P((void));
static int  have_chap_secret __P((char *, char *, u_int32_t));
static int  ip_addr_check __P((u_int32_t, struct wordlist *));

static void auth_set_ip_addr __P((int));

/*
 * An Open on LCP has requested a change from Dead to Establish phase.
 * Do what's necessary to bring the physical layer up.
 */
void
link_required(unit)
    int unit;
{
}

/*
 * LCP has terminated the link; go to the Dead phase and take the
 * physical layer down.
 */
void
link_terminated(unit)
    int unit;
{
    extern	time_t	etime, stime;
    extern	int	minutes;

db_printf("%s()\n",__PRETTY_FUNCTION__);    
    if (phase == PHASE_DEAD)
	return;
    phase = PHASE_DEAD;
    etime = time((time_t *) NULL);
    minutes = (etime-stime)/60;
    syslog(LOG_NOTICE, "Connection terminated, connected for %d minutes\n",
	minutes > 1 ? minutes : 1);
}

/*
 * LCP has gone down; it will either die or try to re-establish.
 */
void
link_down(unit)
    int unit;
{
    int i;
    struct protent *protp;

db_printf("%s()\n",__PRETTY_FUNCTION__);
    for (i = 0; (protp = protocols[i]) != NULL; ++i) {
	if (!protp->enabled_flag)
	    continue;
        if (protp->protocol != PPP_LCP && protp->lowerdown != NULL)
	    (*protp->lowerdown)(unit);
        if (protp->protocol < 0xC000 && protp->close != NULL)
	    (*protp->close)(unit, "LCP down");
    }
    num_np_open = 0;
    num_np_up = 0;
    if (phase != PHASE_DEAD)
	phase = PHASE_TERMINATE;
}

/*
 * The link is established.
 * Proceed to the Dead, Authenticate or Network phase as appropriate.
 */
void
link_established(unit)
    int unit;
{
    int auth;
    lcp_options *wo = &lcp_wantoptions[unit];
    lcp_options *go = &lcp_gotoptions[unit];
    lcp_options *ho = &lcp_hisoptions[unit];
    int i;
    struct protent *protp;

    /*
     * Tell higher-level protocols that LCP is up.
     */
    for (i = 0; (protp = protocols[i]) != NULL; ++i)
        if (protp->protocol != PPP_LCP && protp->enabled_flag
	    && protp->lowerup != NULL)
	    (*protp->lowerup)(unit);

    if (auth_required && !(go->neg_chap || go->neg_upap)) {
	/*
	 * We wanted the peer to authenticate itself, and it refused:
	 * treat it as though it authenticated with PAP using a username
	 * of "" and a password of "".  If that's not OK, boot it out.
	 */
	if (!wo->neg_upap || !null_login(unit)) {
	    syslog(LOG_WARNING, "peer refused to authenticate");
	    lcp_close(unit, "peer refused to authenticate");
	    return;
	}
    }

    phase = PHASE_AUTHENTICATE;
    auth = 0;
    if (go->neg_chap) {
	ChapAuthPeer(unit, our_name, go->chap_mdtype);
	auth |= CHAP_PEER;
    } else if (go->neg_upap) {
	upap_authpeer(unit);
	auth |= PAP_PEER;
    }
    if (ho->neg_chap) {
	ChapAuthWithPeer(unit, user, ho->chap_mdtype);
	auth |= CHAP_WITHPEER;
    } else if (ho->neg_upap) {
	if (passwd[0] == 0) {
	    passwd_from_file = 1;
	    if (!get_pap_passwd(passwd))
		syslog(LOG_ERR, "No secret found for PAP login");
	}
	upap_authwithpeer(unit, user, passwd);
	auth |= PAP_WITHPEER;
    }
    auth_pending[unit] = auth;

    if (!auth)
	network_phase(unit);
}

/*
 * Proceed to the network phase.
 */
static void
network_phase(unit)
    int unit;
{
    int i;
    struct protent *protp;
    
#ifdef CBCP_SUPPORT
    /*
     * If we negotiated callback, do it now.
     */
    if (go->neg_cbcp) {
	phase = PHASE_CALLBACK;
	(*cbcp_protent.open)(unit);
	return;
    }
#endif

    phase = PHASE_NETWORK;
    for (i = 0; (protp = protocols[i]) != NULL; ++i)
        if (protp->protocol < 0xC000 && protp->enabled_flag
	    && protp->open != NULL) {
	    (*protp->open)(unit);
	    if (protp->protocol != PPP_CCP)
		++num_np_open;
	}

    if (num_np_open == 0)
	/* nothing to do */
	lcp_close(0, "No network protocols running");
}

/*
 * The peer has failed to authenticate himself using `protocol'.
 */
void
auth_peer_fail(unit, protocol)
    int unit, protocol;
{
    /*
     * Authentication failure: take the link down
     */
    lcp_close(unit, "Authentication failed");
}

/*
 * The peer has been successfully authenticated using `protocol'.
 */
void
auth_peer_success(unit, protocol, name, namelen)
    int unit, protocol;
    char *name;
    int namelen;
{
    int bit;

    switch (protocol) {
    case PPP_CHAP:
	bit = CHAP_PEER;
	break;
    case PPP_PAP:
	bit = PAP_PEER;
	break;
    default:
	syslog(LOG_WARNING, "auth_peer_success: unknown protocol %x",
	       protocol);
	return;
    }

    /*
     * Save the authenticated name of the peer for later.
     */
    if (namelen > sizeof(peer_authname) - 1)
	namelen = sizeof(peer_authname) - 1;
    BCOPY(name, peer_authname, namelen);
    peer_authname[namelen] = 0;

    /*
     * If we have overridden addresses based on auth info
     * then set that information now before continuing.
     */
    auth_set_ip_addr(unit);

    /*
     * If there is no more authentication still to be done,
     * proceed to the network (or callback) phase.
     */
    if ((auth_pending[unit] &= ~bit) == 0)
        network_phase(unit);
}

/*
 * We have failed to authenticate ourselves to the peer using `protocol'.
 */
void
auth_withpeer_fail(unit, protocol)
    int unit, protocol;
{
    if (passwd_from_file)
	BZERO(passwd, MAXSECRETLEN);
    /*
     * We've failed to authenticate ourselves to our peer.
     * He'll probably take the link down, and there's not much
     * we can do except wait for that.
     */
}

/*
 * We have successfully authenticated ourselves with the peer using `protocol'.
 */
void
auth_withpeer_success(unit, protocol)
    int unit, protocol;
{
    int bit;

    switch (protocol) {
    case PPP_CHAP:
	bit = CHAP_WITHPEER;
	break;
    case PPP_PAP:
	if (passwd_from_file)
	    BZERO(passwd, MAXSECRETLEN);
	bit = PAP_WITHPEER;
	break;
    default:
	syslog(LOG_WARNING, "auth_peer_success: unknown protocol %x",
	       protocol);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -