mc146818rtc.h

GNU Hurd 源代码

/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
 * Copyright Torsten Duwe <[e-mail]> 1993
 * derived from Data Sheet, Copyright Motorola 1984 (!).
 * It was written to be part of the Linux operating system.
 */
/* permission is hereby granted to copy, modify and redistribute this code
 * in terms of the GNU Library General Public License, Version 2 or later,
 * at your option.
 */

#ifndef _MC146818RTC_H
#define _MC146818RTC_H
#include <asm/io.h>

#ifndef RTC_PORT
#define RTC_PORT(x)	(0x70 + (x))
#define RTC_ALWAYS_BCD	1
#endif

#define CMOS_READ(addr) ({ \
outb_p((addr),RTC_PORT(0)); \
inb_p(RTC_PORT(1)); \
})
#define CMOS_WRITE(val, addr) ({ \
outb_p((addr),RTC_PORT(0)); \
outb_p((val),RTC_PORT(1)); \
})

/**********************************************************************
 * register summary
 **********************************************************************/
#define RTC_SECONDS		0
#define RTC_SECONDS_ALARM	1
#define RTC_MINUTES		2
#define RTC_MINUTES_ALARM	3
#define RTC_HOURS		4
#define RTC_HOURS_ALARM		5
/* RTC_*_alarm is always true if 2 MSBs are set */
# define RTC_ALARM_DONT_CARE 	0xC0

#define RTC_DAY_OF_WEEK		6
#define RTC_DAY_OF_MONTH	7
#define RTC_MONTH		8
#define RTC_YEAR		9

/* control registers - Moto names
 */
#define RTC_REG_A		10
#define RTC_REG_B		11
#define RTC_REG_C		12
#define RTC_REG_D		13

/**********************************************************************
 * register details
 **********************************************************************/
#define RTC_FREQ_SELECT	RTC_REG_A

/* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
 * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
 * totalling to a max high interval of 2.228 ms.
 */
# define RTC_UIP		0x80
# define RTC_DIV_CTL		0x70
   /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
#  define RTC_REF_CLCK_4MHZ	0x00
#  define RTC_REF_CLCK_1MHZ	0x10
#  define RTC_REF_CLCK_32KHZ	0x20
   /* 2 values for divider stage reset, others for "testing purposes only" */
#  define RTC_DIV_RESET1	0x60
#  define RTC_DIV_RESET2	0x70
  /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
# define RTC_RATE_SELECT 	0x0F

/**********************************************************************/
#define RTC_CONTROL	RTC_REG_B
# define RTC_SET 0x80		/* disable updates for clock setting */
# define RTC_PIE 0x40		/* periodic interrupt enable */
# define RTC_AIE 0x20		/* alarm interrupt enable */
# define RTC_UIE 0x10		/* update-finished interrupt enable */
# define RTC_SQWE 0x08		/* enable square-wave output */
# define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
# define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
# define RTC_DST_EN 0x01	/* auto switch DST - works f. USA only */

/**********************************************************************/
#define RTC_INTR_FLAGS	RTC_REG_C
/* caution - cleared by read */
# define RTC_IRQF 0x80		/* any of the following 3 is active */
# define RTC_PF 0x40
# define RTC_AF 0x20
# define RTC_UF 0x10

/**********************************************************************/
#define RTC_VALID	RTC_REG_D
# define RTC_VRT 0x80		/* valid RAM and time */
/**********************************************************************/

/* example: !(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) 
 * determines if the following two #defines are needed
 */
#ifndef BCD_TO_BIN
#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
#endif

#ifndef BIN_TO_BCD
#define BIN_TO_BCD(val) ((val)=(((val)/10)<<4) + (val)%10)
#endif

/*
 * The struct used to pass data via the following ioctl. Similar to the
 * struct tm in <time.h>, but it needs to be here so that the kernel 
 * source is self contained, allowing cross-compiles, etc. etc.
 */

struct rtc_time {
	int tm_sec;
	int tm_min;
	int tm_hour;
	int tm_mday;
	int tm_mon;
	int tm_year;
	int tm_wday;
	int tm_yday;
	int tm_isdst;
};

/*
 * ioctl calls that are permitted to the /dev/rtc interface, if 
 * CONFIG_RTC was enabled.
 */

#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/

#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */


#endif /* _MC146818RTC_H */