📄 param.h
字号:
/* * Copyright (c) 1988 University of Utah. * Copyright (c) 1992 OMRON Corporation. * Copyright (c) 1982, 1986, 1990, 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: machparam.h 1.11 89/08/14$ * from: hp300/include/param.h 7.13 (Berkeley) 12/27/92 * * @(#)param.h 8.1 (Berkeley) 6/10/93 *//* * Machine dependent constants for LUNA taken from: * Param.h for HP9000 series 300. */#define MACHINE "luna68k"/* * Round p (pointer or byte index) up to a correctly-aligned value * for all data types (int, long, ...). The result is u_int and * must be cast to any desired pointer type. */#define ALIGNBYTES 3#define ALIGN(p) (((u_int)(p) + ALIGNBYTES) &~ ALIGNBYTES)#define NBPG 4096 /* bytes/page */#define PGOFSET (NBPG-1) /* byte offset into page */#define PGSHIFT 12 /* LOG2(NBPG) */#define NPTEPG (NBPG/(sizeof (struct pte)))#define NBSEG 0x400000 /* bytes/segment */#define SEGOFSET (NBSEG-1) /* byte offset into segment */#define SEGSHIFT 22 /* LOG2(NBSEG) */#define KERNBASE 0x00000000 /* start of kernel virtual */#define BTOPKERNBASE ((u_long)KERNBASE >> PGSHIFT)#define DEV_BSIZE 512#define DEV_BSHIFT 9 /* log2(DEV_BSIZE) */#define BLKDEV_IOSIZE 2048#define MAXPHYS (64 * 1024) /* max raw I/O transfer size */#define CLSIZE 1#define CLSIZELOG2 0/* NOTE: SSIZE, SINCR and UPAGES must be multiples of CLSIZE */#define SSIZE 1 /* initial stack size/NBPG */#define SINCR 1 /* increment of stack/NBPG */#define UPAGES 2 /* pages of u-area *//* * Constants related to network buffer management. * MCLBYTES must be no larger than CLBYTES (the software page size), and, * on machines that exchange pages of input or output buffers with mbuf * clusters (MAPPED_MBUFS), MCLBYTES must also be an integral multiple * of the hardware page size. */#define MSIZE 128 /* size of an mbuf */#define MCLBYTES 2048 /* large enough for ether MTU */#define MCLSHIFT 11#define MCLOFSET (MCLBYTES - 1)#ifndef NMBCLUSTERS#ifdef GATEWAY#define NMBCLUSTERS 512 /* map size, max cluster allocation */#else#define NMBCLUSTERS 256 /* map size, max cluster allocation */#endif#endif/* * Size of kernel malloc arena in CLBYTES-sized logical pages */ #ifndef NKMEMCLUSTERS#define NKMEMCLUSTERS (2048*1024/CLBYTES)#endif/* pages ("clicks") (4096 bytes) to disk blocks */#define ctod(x) ((x)<<(PGSHIFT-DEV_BSHIFT))#define dtoc(x) ((x)>>(PGSHIFT-DEV_BSHIFT))#define dtob(x) ((x)<<DEV_BSHIFT)/* pages to bytes */#define ctob(x) ((x)<<PGSHIFT)/* bytes to pages */#define btoc(x) (((unsigned)(x)+(NBPG-1))>>PGSHIFT)#define btodb(bytes) /* calculates (bytes / DEV_BSIZE) */ \ ((unsigned)(bytes) >> DEV_BSHIFT)#define dbtob(db) /* calculates (db * DEV_BSIZE) */ \ ((unsigned)(db) << DEV_BSHIFT)/* * Map a ``block device block'' to a file system block. * This should be device dependent, and should use the bsize * field from the disk label. * For now though just use DEV_BSIZE. */#define bdbtofsb(bn) ((bn) / (BLKDEV_IOSIZE/DEV_BSIZE))/* * Mach derived conversion macros */#define luna_round_page(x) ((((unsigned)(x)) + NBPG - 1) & ~(NBPG-1))#define luna_trunc_page(x) ((unsigned)(x) & ~(NBPG-1))#define luna_btop(x) ((unsigned)(x) >> PGSHIFT)#define luna_ptob(x) ((unsigned)(x) << PGSHIFT)/* * spl functions; all but spl0 are done in-line */#include <machine/psl.h>#define _spl(s) \({ \ register int _spl_r; \\ asm __volatile ("clrl %0; movew sr,%0; movew %1,sr" : \ "&=d" (_spl_r) : "di" (s)); \ _spl_r; \})/* spl0 requires checking for software interrupts */#define spl1() _spl(PSL_S|PSL_IPL1)#define spl2() _spl(PSL_S|PSL_IPL2)#define spl3() _spl(PSL_S|PSL_IPL3)#define spl4() _spl(PSL_S|PSL_IPL4)#define spl5() _spl(PSL_S|PSL_IPL5)#define spl6() _spl(PSL_S|PSL_IPL6)#define spl7() _spl(PSL_S|PSL_IPL7)#define splsoftclock() spl1()#define splnet() spl1()#define splbio() spl5()#define splimp() spl5()#define spltty() spl6()#define splclock() spl5()#define splstatclock() spl5()#define splvm() spl6()#define splhigh() spl7()#define splsched() spl7()/* watch out for side effects */#define splx(s) (s & PSL_IPL ? _spl(s) : spl0())#ifdef KERNEL#ifndef LOCOREint cpuspeed;#define DELAY(n) { register int N = cpuspeed * (n); while (--N > 0); }#endif#else#define DELAY(n) { register int N = (n); while (--N > 0); }#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -