redboot.cdl

eCos/RedBoot for勤研ARM AnywhereII(4510) 含全部源代码

            description   "
              This option controls whether or not RedBoot will make sure that
              memory being used by the \"load\" command is in fact in user RAM.
              Leaving the option enabled makes for a safer environment, but this
              check may not be valid on all platforms, thus the ability to
              disable it.  ** Disable this only with great care **"
        }
    
        cdl_component CYGPKG_REDBOOT_FLASH {
            display       "Allow RedBoot to support FLASH programming"
            flavor        bool
            default_value 1
            active_if     CYGHWR_IO_FLASH_DEVICE
            description   "
              If this option is enabled then RedBoot will provide commands
              to manage images in FLASH memory.  These images can be loaded
              into memory for execution or executed in place."
            compile -library=libextras.a flash.c
    
            cdl_option CYGOPT_REDBOOT_FIS {
                display         "RedBoot Flash Image System support"
                default_value   1
                doc             ref/flash-image-system.html
                description "
                    This option enables the Flash Image System commands
                    and support within RedBoot.  If disabled, simple Flash
                    access commands such as \"fis write\" will still exist.
                    This option would be disabled for targets that need simple
                    FLASH manipulation, but do not have the need or space for
                    complete image management."
            }

            cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
                display        "Max number of chunks of free space to manage"
                flavor         booldata
                default_value  32
                description    "
                  If this option is defined then \"fis free\" will rely on the
                  FIS directory to determine what space is free within the FLASH.
                  This option controls the maximum number of free segment which
                  can be handled (typically this number is small).  If this option
                  is not enabled, the the archaic behaviour of actually scanning
                  the FLASH for erased sectors (unreliable) will be used to 
                  determine what's free and what's not."
            }
    
            cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
                display       "Flash Image System default directory contents"
                active_if     CYGOPT_REDBOOT_FIS
                calculated    1
    
                cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
                    display         "Flash block containing the Directory"
                    flavor          data
                    default_value   (-1)
                    description "
                      Which block of flash should hold the directory 
                      information. Positive numbers are absolute block numbers. 
                      Negative block numbers count backwards from the last block.
                      eg 2 means block 2, -2 means the last but one block."
                }
    
                cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
                    display         "Pseudo-file to describe reserved area"
                    active_if       { 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE }
                    default_value   1
                    description "
                        If an area of FLASH is reserved, it is informative to
                        have a fis entry describing it.  This option controls
                        creation of such an entry by default in the fis init
                        command."
                }
    
                cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
                    display         "File to describe RedBoot boot image"
                    default_value   1
                    description "
                        Normally a ROM-startup RedBoot image is first in the
                        FLASH, and the system boots using that image.  This
                        option controls creation of an entry describing it in
                        the fis init command.  It might be disabled if a
                        platform has an immutable boot image of its own, where
                        we use a POST-startup RedBoot instead, which performs
                        less board initialization."
                }
    
                cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
                    display         "File to describe RedBoot POST-compatible image"
                    default_value   !CYGOPT_REDBOOT_FIS_REDBOOT
                    description "
                        This option controls creation of an entry describing a
                        POST-startup RedBoot image in the fis init command.
                        Not all platforms support POST-startup.  A platform
                        might have both for testing purposes, where the
                        eventual user would substitute their own POST code for
                        the initial ROM-startup RedBoot, and then jump to the
                        POST-compatible RedBoot immediately following."
                    cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
                        display    "Offset of POST image from FLASH start"
                        flavor     booldata
                        default_value 0
                        requires   { CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= \
                                     CYGBLD_REDBOOT_FLASH_BOOT_OFFSET }
                        description "
                        This option specifies the offset for a POST image from
                        the start of FLASH.  If unset, then the fis entry
                        describing the POST image will be placed where
                        convenient."
                    }
                }   
    
                cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
                    display         "File to describe RedBoot backup image"
                    default_value   0
                    description "
                        This option controls creation of an entry describing a
                        backup RedBoot image in the fis init command.
                        Conventionally a RAM-startup RedBoot image is kept
                        under this name for use in updating the ROM-based
                        RedBoot that boots the board."
                }
    
                cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
                    display         "Include ARM SIB ID in FIS"
                    default_value   0
                    description "
                      If set, this option will cause the last 5 words of
                      the FIS to include the special ID needed for the
                      flash to be recognized as a reserved area for RedBoot
                      by an ARM BootRom monitor."
                }
    
                cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
                    display         "Size of FIS directory entry"
                    flavor	    	data
                    default_value   256
                    description "
                      The FIS directory is limited to one single flash
                      sector. If your flash has tiny sectors, you may wish
                      to reduce this value in order to get more slots in
                      the FIS directory."
                }
    
                cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
                    display         "Number of FIS directory entries"
                    flavor	    data
                    default_value   8
                    description "
                      The FIS directory normally occupies a single flash
                      sector. Adjusting this value can allow for more than
                      one flash sector to be used, which is useful if your
                      sectors are very small."
                }
    
                cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
                    display       "Minimum image size"
                    flavor        data
                    default_value 0x20000
                    description "
                      This option controls the minimum length of images kept by
                      the FIS.  In particular, it should be large enough to hold
                      the RedBoot primary image itself, as well as be a natural
                      multiple of the FLASH erase block size."
                }
        
                cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
                    display       "Offset from start of FLASH to RedBoot boot image"
                    flavor        data
                    default_value CYGNUM_REDBOOT_FLASH_RESERVED_BASE
                    requires      { CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= \
                                    CYGBLD_REDBOOT_FLASH_BOOT_OFFSET }
                    description "
                      This option controls where the RedBoot boot image is located
                      relative to the start of FLASH."
                }
        
                cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
                    display       "Size of reserved area at start of FLASH"
                    flavor        data
                    default_value 0
                    description "
                      This option reserves an area at the start of FLASH where RedBoot
                      will never interfere; it is expected that this area contains
                      (non-RedBoot-based) POST code or some other boot monitor that
                      executes before RedBoot."
                }
            }
    
            cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
                display       "Keep all RedBoot FLASH data blocks locked."
                flavor        bool
                default_value 1
                active_if     { CYGHWR_IO_FLASH_BLOCK_LOCKING != 0 }
                description "
                  When this option is enabled, RedBoot will keep configuration
                  data and the FIS directory blocks implicitly locked.  While
                  this is somewhat safer, it does add overhead during updates."
            }
    
            cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
                display       "Use CRC checksums on FIS images."
                flavor        bool
                default_value 1
                description "
                  When this option is enabled, RedBoot will use CRC checksums
                  when reading and writing flash images."
            }
    
            cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
                display       "ARM FLASH drivers support SIB flash block structure"
                active_if     CYGPKG_HAL_ARM
                description   "This interface is implemented by a flash driver
                               to indicate that it supports the ARM SIB flash
                               block structure"
            }
    
            cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
                display       "Use ARM SIB flash block structure"
                flavor        bool
                active_if     CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
                default_value 1
                description "
                  This option is used to interpret ARM Flash System information
                  blocks."
            }
        }
    
        cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
            display       "Keep RedBoot configuration data in FLASH"
            flavor        bool
            default_value { CYGPKG_IO_FLASH != 0 }
            compile       fconfig.c
            description "
              When this option is enabled, RedBoot will keep configuration
              data in a separate block of FLASH memory.  This data will
              include such items as the node IP address or startup scripts."

            cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
                display       "Length of configuration data in FLASH"
                flavor        data
                default_value 4096
                description "
                  This option is used to control the amount of memory and FLASH
                  to be used for configuration options (persistent storage)."
            }

            cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
                display       "Style of media used for persistent data storage"
                flavor        data
                legal_values  { "FLASH" "EEPROM" }
                default_value { "FLASH" }
#                requires      { ((CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") && CYGOPT_REDBOOT_FIS) ||
#                                ((CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "EEPROM") && !CYGOPT_REDBOOT_FIS) }
                description "
                  Persistent data storage can either be held in 'norma' FLASH
                  or some other device (represented by the 'EEPROM' choice).
                  The different styles utilize different access methods."
            }

            cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
                display       "Merged config data and FIS directory"
                flavor        bool              
                active_if     { CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH") }
                default_value 1
                description "
                  If this option is set, then the FIS directory and FLASH