📄 itevar.h
字号:
/* * Copyright (c) 1988 University of Utah. * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: itevar.h 1.15 92/12/20$ * * @(#)itevar.h 8.1 (Berkeley) 6/10/93 */#define UNIT(dev) minor(dev)struct itesw { int ite_hwid; /* Hardware id */ int (*ite_init)(); int (*ite_deinit)(); int (*ite_clear)(); int (*ite_putc)(); int (*ite_cursor)(); int (*ite_scroll)(); u_char (*ite_readbyte)(); int (*ite_writeglyph)();};#define getbyte(ip, offset) \ ((*(ip)->isw->ite_readbyte)(ip, offset))#define getword(ip, offset) \ ((getbyte(ip, offset) << 8) | getbyte(ip, (offset) + 2))#define writeglyph(ip, offset, fontbuf) \ ((*(ip)->isw->ite_writeglyph)((ip), (offset), (fontbuf)))struct ite_softc { int flags; struct itesw *isw; struct grf_softc *grf; caddr_t regbase, fbbase; short curx, cury; short cursorx, cursory; short cblankx, cblanky; short rows, cols; short cpl; short dheight, dwidth; short fbheight, fbwidth; short ftheight, ftwidth; short fontx, fonty; short attribute; u_char *attrbuf; short planemask; short pos; char imode, escape, fpd, hold; caddr_t devdata; /* display dependent data */};/* Flags */#define ITE_ALIVE 0x01 /* hardware exists */#define ITE_INITED 0x02 /* device has been initialized */#define ITE_CONSOLE 0x04 /* device can be console */#define ITE_ISCONS 0x08 /* device is console */#define ITE_ACTIVE 0x10 /* device is being used as ITE */#define ITE_INGRF 0x20 /* device in use as non-ITE */#define ITE_CURSORON 0x40 /* cursor being tracked */#define attrloc(ip, y, x) \ (ip->attrbuf + ((y) * ip->cols) + (x))#define attrclr(ip, sy, sx, h, w) \ bzero(ip->attrbuf + ((sy) * ip->cols) + (sx), (h) * (w)) #define attrmov(ip, sy, sx, dy, dx, h, w) \ bcopy(ip->attrbuf + ((sy) * ip->cols) + (sx), \ ip->attrbuf + ((dy) * ip->cols) + (dx), \ (h) * (w))#define attrtest(ip, attr) \ ((* (u_char *) attrloc(ip, ip->cury, ip->curx)) & attr)#define attrset(ip, attr) \ ((* (u_char *) attrloc(ip, ip->cury, ip->curx)) = attr) /* * X and Y location of character 'c' in the framebuffer, in pixels. */#define charX(ip,c) \ (((c) % (ip)->cpl) * (ip)->ftwidth + (ip)->fontx)#define charY(ip,c) \ (((c) / (ip)->cpl) * (ip)->ftheight + (ip)->fonty)/* * The cursor is just an inverted space. */#define draw_cursor(ip) { \ WINDOWMOVER(ip, ip->cblanky, ip->cblankx, \ ip->cury * ip->ftheight, \ ip->curx * ip->ftwidth, \ ip->ftheight, ip->ftwidth, RR_XOR); \ ip->cursorx = ip->curx; \ ip->cursory = ip->cury; }#define erase_cursor(ip) \ WINDOWMOVER(ip, ip->cblanky, ip->cblankx, \ ip->cursory * ip->ftheight, \ ip->cursorx * ip->ftwidth, \ ip->ftheight, ip->ftwidth, RR_XOR);/* Character attributes */#define ATTR_NOR 0x0 /* normal */#define ATTR_INV 0x1 /* inverse */#define ATTR_UL 0x2 /* underline */#define ATTR_ALL (ATTR_INV | ATTR_UL)/* Keyboard attributes */#define ATTR_KPAD 0x4 /* keypad transmit */ /* Replacement Rules */#define RR_CLEAR 0x0#define RR_COPY 0x3#define RR_XOR 0x6#define RR_COPYINVERTED 0xc#define SCROLL_UP 0x01#define SCROLL_DOWN 0x02#define SCROLL_LEFT 0x03#define SCROLL_RIGHT 0x04#define DRAW_CURSOR 0x05#define ERASE_CURSOR 0x06#define MOVE_CURSOR 0x07#define KBD_SSHIFT 4 /* bits to shift status */#define KBD_CHARMASK 0x7F/* keyboard status */#define KBD_SMASK 0xF /* service request status mask */#define KBD_CTRLSHIFT 0x8 /* key + CTRL + SHIFT */#define KBD_CTRL 0x9 /* key + CTRL */#define KBD_SHIFT 0xA /* key + SHIFT */#define KBD_KEY 0xB /* key only */#define KBD_CAPSLOCK 0x18#define KBD_EXT_LEFT_DOWN 0x12#define KBD_EXT_LEFT_UP 0x92#define KBD_EXT_RIGHT_DOWN 0x13#define KBD_EXT_RIGHT_UP 0x93#define TABSIZE 8#define TABEND(u) (ite_tty[u].t_winsize.ws_col - TABSIZE)#ifdef KERNELextern struct ite_softc ite_softc[];extern struct itesw itesw[];extern int nitesw;#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -