strtod.c

早期freebsd实现

/*-
 * Copyright (c) 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#if defined(LIBC_SCCS) && !defined(lint)
static char sccsid[] = "@(#)strtod.c	8.1 (Berkeley) 6/4/93";
#endif /* LIBC_SCCS and not lint */

/****************************************************************
 *
 * The author of this software is David M. Gay.
 *
 * Copyright (c) 1991 by AT&T.
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose without fee is hereby granted, provided that this entire notice
 * is included in all copies of any software which is or includes a copy
 * or modification of this software and in all copies of the supporting
 * documentation for such software.
 *
 * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
 * WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY
 * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
 * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
 *
 ***************************************************************/

/* Please send bug reports to
	David M. Gay
	AT&T Bell Laboratories, Room 2C-463
	600 Mountain Avenue
	Murray Hill, NJ 07974-2070
	U.S.A.
	[e-mail] or research!dmg
 */

/* strtod for IEEE-, VAX-, and IBM-arithmetic machines.
 *
 * This strtod returns a nearest machine number to the input decimal
 * string (or sets errno to ERANGE).  With IEEE arithmetic, ties are
 * broken by the IEEE round-even rule.  Otherwise ties are broken by
 * biased rounding (add half and chop).
 *
 * Inspired loosely by William D. Clinger's paper "How to Read Floating
 * Point Numbers Accurately" [Proc. ACM SIGPLAN '90, pp. 92-101].
 *
 * Modifications:
 *
 *	1. We only require IEEE, IBM, or VAX double-precision
 *		arithmetic (not IEEE double-extended).
 *	2. We get by with floating-point arithmetic in a case that
 *		Clinger missed -- when we're computing d * 10^n
 *		for a small integer d and the integer n is not too
 *		much larger than 22 (the maximum integer k for which
 *		we can represent 10^k exactly), we may be able to
 *		compute (d*10^k) * 10^(e-k) with just one roundoff.
 *	3. Rather than a bit-at-a-time adjustment of the binary
 *		result in the hard case, we use floating-point
 *		arithmetic to determine the adjustment to within
 *		one bit; only in really hard cases do we need to
 *		compute a second residual.
 *	4. Because of 3., we don't need a large table of powers of 10
 *		for ten-to-e (just some small tables, e.g. of 10^k
 *		for 0 <= k <= 22).
 */

/*
 * #define IEEE_8087 for IEEE-arithmetic machines where the least
 *	significant byte has the lowest address.
 * #define IEEE_MC68k for IEEE-arithmetic machines where the most
 *	significant byte has the lowest address.
 * #define Sudden_Underflow for IEEE-format machines without gradual
 *	underflow (i.e., that flush to zero on underflow).
 * #define IBM for IBM mainframe-style floating-point arithmetic.
 * #define VAX for VAX-style floating-point arithmetic.
 * #define Unsigned_Shifts if >> does treats its left operand as unsigned.
 * #define No_leftright to omit left-right logic in fast floating-point
 *	computation of dtoa.
 * #define Check_FLT_ROUNDS if FLT_ROUNDS can assume the values 2 or 3.
 * #define RND_PRODQUOT to use rnd_prod and rnd_quot (assembly routines
 *	that use extended-precision instructions to compute rounded
 *	products and quotients) with IBM.
 * #define ROUND_BIASED for IEEE-format with biased rounding.
 * #define Inaccurate_Divide for IEEE-format with correctly rounded
 *	products but inaccurate quotients, e.g., for Intel i860.
 * #define Just_16 to store 16 bits per 32-bit long when doing high-precision
 *	integer arithmetic.  Whether this speeds things up or slows things
 *	down depends on the machine and the number being converted.
 * #define KR_headers for old-style C function headers.
 * #define Bad_float_h if your system lacks a float.h or if it does not
 *	define some or all of DBL_DIG, DBL_MAX_10_EXP, DBL_MAX_EXP,
 *	FLT_RADIX, FLT_ROUNDS, and DBL_MAX.
 */

#if defined(i386) || defined(mips) && defined(MIPSEL)
#define IEEE_8087
#else
#define IEEE_MC68k
#endif

#ifdef DEBUG
#include "stdio.h"
#define Bug(x) {fprintf(stderr, "%s\n", x); exit(1);}
#endif

#ifdef __cplusplus
#include "malloc.h"
#include "memory.h"
#else
#ifndef KR_headers
#include "stdlib.h"
#include "string.h"
#else
#include "malloc.h"
#include "memory.h"
#endif
#endif

#include "errno.h"
#ifdef Bad_float_h
#undef __STDC__
#ifdef IEEE_MC68k
#define IEEE_ARITHMETIC
#endif
#ifdef IEEE_8087
#define IEEE_ARITHMETIC
#endif
#ifdef IEEE_ARITHMETIC
#define DBL_DIG 15
#define DBL_MAX_10_EXP 308
#define DBL_MAX_EXP 1024
#define FLT_RADIX 2
#define FLT_ROUNDS 1
#define DBL_MAX 1.7976931348623157e+308
#endif

#ifdef IBM
#define DBL_DIG 16
#define DBL_MAX_10_EXP 75
#define DBL_MAX_EXP 63
#define FLT_RADIX 16
#define FLT_ROUNDS 0
#define DBL_MAX 7.2370055773322621e+75
#endif

#ifdef VAX
#define DBL_DIG 16
#define DBL_MAX_10_EXP 38
#define DBL_MAX_EXP 127
#define FLT_RADIX 2
#define FLT_ROUNDS 1
#define DBL_MAX 1.7014118346046923e+38
#endif

#ifndef LONG_MAX
#define LONG_MAX 2147483647
#endif
#else
#include "float.h"
#endif
#ifndef __MATH_H__
#include "math.h"
#endif

#ifdef __cplusplus
extern "C" {
#endif

#ifndef CONST
#ifdef KR_headers
#define CONST /* blank */
#else
#define CONST const
#endif
#endif

#ifdef Unsigned_Shifts
#define Sign_Extend(a,b) if (b < 0) a |= 0xffff0000;
#else
#define Sign_Extend(a,b) /*no-op*/
#endif

#if defined(IEEE_8087) + defined(IEEE_MC68k) + defined(VAX) + defined(IBM) != 1
Exactly one of IEEE_8087, IEEE_MC68k, VAX, or IBM should be defined.
#endif

#ifdef IEEE_8087
#define word0(x) ((unsigned long *)&x)[1]
#define word1(x) ((unsigned long *)&x)[0]
#else
#define word0(x) ((unsigned long *)&x)[0]
#define word1(x) ((unsigned long *)&x)[1]
#endif

/* The following definition of Storeinc is appropriate for MIPS processors.
 * An alternative that might be better on some machines is
 * #define Storeinc(a,b,c) (*a++ = b << 16 | c & 0xffff)
 */
#if defined(IEEE_8087) + defined(VAX)
#define Storeinc(a,b,c) (((unsigned short *)a)[1] = (unsigned short)b, \
((unsigned short *)a)[0] = (unsigned short)c, a++)
#else
#define Storeinc(a,b,c) (((unsigned short *)a)[0] = (unsigned short)b, \
((unsigned short *)a)[1] = (unsigned short)c, a++)
#endif

/* #define P DBL_MANT_DIG */
/* Ten_pmax = floor(P*log(2)/log(5)) */
/* Bletch = (highest power of 2 < DBL_MAX_10_EXP) / 16 */
/* Quick_max = floor((P-1)*log(FLT_RADIX)/log(10) - 1) */
/* Int_max = floor(P*log(FLT_RADIX)/log(10) - 1) */

#if defined(IEEE_8087) + defined(IEEE_MC68k)
#define Exp_shift  20
#define Exp_shift1 20
#define Exp_msk1    0x100000
#define Exp_msk11   0x100000
#define Exp_mask  0x7ff00000
#define P 53
#define Bias 1023
#define IEEE_Arith
#define Emin (-1022)
#define Exp_1  0x3ff00000
#define Exp_11 0x3ff00000
#define Ebits 11
#define Frac_mask  0xfffff
#define Frac_mask1 0xfffff
#define Ten_pmax 22
#define Bletch 0x10
#define Bndry_mask  0xfffff
#define Bndry_mask1 0xfffff
#define LSB 1
#define Sign_bit 0x80000000
#define Log2P 1
#define Tiny0 0
#define Tiny1 1
#define Quick_max 14
#define Int_max 14
#define Infinite(x) (word0(x) == 0x7ff00000) /* sufficient test for here */
#else
#undef  Sudden_Underflow
#define Sudden_Underflow
#ifdef IBM
#define Exp_shift  24
#define Exp_shift1 24
#define Exp_msk1   0x1000000
#define Exp_msk11  0x1000000
#define Exp_mask  0x7f000000
#define P 14
#define Bias 65
#define Exp_1  0x41000000
#define Exp_11 0x41000000
#define Ebits 8	/* exponent has 7 bits, but 8 is the right value in b2d */
#define Frac_mask  0xffffff
#define Frac_mask1 0xffffff
#define Bletch 4
#define Ten_pmax 22
#define Bndry_mask  0xefffff
#define Bndry_mask1 0xffffff
#define LSB 1
#define Sign_bit 0x80000000
#define Log2P 4
#define Tiny0 0x100000
#define Tiny1 0
#define Quick_max 14
#define Int_max 15
#else /* VAX */
#define Exp_shift  23
#define Exp_shift1 7
#define Exp_msk1    0x80
#define Exp_msk11   0x800000
#define Exp_mask  0x7f80
#define P 56
#define Bias 129
#define Exp_1  0x40800000
#define Exp_11 0x4080
#define Ebits 8
#define Frac_mask  0x7fffff
#define Frac_mask1 0xffff007f
#define Ten_pmax 24
#define Bletch 2
#define Bndry_mask  0xffff007f
#define Bndry_mask1 0xffff007f
#define LSB 0x10000
#define Sign_bit 0x8000
#define Log2P 1
#define Tiny0 0x80
#define Tiny1 0
#define Quick_max 15
#define Int_max 15
#endif
#endif

#ifndef IEEE_Arith
#define ROUND_BIASED
#endif

#ifdef RND_PRODQUOT
#define rounded_product(a,b) a = rnd_prod(a, b)
#define rounded_quotient(a,b) a = rnd_quot(a, b)
#ifdef KR_headers
extern double rnd_prod(), rnd_quot();
#else
extern double rnd_prod(double, double), rnd_quot(double, double);
#endif
#else
#define rounded_product(a,b) a *= b
#define rounded_quotient(a,b) a /= b
#endif

#define Big0 (Frac_mask1 | Exp_msk1*(DBL_MAX_EXP+Bias-1))
#define Big1 0xffffffff

#ifndef Just_16
/* When Pack_32 is not defined, we store 16 bits per 32-bit long.
 * This makes some inner loops simpler and sometimes saves work
 * during multiplications, but it often seems to make things slightly
 * slower.  Hence the default is now to store 32 bits per long.
 */
#ifndef Pack_32
#define Pack_32
#endif
#endif

#define Kmax 15

#ifdef __cplusplus
extern "C" double strtod(const char *s00, char **se);
extern "C" char *dtoa(double d, int mode, int ndigits,
			int *decpt, int *sign, char **rve);
#endif

 struct
Bigint {
	struct Bigint *next;
	int k, maxwds, sign, wds;
	unsigned long x[1];
};

 typedef struct Bigint Bigint;

 static Bigint *freelist[Kmax+1];

 static Bigint *
Balloc
#ifdef KR_headers
	(k) int k;
#else
	(int k)
#endif
{
	int x;
	Bigint *rv;

	if (rv = freelist[k]) {
		freelist[k] = rv->next;
	} else {
		x = 1 << k;
		rv = (Bigint *)malloc(sizeof(Bigint) + (x-1)*sizeof(long));
		rv->k = k;
		rv->maxwds = x;
	}
	rv->sign = rv->wds = 0;
	return rv;
}

 static void
Bfree
#ifdef KR_headers
	(v) Bigint *v;
#else
	(Bigint *v)
#endif
{
	if (v) {
		v->next = freelist[v->k];
		freelist[v->k] = v;
	}
}

#define Bcopy(x,y) memcpy((char *)&x->sign, (char *)&y->sign, \
y->wds*sizeof(long) + 2*sizeof(int))

 static Bigint *
multadd
#ifdef KR_headers
	(b, m, a) Bigint *b; int m, a;
#else
	(Bigint *b, int m, int a)	/* multiply by m and add a */
#endif
{
	int i, wds;
	unsigned long *x, y;
#ifdef Pack_32
	unsigned long xi, z;
#endif
	Bigint *b1;

	wds = b->wds;
	x = b->x;
	i = 0;
	do {
#ifdef Pack_32
		xi = *x;
		y = (xi & 0xffff) * m + a;
		z = (xi >> 16) * m + (y >> 16);
		a = (int)(z >> 16);
		*x++ = (z << 16) + (y & 0xffff);
#else
		y = *x * m + a;
		a = (int)(y >> 16);
		*x++ = y & 0xffff;
#endif
	} while (++i < wds);
	if (a) {
		if (wds >= b->maxwds) {
			b1 = Balloc(b->k+1);
			Bcopy(b1, b);
			Bfree(b);
			b = b1;
			}
		b->x[wds++] = a;
		b->wds = wds;
	}
	return b;
}

 static Bigint *
s2b
#ifdef KR_headers
	(s, nd0, nd, y9) CONST char *s; int nd0, nd; unsigned long y9;
#else
	(CONST char *s, int nd0, int nd, unsigned long y9)
#endif
{
	Bigint *b;
	int i, k;
	long x, y;

	x = (nd + 8) / 9;
	for (k = 0, y = 1; x > y; y <<= 1, k++) ;
#ifdef Pack_32
	b = Balloc(k);
	b->x[0] = y9;
	b->wds = 1;
#else
	b = Balloc(k+1);
	b->x[0] = y9 & 0xffff;
	b->wds = (b->x[1] = y9 >> 16) ? 2 : 1;
#endif

	i = 9;
	if (9 < nd0) {
		s += 9;
		do
			b = multadd(b, 10, *s++ - '0');
		while (++i < nd0);
		s++;
	} else
		s += 10;
	for (; i < nd; i++)
		b = multadd(b, 10, *s++ - '0');
	return b;
}

 static int
hi0bits
#ifdef KR_headers
	(x) register unsigned long x;
#else
	(register unsigned long x)
#endif
{
	register int k = 0;

	if (!(x & 0xffff0000)) {
		k = 16;
		x <<= 16;
	}
	if (!(x & 0xff000000)) {
		k += 8;
		x <<= 8;
	}
	if (!(x & 0xf0000000)) {
		k += 4;
		x <<= 4;
	}
	if (!(x & 0xc0000000)) {
		k += 2;
		x <<= 2;
	}
	if (!(x & 0x80000000)) {
		k++;
		if (!(x & 0x40000000))
			return 32;
	}
	return k;
}

 static int
lo0bits
#ifdef KR_headers
	(y) unsigned long *y;
#else
	(unsigned long *y)
#endif
{
	register int k;
	register unsigned long x = *y;

	if (x & 7) {
		if (x & 1)
			return 0;
		if (x & 2) {
			*y = x >> 1;
			return 1;
		}
		*y = x >> 2;
		return 2;
	}
	k = 0;
	if (!(x & 0xffff)) {
		k = 16;
		x >>= 16;
	}
	if (!(x & 0xff)) {
		k += 8;
		x >>= 8;
	}
	if (!(x & 0xf)) {
		k += 4;
		x >>= 4;
	}
	if (!(x & 0x3)) {
		k += 2;
		x >>= 2;
	}
	if (!(x & 1)) {
		k++;
		x >>= 1;
		if (!x & 1)
			return 32;
	}
	*y = x;
	return k;
}

 static Bigint *
i2b
#ifdef KR_headers
	(i) int i;
#else
	(int i)
#endif
{
	Bigint *b;

	b = Balloc(1);
	b->x[0] = i;
	b->wds = 1;
	return b;
	}

 static Bigint *
mult
#ifdef KR_headers
	(a, b) Bigint *a, *b;
#else
	(Bigint *a, Bigint *b)
#endif
{
	Bigint *c;
	int k, wa, wb, wc;
	unsigned long carry, y, z;
	unsigned long *x, *xa, *xae, *xb, *xbe, *xc, *xc0;
#ifdef Pack_32
	unsigned long z2;
#endif

	if (a->wds < b->wds) {
		c = a;
		a = b;
		b = c;