📄 iso_errno.h
字号:
#define E_CO_INV_PKT_D2 (CONL_ERROR_MASK | 0x1c) /* for state d2 */#define E_CO_INV_PKT_D3 (CONL_ERROR_MASK | 0x1d) /* for state d3 */ /* dot dot dot */#define E_CO_PKT_NOT_ALWD (CONL_ERROR_MASK | 0x20) /* packet not allowed */#define E_CO_PNA_UNIDENT (CONL_ERROR_MASK | 0x21) /* unidentifiable pkt */#define E_CO_PNA_ONEWAY (CONL_ERROR_MASK | 0x22) /* call on 1-way lc */#define E_CO_PNA_PVC (CONL_ERROR_MASK | 0x23) /* inv pkt type on a pvc */#define E_CO_PNA_UNASSLC (CONL_ERROR_MASK | 0x24) /* pkt on unassigned lc */#define E_CO_PNA_REJECT (CONL_ERROR_MASK | 0x25) /* REJ not subscribed to*/#define E_CO_PNA_SHORT (CONL_ERROR_MASK | 0x26) /* pkt too short */#define E_CO_PNA_LONG (CONL_ERROR_MASK | 0x27) /* pkt too long */#define E_CO_PNA_INVGFI (CONL_ERROR_MASK | 0x28) /* inv gen format id */#define E_CO_PNA_NZLCI (CONL_ERROR_MASK | 0x29) \ /* restart or reg pkt with nonzero logical channel identifier */#define E_CO_PNA_FACIL (CONL_ERROR_MASK | 0x2a) \ /* pkt type not compat with facility */#define E_CO_PNA_UINTCON (CONL_ERROR_MASK | 0x2b) /* unauthor intrpt conf */#define E_CO_PNA_UINTRPT (CONL_ERROR_MASK | 0x2c) /* unauthorized intrpt */#define E_CO_PNA_UREJECT (CONL_ERROR_MASK | 0x2d) /* unauthorized reject */#define E_CO_TMR_EXP (CONL_ERROR_MASK | 0x30) /* timer expired */#define E_CO_TMR_CALR (CONL_ERROR_MASK | 0x31) /* inc. call or call req */#define E_CO_TMR_CLRI (CONL_ERROR_MASK | 0x32) /* clear indication */#define E_CO_TMR_RSTI (CONL_ERROR_MASK | 0x33) /* reset indication */#define E_CO_TMR_RRTI (CONL_ERROR_MASK | 0x34) /* restart indication */#define E_CO_REG_PROB (CONL_ERROR_MASK | 0x40)\ /* call setup, clear, or registration problem */#define E_CO_REG_CODE (CONL_ERROR_MASK | 0x41) /* code not allowed */#define E_CO_REG_PARM (CONL_ERROR_MASK | 0x42) /* parameter not allowed */#define E_CO_REG_ICDA (CONL_ERROR_MASK | 0x43) /* invalid called addr */#define E_CO_REG_ICGA (CONL_ERROR_MASK | 0x44) /* invalid calling addr */#define E_CO_REG_ILEN (CONL_ERROR_MASK | 0x45) /* invalid facil length */#define E_CO_REG_IBAR (CONL_ERROR_MASK | 0x46) /* incoming call barred */#define E_CO_REG_NOLC (CONL_ERROR_MASK | 0x47) /* no logical chan avail*/#define E_CO_REG_COLL (CONL_ERROR_MASK | 0x48) /* call collision */#define E_CO_REG_DUPF (CONL_ERROR_MASK | 0x49) /* dupl facil requested */#define E_CO_REG_NZAL (CONL_ERROR_MASK | 0x4a) /* non-zero addr length */#define E_CO_REG_NZFL (CONL_ERROR_MASK | 0x4b) /* non-zero facil length */#define E_CO_REG_EFNP (CONL_ERROR_MASK | 0x4c) \ /* expected facil not provided */#define E_CO_REG_ICCITT (CONL_ERROR_MASK | 0x4d) \ /* invalid CCITT-specified DTE facil */#define E_CO_MISC (CONL_ERROR_MASK | 0x50) /* miscellaneous */#define E_CO_MISC_CAUSE (CONL_ERROR_MASK | 0x51) /* improper cause code */#define E_CO_MISC_ALIGN (CONL_ERROR_MASK | 0x52) /* not octet-aligned */#define E_CO_MISC_IQBS (CONL_ERROR_MASK | 0x53) \ /* inconsistent Q bit settings */#define E_CO_INTL (CONL_ERROR_MASK | 0x70) /* international problem */#define E_CO_IREMNWK (CONL_ERROR_MASK | 0x71) /* remote network problem */#define E_CO_INPROTO (CONL_ERROR_MASK | 0x72) /* int'l protocol problem */#define E_CO_ILINKDWN (CONL_ERROR_MASK | 0x73) /* int'l link down */#define E_CO_ILINKBSY (CONL_ERROR_MASK | 0x74) /* int'l link busy */#define E_CO_IXNETFAC (CONL_ERROR_MASK | 0x75) /* transit netwk facil */#define E_CO_IRNETFAC (CONL_ERROR_MASK | 0x76) /* remote netwk facil */#define E_CO_IROUTING (CONL_ERROR_MASK | 0x77) /* int'l routing prob */#define E_CO_ITMPRTG (CONL_ERROR_MASK | 0x78) /* temporary routing prob */#define E_CO_IUNKDNIC (CONL_ERROR_MASK | 0x79) /* unknown called DNIC */#define E_CO_IMAINT (CONL_ERROR_MASK | 0x7a) /* maintenance action */#define E_CO_TIMO (CONL_ERROR_MASK | 0x90) \ /* timer expired or retransmission count surpassed */#define E_CO_TIM_INTRP (CONL_ERROR_MASK | 0x91) /* for interrupt */#define E_CO_TIM_DATA (CONL_ERROR_MASK | 0x92) /* for data */#define E_CO_TIM_REJ (CONL_ERROR_MASK | 0x93) /* for reject */#define E_CO_DTE_SPEC (CONL_ERROR_MASK | 0xa0) /* DTE-specific */#define E_CO_DTE_OK (CONL_ERROR_MASK | 0xa1) /* DTE operational */#define E_CO_DTE_NOK (CONL_ERROR_MASK | 0xa2) /* DTE not operational */#define E_CO_DTE_RSRC (CONL_ERROR_MASK | 0xa3) /* DTE resource constraint*/#define E_CO_DTE_FSLCT (CONL_ERROR_MASK | 0xa4) /* fast select not subsc */#define E_CO_DTE_PFPKT (CONL_ERROR_MASK | 0xa5) /* partially full pkt */#define E_CO_DTE_DBIT (CONL_ERROR_MASK | 0xa6) /* D-bit proc not supp */#define E_CO_DTE_RCCON (CONL_ERROR_MASK | 0xa7) /* reg/canell confirmed */#define E_CO_OSI_NSP (CONL_ERROR_MASK | 0xe0) /* OSI net svc problem */#define E_CO_OSI_DISCT (CONL_ERROR_MASK | 0xe1) /* disconnect transient */#define E_CO_OSI_DISCP (CONL_ERROR_MASK | 0xe2) /* disconnect permanent */#define E_CO_OSI_REJT (CONL_ERROR_MASK | 0xe3) /* reject transient */#define E_CO_OSI_REJP (CONL_ERROR_MASK | 0xe4) /* reject permanent */#define E_CO_OSI_QOST (CONL_ERROR_MASK | 0xe5) /* reject QOS transient */#define E_CO_OSI_QOSP (CONL_ERROR_MASK | 0xe6) /* reject QOS permanent */#define E_CO_OSI_NSAPT (CONL_ERROR_MASK | 0xe7) /* NSAP unreach transient */#define E_CO_OSI_NSAPP (CONL_ERROR_MASK | 0xe8) /* NSAP unreach permanent */#define E_CO_OSI_RESET (CONL_ERROR_MASK | 0xe9) /* reset no reason */#define E_CO_OSI_CONGEST (CONL_ERROR_MASK | 0xea) /* reset congestion */#define E_CO_OSI_UNSAP (CONL_ERROR_MASK | 0xeb) /* unknown NSAP permanent */#define E_CO_HLI_INIT (CONL_ERROR_MASK | 0xf0) /* higher level initiated*/#define E_CO_HLI_DISCN (CONL_ERROR_MASK | 0xf1) /* disconnect normal */#define E_CO_HLI_DISCA (CONL_ERROR_MASK | 0xf2) /* disconnect abnormal */#define E_CO_HLI_DISCI (CONL_ERROR_MASK | 0xf3) /* disconnect incompatible*/#define E_CO_HLI_REJT (CONL_ERROR_MASK | 0xf4) /* reject transient */#define E_CO_HLI_REJP (CONL_ERROR_MASK | 0xf5) /* reject permanent */#define E_CO_HLI_QOST (CONL_ERROR_MASK | 0xf6) /* reject QOS transient */#define E_CO_HLI_QOSP (CONL_ERROR_MASK | 0xf7) /* reject QOS permanent */#define E_CO_HLI_REJI (CONL_ERROR_MASK | 0xf8) /* reject incompatible */#define E_CO_HLI_PROTOID (CONL_ERROR_MASK | 0xf9) /* unrecog proto id */#define E_CO_HLI_RESYNC (CONL_ERROR_MASK | 0xfa) /* reset - user resync *//* Cause on 8208 CLEAR field */#define E_CO_NUMBERBUSY (CONL_ERROR_MASK | 0x101) /* Number busy */#define E_CO_INVFACREQ (CONL_ERROR_MASK | 0x103) /* invalid facil req */#define E_CO_NETCONGEST (CONL_ERROR_MASK | 0x105) /* Network congestion */#define E_CO_OUTOFORDER (CONL_ERROR_MASK | 0x109) /* Out of order */#define E_CO_ACCESSBAR (CONL_ERROR_MASK | 0x10b) /* access barred */#define E_CO_NOTOBTAIN (CONL_ERROR_MASK | 0x10d) /* not obtainable */#define E_CO_REMPROCERR (CONL_ERROR_MASK | 0x111) /* Remote procedure err */#define E_CO_LOCPROCERR (CONL_ERROR_MASK | 0x113) /* Local procedure err */#define E_CO_RPOAOOO (CONL_ERROR_MASK | 0x115) /* RPOA out of order */#define E_CO_NOREVCHG (CONL_ERROR_MASK | 0x119) /* Revs chg not accepted*/#define E_CO_INCOMPAT (CONL_ERROR_MASK | 0x121) /* Incompatible dest */#define E_CO_NOFASTSEL (CONL_ERROR_MASK | 0x129) /* Fast select accpt not subscribed */#define E_CO_NOSHIP (CONL_ERROR_MASK | 0x139) /* ship absent */#define E_CO_GWPROCERR (CONL_ERROR_MASK | 0x1c1) /* Gateway-detected err*/#define E_CO_GWCONGEST (CONL_ERROR_MASK | 0x1c3) /* Gateway congestion*//* ARGO only */#define E_CO_QFULL (CONL_ERROR_MASK | 0x100) /* dropped packet - queue full*/#define E_CO_AIWP (CONL_ERROR_MASK | 0x102) /* addr incompat w/proto */#define E_CO_CHAN (CONL_ERROR_MASK | 0x104) /* bad channel number *//* ARGO only; driver specific */#define E_CO_NORESOURCES (CONL_ERROR_MASK | 0x1b0) /* eicon clogged */#define E_CO_PDNDOWN (CONL_ERROR_MASK | 0x1b1) /* physical net down */#define E_CO_DRVRCLRESET (CONL_ERROR_MASK | 0x1b2) /* driver clear/reset */#define E_CO_PDNCLRESET (CONL_ERROR_MASK | 0x1b3) /* PDN clear/reset */#define E_CO_DTECLRESET (CONL_ERROR_MASK | 0x1b4) /* board clear/reset */#define E_CO_UNKCLRESET (CONL_ERROR_MASK | 0x1b5) /* unexpected clr/rst */#define CONL_ERROR_MAX 0x1c3#endif /* __ISO_ERRNO__ */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -