grf_dv.c

早期freebsd实现

/*
 * Copyright (c) 1988 University of Utah.
 * Copyright (c) 1990, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * the Systems Programming Group of the University of Utah Computer
 * Science Department.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from: Utah $Hdr: grf_dv.c 1.12 93/08/13$
 *
 *	@(#)grf_dv.c	8.4 (Berkeley) 1/12/94
 */

#include "grf.h"
#if NGRF > 0

/*
 * Graphics routines for the DaVinci, HP98730/98731 Graphics system.
 */
#include <sys/param.h>
#include <sys/errno.h>

#include <hp/dev/grfioctl.h>
#include <hp/dev/grfvar.h>
#include <hp300/dev/grf_dvreg.h>

#include <machine/cpu.h>

/*
 * Initialize hardware.
 * Must point g_display at a grfinfo structure describing the hardware.
 * Returns 0 if hardware not present, non-zero ow.
 */
dv_init(gp, addr)
	struct grf_softc *gp;
	caddr_t addr;
{
	register struct dvboxfb *dbp;
	struct grfinfo *gi = &gp->g_display;
	int fboff;
	extern caddr_t sctopa(), iomap();

	dbp = (struct dvboxfb *) addr;
	if (ISIIOVA(addr))
		gi->gd_regaddr = (caddr_t) IIOP(addr);
	else
		gi->gd_regaddr = sctopa(vatosc(addr));
	gi->gd_regsize = 0x20000;
	gi->gd_fbwidth = (dbp->fbwmsb << 8) | dbp->fbwlsb;
	gi->gd_fbheight = (dbp->fbhmsb << 8) | dbp->fbhlsb;
	gi->gd_fbsize = gi->gd_fbwidth * gi->gd_fbheight;
	fboff = (dbp->fbomsb << 8) | dbp->fbolsb;
	gi->gd_fbaddr = (caddr_t) (*((u_char *)addr + fboff) << 16);
	if (gi->gd_regaddr >= (caddr_t)DIOIIBASE) {
		/*
		 * For DIO II space the fbaddr just computed is the offset
		 * from the select code base (regaddr) of the framebuffer.
		 * Hence it is also implicitly the size of the register set.
		 */
		gi->gd_regsize = (int) gi->gd_fbaddr;
		gi->gd_fbaddr += (int) gi->gd_regaddr;
		gp->g_regkva = addr;
		gp->g_fbkva = addr + gi->gd_regsize;
	} else {
		/*
		 * For DIO space we need to map the seperate framebuffer.
		 */
		gp->g_regkva = addr;
		gp->g_fbkva = iomap(gi->gd_fbaddr, gi->gd_fbsize);
	}
	gi->gd_dwidth = (dbp->dwmsb << 8) | dbp->dwlsb;
	gi->gd_dheight = (dbp->dwmsb << 8) | dbp->dwlsb;
	gi->gd_planes = 0;	/* ?? */
	gi->gd_colors = 256;

	dv_reset(dbp);
	return(1);
}

/*
 *  Magic code herein.
 */
dv_reset(dbp)
	register struct dvboxfb *dbp;
{
  	dbp->reset = 0x80;
	DELAY(100);

	dbp->interrupt = 0x04;
	dbp->en_scan   = 0x01;
	dbp->fbwen     = ~0;
	dbp->opwen     = ~0;
	dbp->fold      = 0x01;
	dbp->drive     = 0x01;
	dbp->rep_rule  = 0x33;
	dbp->alt_rr    = 0x33;
	dbp->zrr       = 0x33;

	dbp->fbvenp    = 0xFF;
	dbp->dispen    = 0x01;
	dbp->fbvens    = 0x0;
	dbp->fv_trig   = 0x01;
	DELAY(100);
	dbp->vdrive    = 0x0;
	dbp->zconfig   = 0x0;

	while (dbp->wbusy & 0x01)
	  DELAY(100);

	dbp->cmapbank = 0;

	dbp->red0   = 0;
	dbp->red1   = 0;
	dbp->green0 = 0;
	dbp->green1 = 0;
	dbp->blue0  = 0;
	dbp->blue1  = 0;

	dbp->panxh   = 0;
	dbp->panxl   = 0;
	dbp->panyh   = 0;
	dbp->panyl   = 0;
	dbp->zoom    = 0;
	dbp->cdwidth = 0x50;
	dbp->chstart = 0x52;
	dbp->cvwidth = 0x22;
	dbp->pz_trig = 1;
}

/*
 * Change the mode of the display.
 * Right now all we can do is grfon/grfoff.
 * Return a UNIX error number or 0 for success.
 */
dv_mode(gp, cmd, data)
	register struct grf_softc *gp;
	int cmd;
	caddr_t data;
{
	register struct dvboxfb *dbp;
	int error = 0;

	dbp = (struct dvboxfb *) gp->g_regkva;
	switch (cmd) {
	case GM_GRFON:
	  	dbp->dispen = 0x01;
	  	break;

	case GM_GRFOFF:
		break;

	case GM_GRFOVON:
		dbp->opwen = 0xF;
		dbp->drive = 0x10;
		break;

	case GM_GRFOVOFF:
		dbp->opwen = 0;
		dbp->drive = 0x01;
		break;

	/*
	 * Remember UVA of mapping for GCDESCRIBE.
	 * XXX this should be per-process.
	 */
	case GM_MAP:
		gp->g_data = data;
		break;

	case GM_UNMAP:
		gp->g_data = 0;
		break;

#ifdef HPUXCOMPAT
	case GM_DESCRIBE:
	{
		struct grf_fbinfo *fi = (struct grf_fbinfo *)data;
		struct grfinfo *gi = &gp->g_display;
		int i;

		/* feed it what HP-UX expects */
		fi->id = gi->gd_id;
		fi->mapsize = gi->gd_fbsize;
		fi->dwidth = gi->gd_dwidth;
		fi->dlength = gi->gd_dheight;
		fi->width = gi->gd_fbwidth;
		fi->length = gi->gd_fbheight;
		fi->bpp = NBBY;
		fi->xlen = (fi->width * fi->bpp) / NBBY;
		fi->npl = gi->gd_planes;
		fi->bppu = fi->npl;
		fi->nplbytes = fi->xlen * ((fi->length * fi->bpp) / NBBY);
		bcopy("HP98730", fi->name, 8);
		fi->attr = 2;	/* HW block mover */
		/*
		 * If mapped, return the UVA where mapped.
		 */
		if (gp->g_data) {
			fi->regbase = gp->g_data;
			fi->fbbase = fi->regbase + gp->g_display.gd_regsize;
		} else {
			fi->fbbase = 0;
			fi->regbase = 0;
		}
		for (i = 0; i < 6; i++)
			fi->regions[i] = 0;
		break;
	}
#endif

	default:
		error = EINVAL;
		break;
	}
	return(error);
}

#endif