📄 hxclreg.h
字号:
/* ***** BEGIN LICENSE BLOCK *****
* Version: RCSL 1.0/RPSL 1.0
*
* Portions Copyright (c) 1995-2002 RealNetworks, Inc. All Rights Reserved.
*
* The contents of this file, and the files included with this file, are
* subject to the current version of the RealNetworks Public Source License
* Version 1.0 (the "RPSL") available at
* http://www.helixcommunity.org/content/rpsl unless you have licensed
* the file under the RealNetworks Community Source License Version 1.0
* (the "RCSL") available at http://www.helixcommunity.org/content/rcsl,
* in which case the RCSL will apply. You may also obtain the license terms
* directly from RealNetworks. You may not use this file except in
* compliance with the RPSL or, if you have a valid RCSL with RealNetworks
* applicable to this file, the RCSL. Please see the applicable RPSL or
* RCSL for the rights, obligations and limitations governing use of the
* contents of the file.
*
* This file is part of the Helix DNA Technology. RealNetworks is the
* developer of the Original Code and owns the copyrights in the portions
* it created.
*
* This file, and the files included with this file, is distributed and made
* available on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
* EXPRESS OR IMPLIED, AND REALNETWORKS HEREBY DISCLAIMS ALL SUCH WARRANTIES,
* INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
*
* Technology Compatibility Kit Test Suite(s) Location:
* http://www.helixcommunity.org/content/tck
*
* Contributor(s):
*
* ***** END LICENSE BLOCK ***** */
#ifndef _HXCLIENTREG_H_
#define _HXCLIENTREG_H_
struct IHXRegistry;
class CommonRegistry;
class HXClientRegistry : public IHXRegistry
{
protected:
virtual ~HXClientRegistry();
PRIVATE_DESTRUCTORS_ARE_NOT_A_CRIME
LONG32 m_lRefCount;
CommonRegistry* m_pPropDB;
IUnknown* m_pContext;
public:
HXClientRegistry();
void Init (IUnknown* pContext);
void Close (void);
/*
* IUnknown methods
*/
STDMETHOD(QueryInterface) (THIS_
REFIID riid,
void** ppvObj);
STDMETHOD_(ULONG32,AddRef) (THIS);
STDMETHOD_(ULONG32,Release) (THIS);
/*
* IHXRegistry methods
*/
/************************************************************************
* Method:
* IHXRegistry::CreatePropWatch
* Purpose:
* Create a new IUnknown object which can then be queried for the
* right kind of IHXPropWatch object.
*/
STDMETHOD(CreatePropWatch) (THIS_
REF(IHXPropWatch*) pPropWatch);
/************************************************************************
* Method:
* HXRegistry::AddComp
* Purpose:
* Add a COMPOSITE property to the registry and return its hash
* key value if successful. It returns ZERO (0) if an error occured
* during the operation.
*/
STDMETHOD_(UINT32, AddComp) (THIS_
const char* pName);
/************************************************************************
* Method:
* HXRegistry::AddInt
* Purpose:
* Add an INTEGER property with name in "pName" and value in
* "iValue" to the registry. The return value is the id to
* the newly added Property or ZERO if there was an error.
*/
STDMETHOD_(UINT32, AddInt) (THIS_
const char* pName,
const INT32 iValue);
/************************************************************************
* Method:
* HXRegistry::GetInt
* Purpose:
* Retreive an INTEGER value from the registry given its Property
* name "pName" or by its id "id". If the Property
* is found, it will return HXR_OK, otherwise it returns HXR_FAIL.
*/
STDMETHOD(GetIntByName) (THIS_
const char* pName,
REF(INT32) nValue) const;
STDMETHOD(GetIntById) (THIS_
const UINT32 id,
REF(INT32) nValue) const;
/************************************************************************
* Method:
* HXRegistry::SetIntByXYZ
* Purpose:
* Modify a Property's INTEGER value in the registry given the
* Property's name "pName" or its id "id". If the value
* was set, it will return HXR_OK, otherwise it returns HXR_FAIL.
*/
STDMETHOD(SetIntByName) (THIS_
const char* pName,
const INT32 iValue);
STDMETHOD(SetIntById) (THIS_
const UINT32 id,
const INT32 iValue);
/************************************************************************
* Method:
* HXRegistry::AddStr
* Purpose:
* Add an STRING property with name in "pName" and value in
* "pcValue" to the registry.
*/
STDMETHOD_(UINT32, AddStr) (THIS_
const char* pName,
IHXBuffer* pValue);
/************************************************************************
* Method:
* HXRegistry::GetStrByXYZ
* Purpose:
* Retreive an STRING value from the registry given its Property
* name "pName" or by its id "id". If the Property
* is found, it will return HXR_OK, otherwise it returns HXR_FAIL.
*/
STDMETHOD(GetStrByName) (THIS_
const char* pName,
REF(IHXBuffer*) pValue) const;
STDMETHOD(GetStrById) (THIS_
const UINT32 id,
REF(IHXBuffer*) pValue) const;
/************************************************************************
* Method:
* HXRegistry::SetStrByXYZ
* Purpose:
* Modify a Property's STRING value in the registry given the
* Property's name "pName" or its id "id". If the value
* was set, it will return HXR_OK, otherwise it returns HXR_FAIL.
*/
STDMETHOD(SetStrByName) (THIS_
const char* pName,
IHXBuffer* pValue);
STDMETHOD(SetStrById) (THIS_
const UINT32 id,
IHXBuffer* pValue);
/************************************************************************
* Method:
* HXRegistry::AddBuf
* Purpose:
* Add an BUFFER property with name in "pName" and value in
* "pValue" to the registry.
*/
STDMETHOD_(UINT32, AddBuf) (THIS_
const char* pName,
IHXBuffer* pValue);
/************************************************************************
* Method:
* HXRegistry::GetStrByXYZ
* Purpose:
* Retreive the BUFFER from the registry given its Property
* name "pName" or its id "id". If the Property
* is found, it will return HXR_OK, otherwise it returns HXR_FAIL.
*/
STDMETHOD(GetBufByName) (THIS_
const char* pName,
REF(IHXBuffer*) ppValue) const;
STDMETHOD(GetBufById) (THIS_
const UINT32 id,
REF(IHXBuffer*) ppValue) const;
/************************************************************************
* Method:
* HXRegistry::SetBufByXYZ
* Purpose:
* Modify a Property's BUFFER in the registry given the
* Property's name "pName" or its id "id". If the value
* was set, it will return HXR_OK, otherwise it returns HXR_FAIL.
*/
STDMETHOD(SetBufByName) (THIS_
const char* pName,
IHXBuffer* pValue);
STDMETHOD(SetBufById) (THIS_
const UINT32 id,
IHXBuffer* pValue);
/************************************************************************
* Method:
* HXRegistry::AddIntRef
* Purpose:
* Add an INTEGER REFERENCE property with name in "pName" and
* value in "iValue" to the registry. This property allows the user
* to modify its contents directly, without having to go through the
* registry.
*/
STDMETHOD_(UINT32, AddIntRef) (THIS_
const char* pName,
INT32* piValue);
/************************************************************************
* Method:
* HXRegistry::DeleteByXYZ
* Purpose:
* Delete a Property from the registry using its name "pName"
* or id "id".
*/
STDMETHOD_(UINT32, DeleteByName) (THIS_
const char* pName);
STDMETHOD_(UINT32, DeleteById) (THIS_
const UINT32 id);
/************************************************************************
* Method:
* HXRegistry::GetTypeByXYZ
* Purpose:
* Returns the datatype of the Property given its name "pName"
* or its id "id".
*/
STDMETHOD_(HXPropType, GetTypeByName) (THIS_
const char* pName) const;
STDMETHOD_(HXPropType, GetTypeById) (THIS_
const UINT32 id) const;
/************************************************************************
* Method:
* HXRegistry::FindParentIdByXYZ
* Purpose:
* Returns the id value of the parent node if it exists.
* If it fails, a ZERO value is returned.
*/
STDMETHOD_(UINT32, FindParentIdByName) (THIS_
const char* pName) const;
STDMETHOD_(UINT32, FindParentIdById) (THIS_
const UINT32 id) const;
/************************************************************************
* Method:
* HXRegistry::GetPropName
* Purpose:
* Returns the Property name in the pName char buffer passed
* as a parameter, given the Property's id "ulId".
*/
STDMETHOD(GetPropName) (THIS_
const UINT32 ulId,
REF(IHXBuffer*) pName) const;
/************************************************************************
* Method:
* HXRegistry::GetId
* Purpose:
* Returns the Property's id given the Property name.
*/
STDMETHOD_(UINT32, GetId) (THIS_
const char* pName) const;
/************************************************************************
* Method:
* IHXRegistry::GetPropListOfRoot
* Purpose:
* Returns an array of a Properties under the root level of the
* registry's hierarchy.
*/
STDMETHOD(GetPropListOfRoot) (THIS_
REF(IHXValues*) pValues) const;
/************************************************************************
* Method:
* IHXRegistry::GetPropListByXYZ
* Purpose:
* Returns an array of Properties immediately under the one with
* name "pName" or id "id".
*/
STDMETHOD(GetPropListByName) (THIS_
const char* pName,
REF(IHXValues*) pValues) const;
STDMETHOD(GetPropListById) (THIS_
const UINT32 id,
REF(IHXValues*) pValues) const;
/************************************************************************
* Method:
* HXRegistry::GetNumProps
* Purpose:
* Returns the count of the number of Properties within the
* registry. If a property name of id is specified, then it
* returns the number of Properties under it.
*/
STDMETHOD_(INT32, GetNumPropsAtRoot) (THIS) const;
STDMETHOD_(INT32, GetNumPropsByName)(THIS_
const char* pName) const;
STDMETHOD_(INT32, GetNumPropsById) (THIS_
const UINT32 id) const;
};
#endif /*_HXCLIENTREG_H_*/
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -