zlib.c

eCos/RedBoot for勤研ARM AnywhereII(4510) 含全部源代码

             && --chain_length != 0);

    if ((uInt)best_len <= s->lookahead) return best_len;
    return s->lookahead;
}
#endif /* ASMV */

#ifdef DEBUG_ZLIB
/* ===========================================================================
 * Check that the match at match_start is indeed a match.
 */
local void check_match(s, start, match, length)
    deflate_state *s;
    IPos start, match;
    int length;
{
    /* check that the match is indeed a match */
    if (zmemcmp((charf *)s->window + match,
                (charf *)s->window + start, length) != EQUAL) {
        fprintf(stderr, " start %u, match %u, length %d\n",
		start, match, length);
        do {
	    fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
	} while (--length != 0);
        z_error("invalid match");
    }
    if (z_verbose > 1) {
        fprintf(stderr,"\\[%d,%d]", start-match, length);
        do { putc(s->window[start++], stderr); } while (--length != 0);
    }
}
#else
#  define check_match(s, start, match, length)
#endif

/* ===========================================================================
 * Fill the window when the lookahead becomes insufficient.
 * Updates strstart and lookahead.
 *
 * IN assertion: lookahead < MIN_LOOKAHEAD
 * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
 *    At least one byte has been read, or avail_in == 0; reads are
 *    performed for at least two bytes (required for the zip translate_eol
 *    option -- not supported here).
 */
local void fill_window(s)
    deflate_state *s;
{
    register unsigned n, m;
    register Posf *p;
    unsigned more;    /* Amount of free space at the end of the window. */
    uInt wsize = s->w_size;

    do {
        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);

        /* Deal with !@#$% 64K limit: */
        if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
            more = wsize;

        } else if (more == (unsigned)(-1)) {
            /* Very unlikely, but possible on 16 bit machine if strstart == 0
             * and lookahead == 1 (input done one byte at time)
             */
            more--;

        /* If the window is almost full and there is insufficient lookahead,
         * move the upper half to the lower one to make room in the upper half.
         */
        } else if (s->strstart >= wsize+MAX_DIST(s)) {

            zmemcpy((charf *)s->window, (charf *)s->window+wsize,
                   (unsigned)wsize);
            s->match_start -= wsize;
            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
            s->block_start -= (long) wsize;

            /* Slide the hash table (could be avoided with 32 bit values
               at the expense of memory usage). We slide even when level == 0
               to keep the hash table consistent if we switch back to level > 0
               later. (Using level 0 permanently is not an optimal usage of
               zlib, so we don't care about this pathological case.)
             */
            n = s->hash_size;
            p = &s->head[n];
            do {
                m = *--p;
                *p = (Pos)(m >= wsize ? m-wsize : NIL);
            } while (--n);

            n = wsize;
            p = &s->prev[n];
            do {
                m = *--p;
                *p = (Pos)(m >= wsize ? m-wsize : NIL);
                /* If n is not on any hash chain, prev[n] is garbage but
                 * its value will never be used.
                 */
            } while (--n);
            more += wsize;
        }
        if (s->strm->avail_in == 0) return;

        /* If there was no sliding:
         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
         *    more == window_size - lookahead - strstart
         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
         * => more >= window_size - 2*WSIZE + 2
         * In the BIG_MEM or MMAP case (not yet supported),
         *   window_size == input_size + MIN_LOOKAHEAD  &&
         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
         * Otherwise, window_size == 2*WSIZE so more >= 2.
         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
         */
        Assert(more >= 2, "more < 2");

        n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
                     more);
        s->lookahead += n;

        /* Initialize the hash value now that we have some input: */
        if (s->lookahead >= MIN_MATCH) {
            s->ins_h = s->window[s->strstart];
            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
#if MIN_MATCH != 3
            Call UPDATE_HASH() MIN_MATCH-3 more times
#endif
        }
        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
         * but this is not important since only literal bytes will be emitted.
         */

    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
}

/* ===========================================================================
 * Flush the current block, with given end-of-file flag.
 * IN assertion: strstart is set to the end of the current match.
 */
#define FLUSH_BLOCK_ONLY(s, eof) { \
   _tr_flush_block(s, (s->block_start >= 0L ? \
                   (charf *)&s->window[(unsigned)s->block_start] : \
                   (charf *)Z_NULL), \
		(ulg)((long)s->strstart - s->block_start), \
		(eof)); \
   s->block_start = s->strstart; \
   flush_pending(s->strm); \
   Tracev((stderr,"[FLUSH]")); \
}

/* Same but force premature exit if necessary. */
#define FLUSH_BLOCK(s, eof) { \
   FLUSH_BLOCK_ONLY(s, eof); \
   if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
}

/* ===========================================================================
 * Copy without compression as much as possible from the input stream, return
 * the current block state.
 * This function does not insert new strings in the dictionary since
 * uncompressible data is probably not useful. This function is used
 * only for the level=0 compression option.
 * NOTE: this function should be optimized to avoid extra copying from
 * window to pending_buf.
 */
local block_state deflate_stored(s, flush)
    deflate_state *s;
    int flush;
{
    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
     * to pending_buf_size, and each stored block has a 5 byte header:
     */
    ulg max_block_size = 0xffff;
    ulg max_start;

    if (max_block_size > s->pending_buf_size - 5) {
        max_block_size = s->pending_buf_size - 5;
    }

    /* Copy as much as possible from input to output: */
    for (;;) {
        /* Fill the window as much as possible: */
        if (s->lookahead <= 1) {

            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
		   s->block_start >= (long)s->w_size, "slide too late");

            fill_window(s);
            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;

            if (s->lookahead == 0) break; /* flush the current block */
        }
	Assert(s->block_start >= 0L, "block gone");

	s->strstart += s->lookahead;
	s->lookahead = 0;

	/* Emit a stored block if pending_buf will be full: */
 	max_start = s->block_start + max_block_size;
        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
	    /* strstart == 0 is possible when wraparound on 16-bit machine */
	    s->lookahead = (uInt)(s->strstart - max_start);
	    s->strstart = (uInt)max_start;
            FLUSH_BLOCK(s, 0);
	}
	/* Flush if we may have to slide, otherwise block_start may become
         * negative and the data will be gone:
         */
        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
            FLUSH_BLOCK(s, 0);
	}
    }
    FLUSH_BLOCK(s, flush == Z_FINISH);
    return flush == Z_FINISH ? finish_done : block_done;
}

/* ===========================================================================
 * Compress as much as possible from the input stream, return the current
 * block state.
 * This function does not perform lazy evaluation of matches and inserts
 * new strings in the dictionary only for unmatched strings or for short
 * matches. It is used only for the fast compression options.
 */
local block_state deflate_fast(s, flush)
    deflate_state *s;
    int flush;
{
    IPos hash_head = NIL; /* head of the hash chain */
    int bflush;           /* set if current block must be flushed */

    for (;;) {
        /* Make sure that we always have enough lookahead, except
         * at the end of the input file. We need MAX_MATCH bytes
         * for the next match, plus MIN_MATCH bytes to insert the
         * string following the next match.
         */
        if (s->lookahead < MIN_LOOKAHEAD) {
            fill_window(s);
            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
	        return need_more;
	    }
            if (s->lookahead == 0) break; /* flush the current block */
        }

        /* Insert the string window[strstart .. strstart+2] in the
         * dictionary, and set hash_head to the head of the hash chain:
         */
        if (s->lookahead >= MIN_MATCH) {
            INSERT_STRING(s, s->strstart, hash_head);
        }

        /* Find the longest match, discarding those <= prev_length.
         * At this point we have always match_length < MIN_MATCH
         */
        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
            /* To simplify the code, we prevent matches with the string
             * of window index 0 (in particular we have to avoid a match
             * of the string with itself at the start of the input file).
             */
            if (s->strategy != Z_HUFFMAN_ONLY) {
                s->match_length = longest_match (s, hash_head);
            }
            /* longest_match() sets match_start */
        }
        if (s->match_length >= MIN_MATCH) {
            check_match(s, s->strstart, s->match_start, s->match_length);

            bflush = _tr_tally(s, s->strstart - s->match_start,
                               s->match_length - MIN_MATCH);

            s->lookahead -= s->match_length;

            /* Insert new strings in the hash table only if the match length
             * is not too large. This saves time but degrades compression.
             */
            if (s->match_length <= s->max_insert_length &&
                s->lookahead >= MIN_MATCH) {
                s->match_length--; /* string at strstart already in hash table */
                do {
                    s->strstart++;
                    INSERT_STRING(s, s->strstart, hash_head);
                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
                     * always MIN_MATCH bytes ahead.
                     */
                } while (--s->match_length != 0);
                s->strstart++; 
            } else {
                s->strstart += s->match_length;
                s->match_length = 0;
                s->ins_h = s->window[s->strstart];
                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
#if MIN_MATCH != 3
                Call UPDATE_HASH() MIN_MATCH-3 more times
#endif
                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
                 * matter since it will be recomputed at next deflate call.
                 */
            }
        } else {
            /* No match, output a literal byte */
            Tracevv((stderr,"%c", s->window[s->strstart]));
            bflush = _tr_tally (s, 0, s->window[s->strstart]);
            s->lookahead--;
            s->strstart++; 
        }
        if (bflush) FLUSH_BLOCK(s, 0);
    }
    FLUSH_BLOCK(s, flush == Z_FINISH);
    return flush == Z_FINISH ? finish_done : block_done;
}

/* ===========================================================================
 * Same as above, but achieves better compression. We use a lazy
 * evaluation for matches: a match is finally adopted only if there is
 * no better match at the next window position.
 */
local block_state deflate_slow(s, flush)
    deflate_state *s;
    int flush;
{
    IPos hash_head = NIL;    /* head of hash chain */
    int bflush;              /* set if current block must be flushed */

    /* Process the input block. */
    for (;;) {
        /* Make sure that we always have enough lookahead, except
         * at the end of the input file. We need MAX_MATCH bytes
         * for the next match, plus MIN_MATCH bytes to insert the
         * string following the next match.
         */
        if (s->lookahead < MIN_LOOKAHEAD) {
            fill_window(s);
            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
	        return need_more;
	    }
            if (s->lookahead == 0) break; /* flush the current block */
        }

        /* Insert the string window[strstart .. strstart+2] in the
         * dictionary, and set hash_head to the head of the hash chain:
         */
        if (s->lookahead >= MIN_MATCH) {
            INSERT_STRING(s, s->strstart, hash_head);
        }

        /* Find the longest match, discarding those <= prev_length.
         */
        s->prev_length = s->match_length, s->prev_match = s->match_start;
        s->match_length = MIN_MATCH-1;

        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
            s->strstart - hash_head <= MAX_DIST(s)) {
            /* To simplify the code, we prevent matches with the string
             * of window index 0 (in particular we have to avoid a match
             * of the string with itself at the start of the input file).
             */
            if (s->strategy != Z_HUFFMAN_ONLY) {
                s->match_length = longest_match (s, hash_head);
            }
            /* longest_match() sets match_start */

            if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
                 (s->match_length == MIN_MATCH &&
                  s->strstart - s->match_s