mk_romfs.txt

eCos/RedBoot for勤研ARM AnywhereII(4510) 含全部源代码

MK_ROMFS - Make a ROMFS image
=============================

This program creates a ROMFS image that can be read by eCos.

mk_romfs - Create an eCos ROMFS disk image from the files
                      contained under a specified directory

Usage: ../support/mk_romfs [options] <fs_root> <fs_file>
 fs_root    is the directory containing the files to package into the ROMFS image
 fs_file    is the name of the ROMFS image file to create
          Options include:
 -v / -q    increase / decrease verbosity
 -n         do everything EXCEPT creating the output file
 -b         write a big-endian image (default is little endian)
 -l         collapse hard links to a single node

-----------
How to use.
-----------

For example, suppose you wish to access the following directories and files:
	/
	/etc	passwd, group
	/dev
	/mnt
	/tmp	(for a RAMFS)
	/var	(for a RAMFS)

1. Create the required directories and files under a suitable root, eg. under
   ~/rom:
   	$ mkdir ~/rom
	$ cd ~/rom
	$ mkdir etc dev mnt tmp var
	$ cp /etc/passwd /etc/group etc/
		( remembering to edit these files....;-)

2. Make the romfs image in a suitable place, eg /tftpboot for direct upload to
   the RedBoot monitor.
   	$ mk_romfs -v . /tftpboot/romfs.img
	mk_romfs: Verbosity 2 little endian
	Phase 1  - Build file list
	Phase 2  - Calculate space allocation
	Phase 2a -     * Directories
	Phase 2b -     * Regular files
	Phase 2c -     * Executable files
	Phase 3  - Construct ROMFS image file (3 kb)
	Phase 3a -     * Node table
	Phase 3b -     * Data blocks
	/tftpboot/romfs.img completed

3. Connect to your target RedBoot monitor, and load the romfs image. You will
   need to determine a suitable place in RAM to load the image into.
	$ telnet xxx.xxx.xxx.xxx 1000
	Trying xxx.xxx.xxx.xxx...
	Connected to xxx.xxx.xxx.xxx.
	Escape character is '^]'.
	RedBoot> load romfs.img -r -v -b 0x1000000
	Raw file loaded 0x01000000-0x0100093e
	RedBoot>

4. Determine where to load the romfs image in the ROM. See what's there...
	RedBoot> fis list
	Name              FLASH addr   Mem addr    Length    Entry point
	RedBoot           0x50000000   0x50000000  0x020000  0x00000000
	RedBoot[backup]   0x50020000   0x50020000  0x020000  0x00000000
	RedBoot config    0x503C0000   0x503C0000  0x020000  0x00000000
	FIS directory     0x503E0000   0x503E0000  0x020000  0x00000000
	RedBoot> fis free
	  0x50040000 .. 0x503C0000
	RedBoot>
   We can see that a suitable place would be 0x50040000.
   Alternatively, you can let RedBoot determine the address itself...

5. Copy the image from RAM to ROM...
	RedBoot> fis create -b 0x1000000 -l 0x940 RomFs
	... Erase from 0x50040000-0x50040940: .
	... Program from 0x01000000-0x01000940 at 0x50040000: .
	... Erase from 0x503e0000-0x50400000: .
	... Program from 0x01fd0000-0x01ff0000 at 0x503e0000: .
	RedBoot> fis list
	Name              FLASH addr   Mem addr    Length    Entry point
	RedBoot           0x50000000   0x50000000  0x020000  0x00000000
	RedBoot[backup]   0x50020000   0x50020000  0x020000  0x00000000
	RedBoot config    0x503C0000   0x503C0000  0x020000  0x00000000
	FIS directory     0x503E0000   0x503E0000  0x020000  0x00000000
	RomFs             0x50040000   0x01000000  0x000940  0x00000000
	RedBoot>

6. MAKE A NOTE OF THE ADDRESS IN FLASH THAT THE IMAGE IS LOADED AT.
   The ROMFS option 'CYGNUM_FS_ROM_BASE_ADDRESS' needs to be set to this
   value in order to access the filesystem.