onewiresensor.java

这是一个以JAVA编写的程序,本人还没有试过,是一个简单的温度控制系统

/*---------------------------------------------------------------------------
 * Copyright (C) 1999,2000 Dallas Semiconductor Corporation, All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY,  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 * IN NO EVENT SHALL DALLAS SEMICONDUCTOR BE LIABLE FOR ANY CLAIM, DAMAGES
 * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 *
 * Except as contained in this notice, the name of Dallas Semiconductor
 * shall not be used except as stated in the Dallas Semiconductor
 * Branding Policy.
 *---------------------------------------------------------------------------
 */

package com.dalsemi.onewire.container;

// imports
import com.dalsemi.onewire.OneWireException;
import com.dalsemi.onewire.adapter.OneWireIOException;


/**
 * <P>1-Wire sensor interface class for basic sensor operations. </P>
 *
 * <P> Typically the operations of 1-Wire Sensors are memory mapped so
 * writing to a particular location causes the state to change.  To
 * accommodate this type of architecture and reduce the number of 1-
 * Wire operations that need to take place, a 'read-modify-write'
 * technique is used.  Each Sensor interface is derived from this
 * super-interface that contain just two methods: 
 * {@link #readDevice() readDevice}, 
 * {@link #writeDevice(byte[]) writeDevice}.  The
 * read returns a byte array and the write takes a byte array.  The
 * byte array is the state of the device.  The interfaces that
 * extend this interface have 'get' and 'set' methods that
 * manipulate the byte array.  So a OneWireSensor operation is: </P>
 *           
 * <OL>
 *    <LI> state = readDevice()
 *    <LI> 'get' and 'set' methods on state
 *    <LI> writeDevice(state)
 * </OL>
 * 
 * <H3> Usage </H3> 
 *  
 * <DL> 
 * <DD> <H4> Example 1</H4> 
 * Read the sensed level of a 
 *    {@link com.dalsemi.onewire.container.SwitchContainer SwitchContainer} instance 'sw': 
 * <PRE> <CODE>
 *  byte[] state = sw.readDevice();
 *  if (sw.hasLevelSensing())
 *  {
 *     for (int ch = 0; ch < sw.getNumberChannels(state); ch++)
 *     {
 *        System.out.print("Level for channel " + ch + " is : ");
 *        if (sw.getLevel(ch, state))
 *           System.out.println("HIGH");
 *        else
 *           System.out.println("HIGH");
 *     }
 *  }
 *  else
 *      System.out.println("This SwitchContainer can not sense level");
 * </CODE> </PRE>
 * 
 * <DD> <H4> Example 2</H4> 
 * Set the clock of a 
 *    {@link com.dalsemi.onewire.container.ClockContainer ClockContainer} instance 'cl': 
 * <PRE> <CODE>
 *  byte[] state = cl.readDevice();
 *  cl.setClock((new Date().getTime()), state);
 *  cl.setClockRunEnable(true, state);
 *  cl.writeDevice(state);
 * </CODE> </PRE>
 * </DL>
 *
 * @see com.dalsemi.onewire.container.ADContainer
 * @see com.dalsemi.onewire.container.ClockContainer
 * @see com.dalsemi.onewire.container.PotentiometerContainer
 * @see com.dalsemi.onewire.container.SwitchContainer
 * @see com.dalsemi.onewire.container.TemperatureContainer
 *
 * @version    0.00, 28 Aug 2000
 * @author     DS
 */
public interface OneWireSensor
{

   //--------
   //-------- Sensor I/O methods
   //--------

   /**
    * Retrieves the 1-Wire device sensor state.  This state is
    * returned as a byte array.  Pass this byte array to the 'get'
    * and 'set' methods.  If the device state needs to be changed then call
    * the 'writeDevice' to finalize the changes.
    *
    * @return 1-Wire device sensor state    
    *
    * @throws OneWireIOException on a 1-Wire communication error such as 
    *         reading an incorrect CRC from a 1-Wire device.  This could be
    *         caused by a physical interruption in the 1-Wire Network due to 
    *         shorts or a newly arriving 1-Wire device issuing a 'presence pulse'.
    * @throws OneWireException on a communication or setup error with the 1-Wire 
    *         adapter
    */
   public byte[] readDevice ()
      throws OneWireIOException, OneWireException;

   /**
    * Writes the 1-Wire device sensor state that
    * have been changed by 'set' methods.  Only the state registers that
    * changed are updated.  This is done by referencing a field information
    * appended to the state data.
    *
    * @param  state 1-Wire device sensor state
    *
    * @throws OneWireIOException on a 1-Wire communication error such as 
    *         reading an incorrect CRC from a 1-Wire device.  This could be
    *         caused by a physical interruption in the 1-Wire Network due to 
    *         shorts or a newly arriving 1-Wire device issuing a 'presence pulse'.
    * @throws OneWireException on a communication or setup error with the 1-Wire 
    *         adapter
    */
   public void writeDevice (byte[] state)
      throws OneWireIOException, OneWireException;
}