⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ser-go32.c

📁 早期freebsd实现
💻 C
字号:
/* Remote serial interface for GO32, for GDB, the GNU Debugger.   Copyright 1992 Free Software Foundation, Inc.This file is part of GDB.This program is free software; you can redistribute it and/or modifyit under the terms of the GNU General Public License as published bythe Free Software Foundation; either version 2 of the License, or(at your option) any later version.This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; without even the implied warranty ofMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See theGNU General Public License for more details.You should have received a copy of the GNU General Public Licensealong with this program; if not, write to the Free SoftwareFoundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  *//* This file shows most of the obvious problems of code written for   the IBM PC.  FIXME.    -- gnu@cygnus.com, Sep92 */#include "defs.h"#include "serial.h"#include <sys/dos.h>#define SIGNATURE 0x4154#define VERSION 1#define OFFSET 0x104/*#define MONO 1*/#define dprintf if(0)printf#ifdef __GNUC__#define far#define peek(a,b) (*(unsigned short *)(0xe0000000 + (a)*16 + (b)))#endiftypedef struct {  short jmp_op;  short signature;  short version;  short buffer_start;  short buffer_end;  short getp;  short putp;  short iov;} ASYNC_STRUCT;static ASYNC_STRUCT far *async;static int iov;#define com_rb	iov#define com_tb	iov#define com_ier	iov+1#define com_ifr	iov+2#define com_bfr	iov+3#define com_mcr	iov+4#define com_lsr	iov+5#define com_msr	iov+6static int fd;#if MONO#include <sys/pc.h>static int mono_pos=0;#define mono_rx 0x07#define mono_tx 0x70voidmono_put(char byte, char attr){  ScreenSecondary[320+mono_pos+80] = 0x0720;  ScreenSecondary[320+mono_pos] = (attr<<8) | (byte&0xff);  mono_pos = (mono_pos+1) % 1200;}#endifstatic char far *aptr(short p){#ifdef __GNUC__  return (char *)((unsigned)async - OFFSET + p);#else  return (char far *)MK_FP(FP_SEG(async), p);#endif}static ASYNC_STRUCT far *getivec(int which){  ASYNC_STRUCT far *a;  if (peek(0, which*4) != OFFSET)    return 0;#ifdef __GNUC__  a = (ASYNC_STRUCT *)(0xe0000000 + peek(0, which*4+2)*16 + peek(0, which*4));#else  a = (ASYNC_STRUCT far *)MK_FP(peek(0,which*4+2),peek(0,which*4));#endif  if (a->signature != SIGNATURE)    return 0;  if (a->version != VERSION)    return 0;  return a;}intdos_async_init(){  int i;  ASYNC_STRUCT far *a1;  ASYNC_STRUCT far *a2;  a1 = getivec(12);  a2 = getivec(11);  async = 0;  if (a1)    async = a1;  if (a2)    async = a2;  if (a1 && a2)  {    if (a1 < a2)      async = a1;    else      async = a2;  }  if (async == 0)  {    error("GDB can not connect to asynctsr program, check that it is installed\n\and that serial I/O is not being redirected (perhaps by NFS)\n\n\example configuration:\n\C> mode com2:9600,n,8,1,p\n\C> asynctsr 2\n\C> gdb \n");  }  iov = async->iov;  outportb(com_ier, 0x0f);  outportb(com_bfr, 0x03);  outportb(com_mcr, 0x0b);  async->getp = async->putp = async->buffer_start;  #if MONO  for (i=0; i<1200; i++)    ScreenSecondary[320+i] = 0x0720;#endif  if (iov > 0x300)    return 1;  else    return 2;}voiddos_async_tx(char c){  dprintf("dos_async_tx: enter %x - with IOV %x", c, com_lsr);  fflush(stdout);  while (~inportb(com_lsr) & 0x20);  outportb(com_tb, c);#if MONO  mono_put(c, mono_tx);#endif  dprintf("exit\n");}intdos_async_ready(){  return (async->getp != async->putp);}intdos_async_rx(){  char rv;  dprintf("dos_async_rx: enter - ");  fflush(stdout);  while (!dos_async_ready())   if (kbhit())   {     printf("abort!\n");     return 0;   }  dprintf("async=%x getp=%x\n", async, async->getp);  fflush(stdout);  rv = *aptr(async->getp++);#if MONO  mono_put(rv, mono_rx);#endif  if (async->getp >= async->buffer_end)   async->getp = async->buffer_start;  dprintf("exit %x\n", rv);  return rv;}intdos_kb_ready(){  return (peek(0x40,0x1a) != peek(0x40,0x1c));}intdos_kb_rx(){#ifdef __GNUC__  return getkey();#else  return getch();#endif}intdosasync_read (int fd, char *buffer, int length, int timeout){  long now, then;  int l = length;  time (&now);  then = now+timeout;  dprintf("dosasync_read: enter(%d,%d)\n", length, timeout);  while (l--)  {    if (timeout)    {      while (!dos_async_ready())      {        time (&now);        if (now == then)        {          dprintf("dosasync_read: timeout(%d)\n", length-l-1);          return length-l-1;        }      }    }    *buffer++ = dos_async_rx();  }  dprintf("dosasync_read: exit %d\n", length);  return length;}intdosasync_write(int fd, const char *buffer, int length){  int l = length;  while (l--)   dos_async_tx(*buffer++);  return length;}char *strlwr(char *s){  char *p = s;  while (*s)  {    if ((*s >= 'A') && (*s <= 'Z'))      *s += 'a'-'A';    s++;  }  return p;}sigsetmask(){}const char *serial_default_name (){  return "com1";}voidserial_raw (){  /* Always in raw mode */}intserial_open (name)      const char *name;{  fd = dos_async_init();  if (fd) return 1;  return 0;}intserial_readchar (to)      int to;{  char buf;  if (dosasync_read(fd, &buf, 1, to))      return buf;  else    return -2; /* Timeout, I guess */}intserial_setbaudrate (rate)      int rate;{  return 0;}intserial_nextbaudrate (rate)      int rate;{  return 0;}intserial_write (str, len)      const char *str;      int len;{  dosasync_write(fd, str, len);}intserial_close (){}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -