jacorb.properties

《J2EE企业级应用开发》一书的配套源代码

##  $Id: jacorb.properties,v 1.1.2.3 2002/08/03 21:43:09 reverbel Exp $

###############################################################################
##                                                                           ##
##               JacORB configuration for the JBoss server                   ##
##                                                                           ##
###############################################################################

##################################
#                                #
#   ORB version number output    #
#                                #
##################################

# if on, the ORB's version number is printed whenever the ORB is initialized
jacorb.orb.print_version=off

##################################
#                                #
#   Debug output configuration   #
#                                #
##################################

# verbosity level 
# 0 = off
# 1 = important messages and exceptions
# 2 = informational messages and exceptions
# >= 3 = debug-level output (may confuse the unaware user :-)
jacorb.verbosity=0

# where does debug output go? Terminal is default
#jacorb.logfile=LOGFILEPATH

# hexdump outgoing messages
jacorb.debug.dump_outgoing_messages=off

# hexdump incoming messages
jacorb.debug.dump_incoming_messages=off

###############################################################################
#                                                                             #
#    WARNING: The following properties should only be edited by the expert    #
#             user. They can be left untouched in most cases!                 #
#                                                                             #
###############################################################################

################################
#                              #
#   Basic ORB Configuration    #
#                              #
################################

# the GIOP minor version number to use for newly created IORs
jacorb.giop_minor_version=2

# number of retries if connection cannot directly be established
jacorb.retries=5

# how many msecs. do we wait between retries
jacorb.retry_interval=500

# size of network buffers for outgoing messages
jacorb.outbuf_size=2048

# log2 of maximum buffer size managed by the internal 
# buffer manager. 
#
# This is NOT the maximum buffer size that
# can be used, but just the largest size of buffers that
# will be kept and managed. This value will be added to
# an internal constant of 5, so the real value in bytes
# is 2**(5+maxManagedBufSize-1). You only need to increase this
# value if you are dealing with LOTS of LARGE data structures.
# You may decrease it to make the buffer manager release large
# buffers immediately rather than keeping them for later 
# reuse.
jacorb.maxManagedBufSize=18

# client-side timeout, set no non-zero to stop blocking
# after so many msecs.
#jacorb.connection.client_timeout=0

# max time a server keeps a connection open if nothing happens
#jacorb.connection.server_timeout=10000

#jacorb.reference_caching=off

# The following property specifies the class which is used for
# reference caching. WeakHashtable uses WeakReferences, so entries
# get gc'ed if only the Hashtable has a reference to them. This
# is useful if you have many references to short-living non-persistent
# CORBA objects. It is only available for java 1.2 and above.
#
# On the other hand the standard Hashtable keeps the references until
# they are explicitely deleted by calling _release(). This is useful
# for persistent and long-living CORBA objects.
#
jacorb.hashtable_class=org.jacorb.util.WeakHashtable
#
#jacorb.hashtable_class=java.util.Hashtable

# use GIOP 1.2 byte order markers (since CORBA 2.4-5)
jacorb.use_bom=off

# add additional IIOP 1.0 profiles even if we are using IIOP 1.2
jacorb.giop.add_1_0_profiles=off

###########################################
#                                         #
#         Socket Factories                #
#                                         #
###########################################

# A factory design pattern is used for the creation of sockets and server
# sockets.
# The jacorb.net.socket_factory property can be used to configure
# a socket factory that must implement the operations defined in the
# interface org.jacorb.orb.factory.SocketFactory.
# The jacorb.net.server_socket_factory property can be used to configure a
# server socket factory that must implement the operations defined in the
# interface org.jacorb.orb.factory.ServerSocketFactory.
#
#jacorb.net.socket_factory=org.jacorb.orb.factory.DefaultSocketFactory
#jacorb.net.server_socket_factory=org.jacorb.orb.factory.DefaultServerSocketFactory
#
# An additional socket factory is supported that allows for the configuration
# of maximum and minimum port numbers that can be used. This can be used to
# enable firewall traversal via a fixed port range. To use this socket factory
# configure the following two properties.
#
#jacorb.net.socket_factory.port.min
#jacorb.net.socket_factory.port.max

###########################################
#                                         #
#         BiDirectional GIOP              #
#                                         #
###########################################

# uncomment this initializer if you want to use BiDirectional GIOP

#org.omg.PortableInterceptor.ORBInitializerClass.bidir_init=org.jacorb.orb.connection.BiDirConnectionInitializer

###########################################
#                                         #
#       Proxy address in IOR              #
#                                         #
###########################################

# with these two properties it is possible to 
# tell the ORB what IP/port IORs should contain,
# if the ServerSockets IP/port can't be used
# (e.g. for traffic through a firewall). 
#
# WARNING: this is just "dumb" replacing, so you 
# have to take care of your configuration!
#

#jacorb.ior_proxy_host=1.2.3.4
#jacorb.ior_proxy_port=4711

###########################################
#                                         #
#   The Object Adapter Internet Address   #
#                                         #
###########################################

# IP address on multi-homed host (this gets encoded in
# object references). NOTE: Adresses like 127.0.0.X
# will only be accessible from the same machine!
#OAIAddr=1.2.3.4

# This is the IIOP port officially assigned to JBoss by IANA:
OAPort=3528
#               (We have used OAPort=8683 for some time,
#                until we got an IIOP port assignment.)

############################
#                          #
#   Default Interceptor    #
#   Please leave it in!    #
#                          #
############################
org.omg.PortableInterceptor.ORBInitializerClass.standard_init=org.jacorb.orb.standardInterceptors.IORInterceptorInitializer

###############################################
#                                             #
#   Implementation Repository Configuration   #
#                                             #
###############################################
# Switch off to avoid contacting the ImR on every server start-up
jacorb.use_imr=off

# the implementation name, should be set to a different 
# name in the code of persistent servers
jacorb.implname=JBoss

#########################
#                       #
#   SSL Configuration   #
#                       #
#########################

jacorb.security.support_ssl=off

jacorb.security.ssl.client.supported_options=0
jacorb.security.ssl.client.required_options=0

jacorb.security.ssl.server.supported_options=0
jacorb.security.ssl.server.required_options=0

#########################
#                       #
#   POA Configuration   #
#                       #
#########################

# displays a GUI monitoring tool for servers
jacorb.poa.monitoring=off

# thread pool configuration for request processing
jacorb.poa.thread_pool_max=4
jacorb.poa.thread_pool_min=2

# if set, request processing threads in thePOA
# will run at this priority. If not set or invalid,
# MAX_PRIORITY will be used.
#jacorb.poa.thread_priority=

# size of the request queue, clients will receive Corba.TRANSIENT
# exceptions if load exceeds this limit
jacorb.poa.queue_max=100