📄 qvreg.h
字号:
/*- * Copyright (c) 1982, 1986 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)qvreg.h 7.1 (Berkeley) 5/9/91 *//* * derived from: @(#)qvreg.h 1.3 (ULTRIX) 8/21/85 *//* * QVSS definitions. */struct qvdevice { unsigned short qv_csr; /* csr */ unsigned short qv_xcur; /* cursor x-position */ unsigned short qv_mouse; /* mouse position */ unsigned short qv_spare1; unsigned short qv_crtaddr; /* crt controller address reg */ unsigned short qv_crtdata; /* crt controller data register */ unsigned short qv_intdata; /* int controller data register */ unsigned short qv_intcsr; /* int controller command/status*/ unsigned short qv_dummy[8]; unsigned short qv_uartmode; /* uart mode */ unsigned short qv_uartstatus; /* uart status */ unsigned short qv_uartcmd; /* uart command */ unsigned short qv_uartdata; /* uart data */ unsigned short qv_spare2; unsigned short qv_uartintstatus; /* uart interrupt status */};/* * csr bit definations */#define QV_19INCH 0x1#define QV_VIDEO_ENA 0x4#define QV_CUR_MODE 0x8#define QV_VIDEO_LP 0x10#define QV_TEST_BIT 0x20#define QV_INT_ENABLE 0x40#define QV_CURSOR_ON 0x80#define QV_MOUSE_ANY 0x700#define QV_MOUSE_A 0x100#define QV_MOUSE_B 0x200#define QV_MOUSE_C 0x400#define QV_MEM_BANK 0x7800/* * Lk201 keyboard */#define LK_UPDOWN 0x86 /* bits for setting lk201 modes */#define LK_AUTODOWN 0x82#define LK_DOWN 0x80#define LK_DEFAULTS 0xd3 /* reset (some) default settings */#define LK_AR_ENABLE 0xe3 /* global auto repeat enable */#define LK_CL_ENABLE 0x1b /* keyclick enable */#define LK_KBD_ENABLE 0x8b /* keyboard enable */#define LK_BELL_ENABLE 0x23 /* the bell */#define LK_LED_ENABLE 0x13 /* light led */#define LK_LED_DISABLE 0x11 /* turn off led */#define LK_RING_BELL 0xa7 /* ring keyboard bell */#define LED_1 0x81 /* led bits */#define LED_2 0x82#define LED_3 0x84#define LED_4 0x88#define LED_ALL 0x8f#define LK_KDOWN_ERROR 0x3d /* key down on powerup error */#define LK_POWER_ERROR 0x3e /* keyboard failure on powerup test */#define LK_OUTPUT_ERROR 0xb5 /* keystrokes lost during inhibit */#define LK_INPUT_ERROR 0xb6 /* garbage command to keyboard */#define LK_LOWEST 0x56 /* lowest significant keycode */#define LK_DIV6_START 0xad /* start of div 6 */#define LK_DIV5_END 0xb2 /* end of div 5 *//* * Keycodes for special keys and functions */#define SHIFT 0xae#define LOCK 0xb0#define REPEAT 0xb4#define CNTRL 0xaf#define ALLUP 0xb3
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -