ota_prov_attr.h

The Kannel Open Source WAP and SMS gateway works as both an SMS gateway, for implementing keyword b

 * which uses clear-text passwords and is the least sophisticated 
 * authentication protocol, and CHAP stands for Challenge Handshake 
 * Authentication Protocol, a protocol used to negotiate the most secure form
 * of encrypted authentication supported by both server and client. MS_CHAP
 * (Microsoft(tm)-CHAP) is similar to the CHAP protocol, but is using an 
 * encryption scheme that is alternative to the one used for CHAP.
 */
#define WBXML_TOK_NAME_PPP_AUTHTYPE         0x22

#define WBXML_TOK_VALUE_AUTH_PAP            0x70
#define WBXML_TOK_VALUE_AUTH_CHAP           0x71
#define WBXML_TOK_VALUE_AUTH_MS_CHAP        0x78

/*
 * The PARM elements with the NAME=PPP_AUTHNAME and NAME=PPP_AUTHSECRET
 * attributes indicate the login name and password to be used. VALUEs can be 
 * assigned following:
 *
 *   VALUE -> login name(using inline string)
 *   VALUE -> password(using inline string)
 *
 * Maximum length of login name is 32 bytes.
 * Maximum length of password is 20 bytes.
 */
#define WBXML_TOK_NAME_PPP_AUTHNAME         0x23
#define WBXML_TOK_NAME_PPP_AUTHSECRET       0x24

/*
 * The PARM element with the NAME=PPP_LOGINTYPE attribute specifies whether an
 * automatic or manual login should be performed in the PPP negotiation at the
 * access point of the service provider. VALUE can be assigned following
 *
 *   VALUE -> [AUTOMATIC|MANUAL]
 *
 * (same impacts as for PROXY_LOGINTYPE)
 */
#define WBXML_TOK_NAME_PPP_LOGINTYPE        0x1D

/*
 * The PARM element with the NAME=CSD_DIALSTRING attribute specifies the 
 * MSISDN number of the modem pool. VALUE can be assigned following:
 *
 *   VALUE -> msisdn number(using inline string)
 *
 * Maximum length of msisdn number is 21 bytes.
 */
#define WBXML_TOK_NAME_CSD_DIALSTRING       0x21

/*
 * The PARM element with the NAME=CSD_CALLTYPE attribute indicates the type
 * of circuit switched call to be used for connection. VALUE can be assigned
 * following:
 *
 *   VALUE -> [*ANALOGUE*|ISDN]
 * 
 * (In general the call type should be set to ANALOGUE since ISDN is not 
 * generaly available on all networks.)
 */
#define WBXML_TOK_NAME_CSD_CALLTYPE         0x28

#define WBXML_TOK_VALUE_CONN_ANALOGUE       0x72
#define WBXML_TOK_VALUE_CONN_ISDN           0x73

/*
 * The PARM element with the NAME=CSD_CALLSPEED attribute indicates the 
 * desired call speed to be used for the connection. VALUE can be assgined
 * following:
 *
 *   VALUE -> [*AUTO*|*9600*|14400|19200|28800|38400|43200|57600]
 *
 * Default value is AUTO when CSD_CALLTYPE is ANALOGUE and 9600 when 
 * CSD_CALLTYPE is ISDN.
 */
#define WBXML_TOK_NAME_CSD_CALLSPEED        0x29

#define WBXML_TOK_VALUE_SPEED_AUTO          0x6A
#define WBXML_TOK_VALUE_SPEED_9600          0x6B
#define WBXML_TOK_VALUE_SPEED_14400         0x6C
#define WBXML_TOK_VALUE_SPEED_19200         0x6D
#define WBXML_TOK_VALUE_SPEED_28800         0x6E
#define WBXML_TOK_VALUE_SPEED_38400         0x6F
#define WBXML_TOK_VALUE_SPEED_43200         0x74
#define WBXML_TOK_VALUE_SPEED_57600         0x75

/*
 * The PARM element with the NAME=ISP_NAME attribute indicates the name of the
 * Internet Service Provider. Support of this PARM element is manufacturer
 * specific. VALUE can be assigned following:
 *
 *   VALUE -> isp name(using inline string)
 *
 * Maximum length of isp name is 20 bytes.
 */
#define WBXML_TOK_NAME_ISP_NAME             0x7E

/*
 * The PARM element with the NAME=SMS_SMSC_ADDRESS attribute indicates the 
 * MSISDN number of the SMS Service Center (SMSC). VALUE can be assigned
 * following:
 *
 *   VALUE -> sms smsc address(using inline string)
 *
 * Maximum length of sms smsc address is 21 bytes.
 */
#define WBXML_TOK_NAME_SMS_SMSC_ADDRESS     0x1A

/*
 * The PARM element with the name NAME=USSD_SERVICE_CODE attribute indicates
 * the USSD service code. VALUE can be assigned following:
 *
 *   VALUE -> ussd service code(using inline string)
 * 
 * Maximum length of ussd service code is 10 bytes.
 */
#define WBXML_TOK_NAME_USSD_SERVICE_CODE    0x1B

/*
 * The PARM element with the NAME=GPRS_ACCESSPOINTNAME attribute indicates
 * the access point name on Gateway GRPS Support Nodes (GGSN). Allowed
 * characters are: ['a'-'z','A'-'Z','0'-'9','.','-','*']
 *
 *   VALUE -> acess point name(using inline string)
 *
 * Maximum length of access point name is 100 bytes.
 */
#define WBXML_TOK_NAME_GPRS_ACCESSPOINTNAME 0x1C


/******************************************************************** 
 * CHARACTERISTIC elements with TYPE=URL 
 * 
 * The CHARACTERISTIC element with the TYPE=URL attribute has only one 
 * attribute which indicates the URL of the home page. VALUES can be assigned
 * following:
 *
 *   VALUE -> url(using inline string)
 *
 * Maximum length of URL is 100 bytes.
 *
 * Example:
 *
 *      <CHARACTERISTIC TYPE="URL" VALUE="http://wap.company.com"/>
 */

#define WBXML_TOK_TYPE_URL                  0x07


/******************************************************************** 
 * CHARACTERISTIC elements with TYPE=MMSURL 
 * 
 * The CHARACTERISTIC element with the TYPE=MMSURL attribute has only one 
 * attribute which indicates the URL of the MMSC. VALUES can be assigned
 * following:
 *
 *   VALUE -> url(using inline string)
 *
 * Maximum length of URL is 100 bytes.
 *
 * Example:
 *
 *      <CHARACTERISTIC TYPE="MMSURL" VALUE="http://wap.company.com/mmsc"/>
 */

#define WBXML_TOK_TYPE_MMSURL               0x7C


/******************************************************************** 
 * CHARACTERISTIC elements with TYPE=NAME 
 *
 * This element type must contain exactly one PARM element with NAME=NAME,
 * which states the user-recognisable name to apply for the settings. The 
 * VALUE of the PARM element can be assigned following:
 *
 *   VALUE -> name(using inline string)
 *
 * Maximum length of name is 20 bytes.
 *
 * Example:
 * 
 *      <CHARACTERISTIC TYPE="NAME">
 *          <PARM NAME="NAME" VALUE="Our company's WAP settings"/>
 *      </CHARACTERISTIC>
 */

#define WBXML_TOK_TYPE_NAME                 0x08


/******************************************************************** 
 * CHARACTERISTIC elements with TYPE=BOOKMARK 
 *
 * This element must contain exactly two PARM elements, which define the 
 * name and URL for a homepage or for bookmarks.
 *
 * When this element is used with the MIME-type *.browser-settings the first
 * element indicates the homepage to be used together with the corresponding
 * settings. Note that the URL included in this element and the CHARACTERISTIC
 * element TYPE=URL are both required to define a homepage and their content
 * must be equal. A homepage and several bookmarks can be provided in one
 * document of the MIME-type referred to above. However, the maximum number of
 * bookmarks accepted is manufacturer specific.
 *
 * When this element is used with the MIME-type *.browser-bookmarks the 
 * element indicates bookmarks only
 *
 * Example:
 *
 *      <CHARACTERISTIC TYPE="BOOKMARK">
 *          <PARM NAME="NAME" VALUE="Our company's WAP site"/>
 *          <PARM NAME="URL" VALUE="http://wap.company.com"/>
 *      </CHARACTERISTIC>
 */

#define WBXML_TOK_TYPE_BOOKMARK             0x7F

/*
 * The PARM element with the NAME=NAME attribute indicates the name of the
 * bookmark or homepage. VALUE can be assigned following:
 *
 *   VALUE -> bookmark name(using inline string)
 *
 * Maximum length of bookmark name is 50 bytes.
 */
#define WBXML_TOK_NAME_NAME                 0x15

/*
 * The PARM element with the NAME=URL attribute indicates the URL of the
 * bookmark or homepage. VALUE can be assigned following:
 *
 *   VALUE -> bookmark url(using inline string)
 *
 * Maximum length of bookmark url is 255 bytes.
 */
#define WBXML_TOK_NAME_URL                  0x17


/******************************************************************** 
 * CHARACTERISTIC elements with TYPE=ID 
 *
 * This element type must contain exactly one PARM element, which defines an
 * ID to be used to provide some security to the provisioning application. 
 * The ID should be known by the subscriber through the subscription or 
 * through other communication with the operator. When provisioning data
 * containing the ID is received the user is able to verify the received ID
 * with the ID previously received by other means from the operator. Support
 * of this CHARACTERISTIC element is manufacturer specific.
 *
 * Example:
 *
 *      <CHARACTERISTIC TYPE="ID">
 *          <PARM NAME="NAME" VALUE="12345678"/>
 *      </CHARACTERISTIC>
 */

#define WBXML_TOK_TYPE_ID                   0x7D

/*
 * The PARM elment with the NAME=NAME attribute indicates the ID. VALUE can be
 * assigned following:
 *
 *   VALUE -> id(using inline string)
 *
 * Maximum length of id is 8 bytes.
 */

/* end of ota_prov_attr.h */