⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 nodelist.h

📁 eCos/RedBoot for勤研ARM AnywhereII(4510) 含全部源代码
💻 H
📖 第 1 页 / 共 2 页
字号:
/*
 * JFFS2 -- Journalling Flash File System, Version 2.
 *
 * Copyright (C) 2001-2003 Red Hat, Inc.
 *
 * Created by David Woodhouse <dwmw2@redhat.com>
 *
 * For licensing information, see the file 'LICENCE' in this directory.
 *
 * $Id: nodelist.h,v 1.116 2004/03/08 15:29:09 dwmw2 Exp $
 *
 */

#ifndef __JFFS2_NODELIST_H__
#define __JFFS2_NODELIST_H__

#include <linux/config.h>
#include <linux/fs.h>
#include <linux/types.h>
#include <linux/jffs2.h>
#include <linux/jffs2_fs_sb.h>
#include <linux/jffs2_fs_i.h>

#ifdef __ECOS
#include "os-ecos.h"
#else
#include <linux/mtd/compatmac.h> /* For min/max in older kernels */
#include "os-linux.h"
#endif

#ifndef CONFIG_JFFS2_FS_DEBUG
#define CONFIG_JFFS2_FS_DEBUG 1
#endif

#if CONFIG_JFFS2_FS_DEBUG > 0
#define D1(x) x
#else
#define D1(x)
#endif

#if CONFIG_JFFS2_FS_DEBUG > 1
#define D2(x) x
#else
#define D2(x)
#endif

/*
  This is all we need to keep in-core for each raw node during normal
  operation. As and when we do read_inode on a particular inode, we can
  scan the nodes which are listed for it and build up a proper map of 
  which nodes are currently valid. JFFSv1 always used to keep that whole
  map in core for each inode.
*/
struct jffs2_raw_node_ref
{
	struct jffs2_raw_node_ref *next_in_ino; /* Points to the next raw_node_ref
		for this inode. If this is the last, it points to the inode_cache
		for this inode instead. The inode_cache will have NULL in the first
		word so you know when you've got there :) */
	struct jffs2_raw_node_ref *next_phys;
	uint32_t flash_offset;
	uint32_t __totlen; /* This may die; use ref_totlen(c, jeb, ) below */
};

        /* flash_offset & 3 always has to be zero, because nodes are
	   always aligned at 4 bytes. So we have a couple of extra bits
	   to play with, which indicate the node's status; see below: */ 
#define REF_UNCHECKED	0	/* We haven't yet checked the CRC or built its inode */
#define REF_OBSOLETE	1	/* Obsolete, can be completely ignored */
#define REF_PRISTINE	2	/* Completely clean. GC without looking */
#define REF_NORMAL	3	/* Possibly overlapped. Read the page and write again on GC */
#define ref_flags(ref)		((ref)->flash_offset & 3)
#define ref_offset(ref)		((ref)->flash_offset & ~3)
#define ref_obsolete(ref)	(((ref)->flash_offset & 3) == REF_OBSOLETE)
#define mark_ref_normal(ref)    do { (ref)->flash_offset = ref_offset(ref) | REF_NORMAL; } while(0)

/* 
   Used for keeping track of deletion nodes &c, which can only be marked
   as obsolete when the node which they mark as deleted has actually been 
   removed from the flash.
*/
struct jffs2_raw_node_ref_list {
	struct jffs2_raw_node_ref *rew;
	struct jffs2_raw_node_ref_list *next;
};

/* For each inode in the filesystem, we need to keep a record of
   nlink, because it would be a PITA to scan the whole directory tree
   at read_inode() time to calculate it, and to keep sufficient information
   in the raw_node_ref (basically both parent and child inode number for 
   dirent nodes) would take more space than this does. We also keep
   a pointer to the first physical node which is part of this inode, too.
*/
struct jffs2_inode_cache {
	struct jffs2_full_dirent *scan_dents; /* Used during scan to hold
		temporary lists of dirents, and later must be set to
		NULL to mark the end of the raw_node_ref->next_in_ino
		chain. */
	struct jffs2_inode_cache *next;
	struct jffs2_raw_node_ref *nodes;
	uint32_t ino;
	int nlink;
	int state;
};

/* Inode states for 'state' above. We need the 'GC' state to prevent
   someone from doing a read_inode() while we're moving a 'REF_PRISTINE'
   node without going through all the iget() nonsense */
#define INO_STATE_UNCHECKED	0	/* CRC checks not yet done */
#define INO_STATE_CHECKING	1	/* CRC checks in progress */
#define INO_STATE_PRESENT	2	/* In core */
#define INO_STATE_CHECKEDABSENT	3	/* Checked, cleared again */
#define INO_STATE_GC		4	/* GCing a 'pristine' node */
#define INO_STATE_READING	5	/* In read_inode() */

#define INOCACHE_HASHSIZE 128

struct jffs2_scan_info {
	struct jffs2_full_dirent *dents;
	struct jffs2_tmp_dnode_info *tmpnodes;
	/* Latest i_size info */
	uint32_t version;
	uint32_t isize;
};
/*
  Larger representation of a raw node, kept in-core only when the 
  struct inode for this particular ino is instantiated.
*/

struct jffs2_full_dnode
{
	struct jffs2_raw_node_ref *raw;
	uint32_t ofs; /* Don't really need this, but optimisation */
	uint32_t size;
	uint32_t frags; /* Number of fragments which currently refer
			to this node. When this reaches zero, 
			the node is obsolete.
		     */
};

/* 
   Even larger representation of a raw node, kept in-core only while
   we're actually building up the original map of which nodes go where,
   in read_inode()
*/
struct jffs2_tmp_dnode_info
{
	struct jffs2_tmp_dnode_info *next;
	struct jffs2_full_dnode *fn;
	uint32_t version;
};       

struct jffs2_full_dirent
{
	struct jffs2_raw_node_ref *raw;
	struct jffs2_full_dirent *next;
	uint32_t version;
	uint32_t ino; /* == zero for unlink */
	unsigned int nhash;
	unsigned char type;
	unsigned char name[0];
};
/*
  Fragments - used to build a map of which raw node to obtain 
  data from for each part of the ino
*/
struct jffs2_node_frag
{
	struct rb_node rb;
	struct jffs2_full_dnode *node; /* NULL for holes */
	uint32_t size;
	uint32_t ofs; /* Don't really need this, but optimisation */
};

struct jffs2_eraseblock
{
	struct list_head list;
	int bad_count;
	uint32_t offset;		/* of this block in the MTD */

	uint32_t unchecked_size;
	uint32_t used_size;
	uint32_t dirty_size;
	uint32_t wasted_size;
	uint32_t free_size;	/* Note that sector_size - free_size
				   is the address of the first free space */
	struct jffs2_raw_node_ref *first_node;
	struct jffs2_raw_node_ref *last_node;

	struct jffs2_raw_node_ref *gc_node;	/* Next node to be garbage collected */

	/* For deletia. When a dirent node in this eraseblock is
	   deleted by a node elsewhere, that other node can only 
	   be marked as obsolete when this block is actually erased.
	   So we keep a list of the nodes to mark as obsolete when
	   the erase is completed.
	*/
	// MAYBE	struct jffs2_raw_node_ref_list *deletia;
};

#define ACCT_SANITY_CHECK(c, jeb) do { \		struct jffs2_eraseblock *___j = jeb; \		if ((___j) && ___j->used_size + ___j->dirty_size + ___j->free_size + ___j->wasted_size + ___j->unchecked_size != c->sector_size) { \		printk(KERN_NOTICE "Eeep. Space accounting for block at 0x%08x is screwed\n", ___j->offset); \		printk(KERN_NOTICE "free 0x%08x + dirty 0x%08x + used %08x + wasted %08x + unchecked %08x != total %08x\n", \		___j->free_size, ___j->dirty_size, ___j->used_size, ___j->wasted_size, ___j->unchecked_size, c->sector_size); \		BUG(); \	} \	if (c->used_size + c->dirty_size + c->free_size + c->erasing_size + c->bad_size + c->wasted_size + c->unchecked_size != c->flash_size) { \		printk(KERN_NOTICE "Eeep. Space accounting superblock info is screwed\n"); \		printk(KERN_NOTICE "free 0x%08x + dirty 0x%08x + used %08x + erasing %08x + bad %08x + wasted %08x + unchecked %08x != total %08x\n", \		c->free_size, c->dirty_size, c->used_size, c->erasing_size, c->bad_size, c->wasted_size, c->unchecked_size, c->flash_size); \		BUG(); \	} \} while(0)

static inline void paranoia_failed_dump(struct jffs2_eraseblock *jeb)
{
	struct jffs2_raw_node_ref *ref;
	int i=0;

	printk(KERN_NOTICE);
	for (ref = jeb->first_node; ref; ref = ref->next_phys) {
		printk("%08x->", ref_offset(ref));
		if (++i == 8) {
			i = 0;
			printk("\n" KERN_NOTICE);
		}
	}
	printk("\n");
}


#define ACCT_PARANOIA_CHECK(jeb) do { \		uint32_t my_used_size = 0; \		uint32_t my_unchecked_size = 0; \		struct jffs2_raw_node_ref *ref2 = jeb->first_node; \		while (ref2) { \

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -