⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 if_pclreg.h

📁 早期freebsd实现
💻 H
字号:
/* * Copyright (c) 1982, 1986 Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software *    must display the following acknowledgement: *	This product includes software developed by the University of *	California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors *    may be used to endorse or promote products derived from this software *    without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *	@(#)if_pclreg.h	7.3 (Berkeley) 6/28/90 *//* * DEC CSS PCL-11B Parallel Communications Interface */struct pcldevice  {	u_short	pcl_tcr;	/* Transmitter Command Register */	u_short	pcl_tsr;	/* Transmitter Status Register */	u_short	pcl_tsdb;	/* Transmitter Source Data Buffer */	short	pcl_tsbc;	/* Transmitter Source Byte Count */	u_short	pcl_tsba;	/* Transmitter Source Bus Address */	u_short	pcl_tmmr;	/* Transmitter Master/Maint Regs */	u_short	pcl_tscrc;	/* Transmitter Source CRC */	u_short	pcl_spare;	u_short	pcl_rcr;	/* Receiver Command Register */	u_short	pcl_rsr;	/* Receiver Status Register */	u_short	pcl_rddb;	/* Receiver Destination Data Buffer */	short	pcl_rdbc;	/* Receiver Destination Byte Count */	u_short	pcl_rdba;	/* Receiver Destination Bus Address */	u_short	pcl_rdcrc;	/* Receiver Destination CRC */};/* Transmitter Command and Status Bits */#define PCL_STTXM	(1<<0)		/* Start transmission */#define PCL_TXINIT	(1<<1)		/* Transmitter Initialize */#define PCL_IE		(1<<6)		/* Interrupt Enable */#define PCL_SNDWD	(1<<13)		/* Send word */#define PCL_TXNPR	(1<<14)		/* Transmitter NPR */#define PCL_RIB		(1<<15)		/* Retry if busy */#define PCL_RESPA	(3<<0)		/* Response A bits (tsr & rsr) */#define PCL_RESPB	(3<<2)		/* Response B bits (tsr & rsr) */#define PCL_MSTDWN	(1<<11)		/* Master down */#define PCL_ERR		(1<<15)		/* Error summary */#define PCL_MASTER	(1<<8)		/* Set MASTER status */#define PCL_AUTOADDR	(1<<12)		/* Auto time slicing *//* Receiver Command and Status Bits */#define PCL_RCVDAT	(1<<0)		/* Receive data */#define PCL_RCINIT	(1<<1)		/* Receiver Initialize */#define PCL_RCVWD	(1<<13)		/* Receive word */#define PCL_RCNPR	(1<<14)		/* Receive NRP */#define PCL_REJ		(1<<15)		/* Reject transmission */#define PCL_BCOFL	(1<<9)		/* Byte Counter Overflow */#define PCL_TERRBITS	"\20\20ERR\17NXL\16MEM_OFL\15TXM_ERR\14MST_DWN\13TIM_OUT\12OVERRUN\11DTI_RDY\10SUC_TXF\07BUSY\06SOREJ\05TBS_BUSY"#define PCL_TCSRBITS	"\20\20RIB\17TX_NPR\16SND_WD\10RD_SILO\07IE\04DTO_RDY\03INH_ADI\02TX_INIT\01START_TXM"#define PCL_RERRBITS	"\20\20ERR\17NXL\16MEM_OFL\15TXM_ERR\14PARITY\13TIM_OUT\12BC_OFL\11DTO_RDY\10SUC_TXF\07BUSY\06REJ_COMP\05CHN_OPN"#define PCL_RCSRBITS	"\20\20REJ\17RC_NPR\16RCV_WD\10LD_SILO\07IE\04DTI_RDY\03INH_ADI\02RC_INIT\01RCV_DAT"

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -