makefile.in

Simple DirectMedia Layer - Simple DirectMedia Layer 是一个跨平台的多媒体库设计用来提供快速图形framebuffer和音频驱动。应用MPEG为软件

# Makefile.in generated automatically by automake 1.4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = ../..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
ARCH = @ARCH@
ARTSCCONFIG = @ARTSCCONFIG@
AS = @AS@
ASFLAGS = @ASFLAGS@
AUDIO_DRIVERS = @AUDIO_DRIVERS@
AUDIO_SUBDIRS = @AUDIO_SUBDIRS@
CC = @CC@
CCAS = @CCAS@
CCASFLAGS = @CCASFLAGS@
CDROM_DRIVERS = @CDROM_DRIVERS@
CDROM_SUBDIRS = @CDROM_SUBDIRS@
CXX = @CXX@
DIRECTFB_CFLAGS = @DIRECTFB_CFLAGS@
DIRECTFB_LIBS = @DIRECTFB_LIBS@
DLLTOOL = @DLLTOOL@
ESD_CFLAGS = @ESD_CFLAGS@
ESD_CONFIG = @ESD_CONFIG@
ESD_LIBS = @ESD_LIBS@
JOYSTICK_DRIVERS = @JOYSTICK_DRIVERS@
JOYSTICK_SUBDIRS = @JOYSTICK_SUBDIRS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LT_AGE = @LT_AGE@
LT_CURRENT = @LT_CURRENT@
LT_RELEASE = @LT_RELEASE@
LT_REVISION = @LT_REVISION@
MAKEINFO = @MAKEINFO@
NASM = @NASM@
NASMFLAGS = @NASMFLAGS@
OBJC = @OBJC@
OBJCDEPMODE = @OBJCDEPMODE@
OBJCFLAGS = @OBJCFLAGS@
OBJDUMP = @OBJDUMP@
PACKAGE = @PACKAGE@
PKG_CONFIG = @PKG_CONFIG@
PTH_CONFIG = @PTH_CONFIG@
RANLIB = @RANLIB@
SDL_BINARY_AGE = @SDL_BINARY_AGE@
SDL_CFLAGS = @SDL_CFLAGS@
SDL_EXTRADIRS = @SDL_EXTRADIRS@
SDL_EXTRALIBS = @SDL_EXTRALIBS@
SDL_INTERFACE_AGE = @SDL_INTERFACE_AGE@
SDL_LIBS = @SDL_LIBS@
SDL_MAJOR_VERSION = @SDL_MAJOR_VERSION@
SDL_MICRO_VERSION = @SDL_MICRO_VERSION@
SDL_MINOR_VERSION = @SDL_MINOR_VERSION@
SDL_RLD_FLAGS = @SDL_RLD_FLAGS@
SDL_VERSION = @SDL_VERSION@
SHARED_SYSTEM_LIBS = @SHARED_SYSTEM_LIBS@
STATIC_SYSTEM_LIBS = @STATIC_SYSTEM_LIBS@
SYSTEM_LIBS = @SYSTEM_LIBS@
VERSION = @VERSION@
VIDEO_DRIVERS = @VIDEO_DRIVERS@
VIDEO_SUBDIRS = @VIDEO_SUBDIRS@
arts_lib = @arts_lib@
esd_lib = @esd_lib@

noinst_LTLIBRARIES = libaudio.la

# Define which subdirectories need to be built
SUBDIRS = @AUDIO_SUBDIRS@
DIST_SUBDIRS = alsa arts baudio dma dmedia dsp esd macrom nas nto openbsd 	paudio sun ums windib windx5 disk mint dc


DRIVERS = @AUDIO_DRIVERS@

# Include the architecture-independent sources
COMMON_SRCS =  	SDL_audio.c			SDL_audio_c.h			SDL_audiocvt.c			SDL_audiodev.c			SDL_audiodev_c.h		SDL_audiomem.c			SDL_audiomem.h			SDL_mixer.c			SDL_sysaudio.h			SDL_wave.c			SDL_wave.h


libaudio_la_SOURCES = $(COMMON_SRCS)
libaudio_la_LIBADD = $(DRIVERS)
libaudio_la_DEPENDENCIES = $(DRIVERS)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES = 
LTLIBRARIES =  $(noinst_LTLIBRARIES)


DEFS = @DEFS@ -I. -I$(srcdir) 
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
X_CFLAGS = @X_CFLAGS@
X_LIBS = @X_LIBS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
libaudio_la_LDFLAGS = 
libaudio_la_OBJECTS =  SDL_audio.lo SDL_audiocvt.lo SDL_audiodev.lo \
SDL_audiomem.lo SDL_mixer.lo SDL_wave.lo
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
DIST_COMMON =  Makefile.am Makefile.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
SOURCES = $(libaudio_la_SOURCES)
OBJECTS = $(libaudio_la_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .lo .o .s
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --foreign --include-deps src/audio/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status


mostlyclean-noinstLTLIBRARIES:

clean-noinstLTLIBRARIES:
	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)

distclean-noinstLTLIBRARIES:

maintainer-clean-noinstLTLIBRARIES:

.c.o:
	$(COMPILE) -c $<

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

.c.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.s.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.S.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

libaudio.la: $(libaudio_la_OBJECTS) $(libaudio_la_DEPENDENCIES)
	$(LINK)  $(libaudio_la_LDFLAGS) $(libaudio_la_OBJECTS) $(libaudio_la_LIBADD) $(LIBS)

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = src/audio

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(DIST_SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive

install-data-am:
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile $(LTLIBRARIES)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-noinstLTLIBRARIES mostlyclean-compile \
		mostlyclean-libtool mostlyclean-tags \
		mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-noinstLTLIBRARIES clean-compile clean-libtool \
		clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-noinstLTLIBRARIES distclean-compile \
		distclean-libtool distclean-tags distclean-generic \
		clean-am
	-rm -f libtool

distclean: distclean-recursive

maintainer-clean-am:  maintainer-clean-noinstLTLIBRARIES \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive

.PHONY: mostlyclean-noinstLTLIBRARIES distclean-noinstLTLIBRARIES \
clean-noinstLTLIBRARIES maintainer-clean-noinstLTLIBRARIES \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
clean-libtool maintainer-clean-libtool install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: