📄 if_arp.h
字号:
/* * INET An implementation of the TCP/IP protocol suite for the LINUX * operating system. INET is implemented using the BSD Socket * interface as the means of communication with the user level. * * Global definitions for the ARP (RFC 826) protocol. * * Version: @(#)if_arp.h 1.0.2 08/12/96 * * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988 * Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source. * Ross Biro, <bir7@leland.Stanford.Edu> * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> * Florian La Roche, * Jonathan Layes, <layes@loran.com> * Lawrence V. Stefani, <stefani@lkg.dec.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */#ifndef _LINUX_IF_ARP_H#define _LINUX_IF_ARP_H#include <linux/netdevice.h>/* ARP protocol HARDWARE identifiers. */#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */#define ARPHRD_EETHER 2 /* Experimental Ethernet */#define ARPHRD_AX25 3 /* AX.25 Level 2 */#define ARPHRD_PRONET 4 /* PROnet token ring */#define ARPHRD_CHAOS 5 /* Chaosnet */#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */#define ARPHRD_ARCNET 7 /* ARCnet */#define ARPHRD_APPLETLK 8 /* APPLEtalk */#define ARPHRD_DLCI 15 /* Frame Relay DLCI */#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) *//* Dummy types for non ARP hardware */#define ARPHRD_SLIP 256#define ARPHRD_CSLIP 257#define ARPHRD_SLIP6 258#define ARPHRD_CSLIP6 259#define ARPHRD_RSRVD 260 /* Notional KISS type */#define ARPHRD_ADAPT 264#define ARPHRD_ROSE 270#define ARPHRD_PPP 512#define ARPHRD_TUNNEL 768 /* IPIP tunnel */#define ARPHRD_TUNNEL6 769 /* IPIP6 tunnel */#define ARPHRD_FRAD 770 /* Frame Relay Access Device */#define ARPHRD_SKIP 771 /* SKIP vif */#define ARPHRD_LOOPBACK 772 /* Loopback device */#define ARPHRD_LOCALTLK 773 /* Localtalk device */#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface *//* ARP protocol opcodes. */#define ARPOP_REQUEST 1 /* ARP request */#define ARPOP_REPLY 2 /* ARP reply */#define ARPOP_RREQUEST 3 /* RARP request */#define ARPOP_RREPLY 4 /* RARP reply *//* ARP ioctl request. */struct arpreq { struct sockaddr arp_pa; /* protocol address */ struct sockaddr arp_ha; /* hardware address */ int arp_flags; /* flags */ struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ char arp_dev[16];};struct arpreq_old { struct sockaddr arp_pa; /* protocol address */ struct sockaddr arp_ha; /* hardware address */ int arp_flags; /* flags */ struct sockaddr arp_netmask; /* netmask (only for proxy arps) */};/* ARP Flag values. */#define ATF_COM 0x02 /* completed entry (ha valid) */#define ATF_PERM 0x04 /* permanent entry */#define ATF_PUBL 0x08 /* publish entry */#define ATF_USETRAILERS 0x10 /* has requested trailers */#define ATF_NETMASK 0x20 /* want to use a netmask (only for proxy entries) *//* * This structure defines an ethernet arp header. */struct arphdr{ unsigned short ar_hrd; /* format of hardware address */ unsigned short ar_pro; /* format of protocol address */ unsigned char ar_hln; /* length of hardware address */ unsigned char ar_pln; /* length of protocol address */ unsigned short ar_op; /* ARP opcode (command) */#if 0 /* * Ethernet looks like this : This bit is variable sized however... */ unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */ unsigned char ar_sip[4]; /* sender IP address */ unsigned char ar_tha[ETH_ALEN]; /* target hardware address */ unsigned char ar_tip[4]; /* target IP address */#endif};/* Support for the user space arp daemon, arpd */#define ARPD_UPDATE 0x01#define ARPD_LOOKUP 0x02#define ARPD_FLUSH 0x03struct arpd_request{ unsigned short req; /* request type */ __u32 ip; /* ip address of entry */ unsigned long dev; /* Device entry is tied to */ unsigned long stamp; unsigned long updated; unsigned char ha[MAX_ADDR_LEN]; /* Hardware address */};#endif /* _LINUX_IF_ARP_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -