⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 cunixf.cpp

📁 著名的 helix realplayer 基于手机 symbian 系统的 播放器全套源代码
💻 CPP
字号:
/* ***** BEGIN LICENSE BLOCK ***** 
 * Version: RCSL 1.0/RPSL 1.0 
 *  
 * Portions Copyright (c) 1995-2002 RealNetworks, Inc. All Rights Reserved. 
 *      
 * The contents of this file, and the files included with this file, are 
 * subject to the current version of the RealNetworks Public Source License 
 * Version 1.0 (the "RPSL") available at 
 * http://www.helixcommunity.org/content/rpsl unless you have licensed 
 * the file under the RealNetworks Community Source License Version 1.0 
 * (the "RCSL") available at http://www.helixcommunity.org/content/rcsl, 
 * in which case the RCSL will apply. You may also obtain the license terms 
 * directly from RealNetworks.  You may not use this file except in 
 * compliance with the RPSL or, if you have a valid RCSL with RealNetworks 
 * applicable to this file, the RCSL.  Please see the applicable RPSL or 
 * RCSL for the rights, obligations and limitations governing use of the 
 * contents of the file.  
 *  
 * This file is part of the Helix DNA Technology. RealNetworks is the 
 * developer of the Original Code and owns the copyrights in the portions 
 * it created. 
 *  
 * This file, and the files included with this file, is distributed and made 
 * available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER 
 * EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS ALL SUCH WARRANTIES, 
 * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS 
 * FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. 
 * 
 * Technology Compatibility Kit Test Suite(s) Location: 
 *    http://www.helixcommunity.org/content/tck 
 * 
 * Contributor(s): 
 *  
 * ***** END LICENSE BLOCK ***** */ 

#include <stdio.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>

#include "chxdataf.h"
#include "cunixf.h"
#include "hxheap.h"
#include "hxresult.h"

#if !defined _VXWORKS && !defined __QNXNTO__
extern int errno;
#endif

#define  HX_FILE_NOT_OPEN    -1000

CHXDataFile*
CHXDataFile::Construct (UINT32 ulFlags, IUnknown** ppCommonObj)
{
    return new CUnixFile;
}

// CHXFile should set the file reference to a value
// indicating the file is not open

CUnixFile::CUnixFile (void)
{
        // set FD to indicate file is not open
        mFD = HX_FILE_NOT_OPEN;
        mLastError = HXR_OK;
}

// ~CHXFile should close the file if it is open
CUnixFile::~CUnixFile(void)
{ 
        // close the file if it is open
        if ( mFD > 0 )
        {
           close( mFD );
        }
}

// Following comments and code of GetSize were directly taken from the 
// windows implementation ../win/cwinfile.cpp

// Simply uses stat to get the size of the file in bytes.  If the file
// is closed, it will still work.
ULONG32 CUnixFile::GetSize(void)
{
    struct stat filestats;
    if (mFD >= 0)
    {
        fstat(mFD, &filestats);
        return filestats.st_size;
    }
    return 0;
}


// Create a file with the specified mode
// Closes the previous file if it was open
// returns HXR_OK or HXR_INVALID_FILE if an error occurred

HX_RESULT CUnixFile::Create(const char *filename, UINT16 mode, BOOL textflag)
{
        // close previous file if necessary
        if ( mFD > 0 )
            close( mFD );

        // create file
        mLastError = HXR_OK;
        if ( ( mFD = creat( filename, mode ) ) < 0 )
        {
           mLastError = errno;
           return HXR_DOC_MISSING;
        }
        return HXR_OK;
}

// Open a file with the specified mode
// Closes the previous file if it was open
// returns HXR_OK or HXR_INVALID_FILE if an error occurred

HX_RESULT CUnixFile::Open(const char *filename, UINT16 mode, BOOL textflag)
{
        // close previous file if necessary
        if ( mFD > 0 )
            close( mFD );

        // open file
        mLastError = HXR_OK;
#ifndef _VXWORKS /* VXWORKS uses FAT32 */
#define OPENFLAGS (S_IREAD | S_IWRITE)
#else
#endif
        if ( ( mFD = open( filename, mode, OPENFLAGS ) ) < 0 )
        {
           mLastError = errno;
           return HXR_DOC_MISSING;
        }
        // change permissions to allow everyone to read the file and owner to write
	// only if I have to create this file
#if !defined(_VXWORKS) && !defined(_BEOS)
	if ( mode & O_CREAT )
        fchmod( mFD, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH );
#endif

        return HXR_OK;
}

// Close the previous file if it was open
// returns HXR_OK or HXR_INVALID_FILE if an error occurred

HX_RESULT CUnixFile::Close(void)
{
        // close previous file if necessary
        if ( mFD > 0 )
        {
           mLastError = HXR_OK;   
           if ( close( mFD ) < 0 )
           {
              mLastError = errno;
              return HXR_INVALID_FILE;
           }
         return HXR_OK;
        }
        return HXR_INVALID_FILE;
}

HX_RESULT CUnixFile::Delete(const char* pFilename)
{
    if(mFD > 0)
    {
	close(mFD);
    }
    mLastError = HXR_OK;
    if(unlink(pFilename))
    {
	if(errno == EACCES)
	{
	    mLastError = HXR_ACCESSDENIED;
	}
	else
	{
	    mLastError = HXR_DOC_MISSING;
	}
    }
    return mLastError;
}

// Seek moves the current file position to the offset from the fromWhere
// specifier returns HXR_OK or HXR_INVALID_FILE if an error occurred

HX_RESULT CUnixFile::Seek(ULONG32 offset, UINT16 fromWhere)
{
        if ( mFD > 0 )
        {
           mLastError = HXR_OK;       
           if ( lseek( mFD, offset, fromWhere ) < 0 )
           {
              mLastError = errno;
              return HXR_INVALID_FILE;
           }
         return HXR_OK;
        }
      return HXR_INVALID_FILE;
}

// Rewind sets the file position to the start of file
// returns HXR_OK or HXR_INVALID_FILE if an error occurred
HX_RESULT CUnixFile::Rewind(void)
{
        if ( mFD > 0 )
        {
           mLastError = HXR_OK;       
           if ( lseek( mFD, 0, SEEK_SET ) < 0 )
           {
              mLastError = errno;
              return HXR_INVALID_FILE;
           }
         return HXR_OK;
        }
        return HXR_INVALID_FILE;
}


// Tell returns the current file position
// returns HXR_OK or -1 if an error occurred
ULONG32 CUnixFile::Tell(void)
{   
        long offset = -1;
        if ( mFD > 0 )
        {
           mLastError = HXR_OK;       
         // the tell() function will consistently generate a warning 
         // and I haven't figured out how to fix that yet
/****
           if ((offset = tell( mFD )) < 0 )
           {
              mLastError = errno;
           }
****/
			// so we do this instead....
			if ((offset = lseek( mFD, 0, SEEK_CUR )) < 0 )
			{
				mLastError = errno;
			}
        }
        return (ULONG32)offset;
}

/*      Read reads up to count bytes of data into buf.
        returns the number of bytes read, EOF, or -1 if the read failed */

ULONG32 CUnixFile::Read (char *buf, ULONG32 count)
{
	int ncnt = -1;           // number of bytes read

	if ( mFD > 0 )
 	{ 
		mLastError = HXR_OK;
		ULONG32 tmpCheck = Tell();

		if ( ( ncnt = read( mFD, buf, count ) ) < 0 )
		{
			mLastError = errno;
		}
	}
	return (ULONG32)ncnt;
}

/*      Write writes up to count bytes of data from buf.
        returns the number of bytes written, or -1 if the write failed */

ULONG32 CUnixFile::Write(const char *buf, ULONG32 count)
{
        int ncnt = -1;           // number of bytes written

      if ( mFD > 0 )
      { mLastError = HXR_OK;

          if ( ( ncnt = write( mFD, buf, count ) ) < 0 )
          {
             mLastError = errno;
          }
      }

        return (ULONG32)ncnt;
}

BOOL CUnixFile::GetTemporaryFileName(const char *tag, char* name, UINT32 ulBufLen)
{
#ifdef _MAC_UNIX

	// GR 7/15/03 other Unix implementations should probably use this (or tempnam)
	// instead of tmpnam
	
	const int kBuffsize = 1024;
	char buff[kBuffsize];

	int count = snprintf(buff, kBuffsize, "/tmp/%s_XXXXXX", tag);

	if (count > 0 && count < kBuffsize)
	{
		// replace the X's with digits
		if (mktemp(buff) != NULL)
		{
			strncpy(name, buff, ulBufLen);
			return TRUE;
		}
	}
	return FALSE;
	
#else
	if (tmpnam(name))
		return TRUE;
	else
		return FALSE;
#endif
}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -