📄 courier.c
字号:
/* * Copyright (c) 1986, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */#ifndef lintstatic char sccsid[] = "@(#)courier.c 8.1 (Berkeley) 6/6/93";#endif /* not lint *//* * Routines for calling up on a Courier modem. * Derived from Hayes driver. */#include "tip.h"#include <stdio.h>#define MAXRETRY 5static void sigALRM();static int timeout = 0;static int connected = 0;static jmp_buf timeoutbuf, intbuf;static int coursync();cour_dialer(num, acu) register char *num; char *acu;{ register char *cp;#ifdef ACULOG char line[80];#endif static int cour_connect(), cour_swallow(); if (boolean(value(VERBOSE))) printf("Using \"%s\"\n", acu); ioctl(FD, TIOCHPCL, 0); /* * Get in synch. */ if (!coursync()) {badsynch: printf("can't synchronize with courier\n");#ifdef ACULOG logent(value(HOST), num, "courier", "can't synch up");#endif return (0); } cour_write(FD, "AT E0\r", 6); /* turn off echoing */ sleep(1);#ifdef DEBUG if (boolean(value(VERBOSE))) cour_verbose_read();#endif ioctl(FD, TIOCFLUSH, 0); /* flush any clutter */ cour_write(FD, "AT C1 E0 H0 Q0 X6 V1\r", 21); if (!cour_swallow("\r\nOK\r\n")) goto badsynch; fflush(stdout); cour_write(FD, "AT D", 4); for (cp = num; *cp; cp++) if (*cp == '=') *cp = ','; cour_write(FD, num, strlen(num)); cour_write(FD, "\r", 1); connected = cour_connect();#ifdef ACULOG if (timeout) { sprintf(line, "%d second dial timeout", number(value(DIALTIMEOUT))); logent(value(HOST), num, "cour", line); }#endif if (timeout) cour_disconnect(); return (connected);}cour_disconnect(){ /* first hang up the modem*/ ioctl(FD, TIOCCDTR, 0); sleep(1); ioctl(FD, TIOCSDTR, 0); coursync(); /* reset */ close(FD);}cour_abort(){ cour_write(FD, "\r", 1); /* send anything to abort the call */ cour_disconnect();}static voidsigALRM(){ printf("\07timeout waiting for reply\n"); timeout = 1; longjmp(timeoutbuf, 1);}static intcour_swallow(match) register char *match; { sig_t f; char c; f = signal(SIGALRM, sigALRM); timeout = 0; do { if (*match =='\0') { signal(SIGALRM, f); return (1); } if (setjmp(timeoutbuf)) { signal(SIGALRM, f); return (0); } alarm(number(value(DIALTIMEOUT))); read(FD, &c, 1); alarm(0); c &= 0177;#ifdef DEBUG if (boolean(value(VERBOSE))) putchar(c);#endif } while (c == *match++);#ifdef DEBUG if (boolean(value(VERBOSE))) fflush(stdout);#endif signal(SIGALRM, SIG_DFL); return (0);}struct baud_msg { char *msg; int baud;} baud_msg[] = { "", B300, " 1200", B1200, " 2400", B2400, " 9600", B9600, " 9600/ARQ", B9600, 0, 0,};static intcour_connect(){ char c; int nc, nl, n; struct sgttyb sb; char dialer_buf[64]; struct baud_msg *bm; sig_t f; if (cour_swallow("\r\n") == 0) return (0); f = signal(SIGALRM, sigALRM);again: nc = 0; nl = sizeof(dialer_buf)-1; bzero(dialer_buf, sizeof(dialer_buf)); timeout = 0; for (nc = 0, nl = sizeof(dialer_buf)-1 ; nl > 0 ; nc++, nl--) { if (setjmp(timeoutbuf)) break; alarm(number(value(DIALTIMEOUT))); n = read(FD, &c, 1); alarm(0); if (n <= 0) break; c &= 0x7f; if (c == '\r') { if (cour_swallow("\n") == 0) break; if (!dialer_buf[0]) goto again; if (strcmp(dialer_buf, "RINGING") == 0 && boolean(value(VERBOSE))) {#ifdef DEBUG printf("%s\r\n", dialer_buf);#endif goto again; } if (strncmp(dialer_buf, "CONNECT", sizeof("CONNECT")-1) != 0) break; for (bm = baud_msg ; bm->msg ; bm++) if (strcmp(bm->msg, dialer_buf+sizeof("CONNECT")-1) == 0) { if (ioctl(FD, TIOCGETP, &sb) < 0) { perror("TIOCGETP"); goto error; } sb.sg_ispeed = sb.sg_ospeed = bm->baud; if (ioctl(FD, TIOCSETP, &sb) < 0) { perror("TIOCSETP"); goto error; } signal(SIGALRM, f);#ifdef DEBUG if (boolean(value(VERBOSE))) printf("%s\r\n", dialer_buf);#endif return (1); } break; } dialer_buf[nc] = c;#ifdef notdef if (boolean(value(VERBOSE))) putchar(c);#endif }error1: printf("%s\r\n", dialer_buf);error: signal(SIGALRM, f); return (0);}/* * This convoluted piece of code attempts to get * the courier in sync. */static intcoursync(){ int already = 0; int len; char buf[40]; while (already++ < MAXRETRY) { ioctl(FD, TIOCFLUSH, 0); /* flush any clutter */ cour_write(FD, "\rAT Z\r", 6); /* reset modem */ bzero(buf, sizeof(buf)); sleep(1); ioctl(FD, FIONREAD, &len); if (len) { len = read(FD, buf, sizeof(buf));#ifdef DEBUG buf[len] = '\0'; printf("coursync: (\"%s\")\n\r", buf);#endif if (index(buf, '0') || (index(buf, 'O') && index(buf, 'K'))) return(1); } /* * If not strapped for DTR control, * try to get command mode. */ sleep(1); cour_write(FD, "+++", 3); sleep(1); /* * Toggle DTR to force anyone off that might have left * the modem connected. */ ioctl(FD, TIOCCDTR, 0); sleep(1); ioctl(FD, TIOCSDTR, 0); } cour_write(FD, "\rAT Z\r", 6); return (0);}cour_write(fd, cp, n)int fd;char *cp;int n;{ struct sgttyb sb;#ifdef notdef if (boolean(value(VERBOSE))) write(1, cp, n);#endif ioctl(fd, TIOCGETP, &sb); ioctl(fd, TIOCSETP, &sb); cour_nap(); for ( ; n-- ; cp++) { write(fd, cp, 1); ioctl(fd, TIOCGETP, &sb); ioctl(fd, TIOCSETP, &sb); cour_nap(); }}#ifdef DEBUGcour_verbose_read(){ int n = 0; char buf[BUFSIZ]; if (ioctl(FD, FIONREAD, &n) < 0) return; if (n <= 0) return; if (read(FD, buf, n) != n) return; write(1, buf, n);}#endif/* * Code stolen from /usr/src/lib/libc/gen/sleep.c */#define mask(s) (1<<((s)-1))#define setvec(vec, a) \ vec.sv_handler = a; vec.sv_mask = vec.sv_onstack = 0static napms = 50; /* Give the courier 50 milliseconds between characters */static int ringring;cour_nap(){ static void cour_napx(); int omask; struct itimerval itv, oitv; register struct itimerval *itp = &itv; struct sigvec vec, ovec; timerclear(&itp->it_interval); timerclear(&itp->it_value); if (setitimer(ITIMER_REAL, itp, &oitv) < 0) return; setvec(ovec, SIG_DFL); omask = sigblock(mask(SIGALRM)); itp->it_value.tv_sec = napms/1000; itp->it_value.tv_usec = ((napms%1000)*1000); setvec(vec, cour_napx); ringring = 0; (void) sigvec(SIGALRM, &vec, &ovec); (void) setitimer(ITIMER_REAL, itp, (struct itimerval *)0); while (!ringring) sigpause(omask &~ mask(SIGALRM)); (void) sigvec(SIGALRM, &ovec, (struct sigvec *)0); (void) setitimer(ITIMER_REAL, &oitv, (struct itimerval *)0); (void) sigsetmask(omask);}static voidcour_napx(){ ringring = 1;}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -