aha1542.h

GNU Mach 微内核源代码, 基于美国卡内基美隆大学的 Mach 研究项目

#ifndef _AHA1542_H

/* $Id: aha1542.h,v 1.1 1999/04/26 05:54:12 tb Exp $
 *
 * Header file for the adaptec 1542 driver for Linux
 *
 * $Log: aha1542.h,v $
 * Revision 1.1  1999/04/26 05:54:12  tb
 * 1998-11-30  OKUJI Yoshinori  <[e-mail]>
 *
 * 	Clean up linux emulation code to make it architecture-independent
 * 	as much as possible.
 *
 * 	* linux: Renamed from linuxdev.
 * 	* Makefile.in (objfiles): Add linux.o instead of linuxdev.o.
 * 	(MAKE): New variable. Used for the linux.o target.
 * 	* configure.in: Add AC_CHECK_TOOL(MAKE, make).
 * 	* i386/i386/spl.h: Include <i386/ipl.h>, for compatibility with
 * 	OSF Mach 3.0. Suggested by Elgin Lee <[e-mail]>.
 * 	* linux/src: Renamed from linux/linux.
 * 	* linux/dev: Renamed from linux/mach.
 * 	* linux/Drivers.in (AC_INIT): Use dev/include/linux/autoconf.h,
 * 	instead of mach/include/linux/autoconf.h.
 * 	* Makefile.in (all): Target ../linux.o instead of ../linuxdev.o.
 * 	* linux/dev/drivers/block/genhd.c: Include <machine/spl.h> instead
 * 	of <i386/ipl.h>.
 * 	* linux/dev/drivers/net/auto_irq.c: Remove unneeded header files,
 * 	<i386/ipl.h> and <i386/pic.h>.
 * 	* linux/dev/init/main.c: Many i386-dependent codes moved to ...
 * 	* linux/dev/arch/i386/irq.c: ... here.
 * 	* linux/dev/arch/i386/setup.c: New file.
 * 	* linux/dev/arch/i386/linux_emul.h: Likewise.
 * 	* linux/dev/arch/i386/glue/timer.c: Merged into sched.c.
 * 	* linux/dev/arch/i386/glue/sched.c: Include <machine/spl.h> instead
 * 	of <i386/ipl.h>, and moved to ...
 * 	* linux/dev/kernel/sched.c: ... here.
 * 	* linux/dev/arch/i386/glue/block.c: Include <machine/spl.h> and
 * 	<linux_emul.h>, instead of i386-dependent header files, and
 * 	moved to ...
 * 	* linux/dev/glue/blocl.c: ... here.
 * 	* linux/dev/arch/i386/glue/net.c: Include <machine/spl.h> and
 * 	<linux_emul.h>, instead of i386-dependent header files, and
 * 	moved to ...
 * 	* linux/dev/glue/net.c: ... here.
 * 	* linux/dev/arch/i386/glue/misc.c: Remove `x86' and moved to ...
 * 	* linux/dev/glue/misc.c: ... here.
 * 	* linux/dev/arch/i386/glue/kmem.c: Moved to ...
 * 	* linux/dev/glue/kmem.c: ... here.
 *
 * Revision 1.1  1992/07/24  06:27:38  root
 * Initial revision
 *
 * Revision 1.2  1992/07/04  18:41:49  root
 * Replaced distribution with current drivers
 *
 * Revision 1.3  1992/06/23  23:58:20  root
 * Fixes.
 *
 * Revision 1.2  1992/05/26  22:13:23  root
 * Changed bug that prevented DMA above first 2 mbytes.
 *
 * Revision 1.1  1992/05/22  21:00:29  root
 * Initial revision
 *
 * Revision 1.1  1992/04/24  18:01:50  root
 * Initial revision
 *
 * Revision 1.1  1992/04/02  03:23:13  drew
 * Initial revision
 *
 * Revision 1.3  1992/01/27  14:46:29  tthorn
 * *** empty log message ***
 *
 */

#include <linux/types.h>
#include <linux/kdev_t.h>

/* I/O Port interface 4.2 */
/* READ */
#define STATUS(base) base
#define STST	0x80		/* Self Test in Progress */
#define DIAGF	0x40		/* Internal Diagnostic Failure */
#define INIT	0x20		/* Mailbox Initialization Required */
#define IDLE	0x10		/* SCSI Host Adapter Idle */
#define CDF	0x08		/* Command/Data Out Port Full */
#define DF	0x04		/* Data In Port Full */
#define INVDCMD	0x01		/* Invalid H A Command */
#define STATMASK 0xfd		/* 0x02 is reserved */

#define INTRFLAGS(base) (STATUS(base)+2)
#define ANYINTR	0x80		/* Any Interrupt */
#define SCRD	0x08		/* SCSI Reset Detected */
#define HACC	0x04		/* HA Command Complete */
#define MBOA	0x02		/* MBO Empty */
#define MBIF	0x01		/* MBI Full */
#define INTRMASK 0x8f

/* WRITE */
#define CONTROL(base) STATUS(base)
#define HRST	0x80		/* Hard Reset */
#define SRST	0x40		/* Soft Reset */
#define IRST	0x20		/* Interrupt Reset */
#define SCRST	0x10		/* SCSI Bus Reset */

/* READ/WRITE */
#define DATA(base) (STATUS(base)+1)
#define CMD_NOP		0x00	/* No Operation */
#define CMD_MBINIT	0x01	/* Mailbox Initialization */
#define CMD_START_SCSI	0x02	/* Start SCSI Command */
#define CMD_INQUIRY	0x04	/* Adapter Inquiry */
#define CMD_EMBOI	0x05	/* Enable MailBox Out Interrupt */
#define CMD_BUSON_TIME	0x07	/* Set Bus-On Time */
#define CMD_BUSOFF_TIME	0x08	/* Set Bus-Off Time */
#define CMD_DMASPEED	0x09	/* Set AT Bus Transfer Speed */
#define CMD_RETDEVS	0x0a	/* Return Installed Devices */
#define CMD_RETCONF	0x0b	/* Return Configuration Data */
#define CMD_RETSETUP	0x0d	/* Return Setup Data */
#define CMD_ECHO	0x1f	/* ECHO Command Data */

#define CMD_EXTBIOS     0x28    /* Return extend bios information only 1542C */
#define CMD_MBENABLE    0x29    /* Set Mailbox Interface enable only 1542C */

/* Mailbox Definition 5.2.1 and 5.2.2 */
struct mailbox {
  unchar status;		/* Command/Status */
  unchar ccbptr[3];		/* msb, .., lsb */
};

/* This is used with scatter-gather */
struct chain {
  unchar datalen[3];		/* Size of this part of chain */
  unchar dataptr[3];		/* Location of data */
};

/* These belong in scsi.h also */
#define any2scsi(up, p)				\
(up)[0] = (((unsigned long)(p)) >> 16)  ;	\
(up)[1] = (((unsigned long)(p)) >> 8);		\
(up)[2] = ((unsigned long)(p));

#define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )

#define xany2scsi(up, p)	\
(up)[0] = ((long)(p)) >> 24;	\
(up)[1] = ((long)(p)) >> 16;	\
(up)[2] = ((long)(p)) >> 8;	\
(up)[3] = ((long)(p));

#define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
		      + (((long)(up)[2]) <<  8) +  ((long)(up)[3]) )

#define MAX_CDB 12
#define MAX_SENSE 14

struct ccb {			/* Command Control Block 5.3 */
  unchar op;			/* Command Control Block Operation Code */
  unchar idlun;			/* op=0,2:Target Id, op=1:Initiator Id */
				/* Outbound data transfer, length is checked*/
				/* Inbound data transfer, length is checked */
				/* Logical Unit Number */
  unchar cdblen;		/* SCSI Command Length */
  unchar rsalen;		/* Request Sense Allocation Length/Disable */
  unchar datalen[3];		/* Data Length (msb, .., lsb) */
  unchar dataptr[3];		/* Data Pointer */
  unchar linkptr[3];		/* Link Pointer */
  unchar commlinkid;		/* Command Linking Identifier */
  unchar hastat;		/* Host Adapter Status (HASTAT) */
  unchar tarstat;		/* Target Device Status */
  unchar reserved[2];
  unchar cdb[MAX_CDB+MAX_SENSE];/* SCSI Command Descriptor Block */
				/* REQUEST SENSE */
};

int aha1542_detect(Scsi_Host_Template *);
int aha1542_command(Scsi_Cmnd *);
int aha1542_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
int aha1542_abort(Scsi_Cmnd *);
int aha1542_reset(Scsi_Cmnd *, unsigned int);
int aha1542_biosparam(Disk *, kdev_t, int*);

#define AHA1542_MAILBOXES 8
#define AHA1542_SCATTER 16
#define AHA1542_CMDLUN 1

#ifndef NULL
	#define NULL 0
#endif

extern struct proc_dir_entry proc_scsi_aha1542;

#define AHA1542 {  NULL, NULL,				\
                     &proc_scsi_aha1542,/* proc_dir_entry */ \
		     NULL,		                \
		     "Adaptec 1542", 			\
		     aha1542_detect,			\
		     NULL,				\
		     NULL,	 			\
		     aha1542_command,			\
		     aha1542_queuecommand,		\
		     aha1542_abort,			\
		     aha1542_reset,			\
		     NULL,				\
		     aha1542_biosparam,                 \
		     AHA1542_MAILBOXES, 		\
		     7, 				\
		     AHA1542_SCATTER, 			\
		     AHA1542_CMDLUN, 			\
		     0, 				\
		     1, 				\
		     ENABLE_CLUSTERING}

#endif