edit.txt

这是我做的一个简单的课程设计 这是一个简单的文本编辑器,利用调用BOSE的6号 9号等功能 实现简单的文本编辑

Edit Controls
-------------------------------------------------------------------------------
By Bill
March 14, 1999


Introduction:
-------------------------------------------------------------------------------
A control is a child window an application uses in with another window to 
perform simple input and output tasks. Controls are most often used within
dialog boxes, but they can also be used in other windows. An edit control is a 
rectangular control window typically used in a dialog box to permit the user 
to enter and edit text from the keyboard. 

This article will show how to easily create a simple text editor by using an 
edit control.  The control itself provides most of the needed functionality,
and only a small amount of actual code is needed.

In order make sure the common controls library is loaded, so that you can use
them, you should call the InitCommonControls function.

An edit control can send notification messages to its parent window in the 
form of WM_COMMAND messages. A parent window can send messages to an edit 
control in a dialog box by calling the SendDlgItemMessage function.


Files and Tools:
-------------------------------------------------------------------------------
Here are some things you will need to use this tutorial....
     MASM (Get the MASM32 package)
     Borlands MAKE (if you wish to use my makefile)
     Borlands BRCC32 (i dont know why, but i still use borland resource compiler)
     Borlands H2ASH (not really necessary... easy way to convert .h to .inc)
     The source code (asm.tsx.org/edit1.zip)
     Win32 API reference
     
          
WinMain
-------------------------------------------------------------------------------
This function is where the execution effectively begins... It initializes the
various window controls, files, and keyboard accelerators.

Keyboard accelerators are basically keyboard shortcuts to menu items.  To use
accelerators, an accelerator table is created as a resource, in the following
basic form:

acceltablename ACCELERATORS
{
	event, idvalue, [type] [options]
	...
}

event		corresponds to the key to be used.  It can be of the form "c", an 
		integer value representing a char, or a virtual-key value.
idvalue		integer which specifies the ID
type		specifies VIRTKEY or ASCII
options		NOINVERT, ALT, SHIFT, CONTROL


WinMain is also the home of the message loop.  Here, the GetMessage function 
grabs the next message from the message queue.  The TranslateAccelerator 
function then checks the message to see if it is an accelerator.  If it is, 
it handles the message.  If not, execution is passed to the TranslateMessage 
and DispatchMessage functions which sends the message to the appropriate
window procedure.

The message loop is broken when GetMessage retrieves the WM_QUIT message.

     
     
InitWindow
-------------------------------------------------------------------------------
This function creates and shows the main application window.

To create a window, first you must register a window class for that window.  
This is done by filling in a WNDCLASSEX structure and passing it to the 
RegisterClassEx function.  Then the CreateWindowEx function is called, using
the newly created window class to create and show the window.


     
InitEditControl
-------------------------------------------------------------------------------
This procedure initializes the Edit control and sizes it to fit inside the main
window.  

All edit controls belong to the window class "EDIT".  This class name is 
specified in the call to CreateWindowEx.  With common controls, you do not
define and register your own class, you use the pre-defined window classes,
defined in the commctrl.dll.
	
The edit window can have a variety of styles.  In addition to the standard 
window styles, the edit control has sever additional styles:
	ES_MULTILINE: control can have more than one line (default is 1 line only)
	ES_AUTOVSCROLL, ES_AUTOHSCROLL: If the text to be displayed exceeds the 
		size of the window, these flags tell the control to automatically 
		scroll the text into view
	ES_LEFT, ES_CENTER, ES_RIGHT: These set the text alignment, and apply only
		to multiline edit controls.
	ES_LOWERCASE, ES_UPPERCASE: Sets the text to all lowercase or uppercase
		characters, respectively.
	ES_OEMCONVERT: Converts the text into a specific character set.
	ES_NUMBER: Limits text input to numbers only.
	ES_NOHIDESEL: Specifies the selected text is not hidden when the control
		loses focus.
	ES_READONLY: Makes the text read-only.
	ES_PASSWORD: Displays all characters as * (or other user defined character)
	ES_WANTRETURN: Specifies that a return is inserted when the enter key is
		pressed, for multiline controls only.
	
	
	
	
InitFile
-------------------------------------------------------------------------------	
In this function, I get the command line arguments, and if a file is specified,
it is loaded into the editor.  If no file is specified, the editor begins with
a new document.

To get the command line arguments, I have created another function called
GetCommandLineArgs.  This uses the GetCommandLine API function to get the 
entire command line.  I then parse the string to get the arguments only.  If
the program is called with no arguments, the command line is returned from
GetCommandLine as a string.  If it has arguments, or is called from a directory
with spaces, the command line is returned as a string with the full exe's 
path in quotes, and with the arguments following.



MainWndProc
-------------------------------------------------------------------------------
This function is the window procedure for the main application window.  This is
specified in the lpfnWndProc member of the WNDCLASSEX struct, which is passed
to the RegisterClassEx function.  This is a callback function, called by
windows and requiring the following form:

MainWndProc proc hWnd:DWORD, uMsg:DWORD, wParam:DWORD, lParam:DWORD 
...
MainWndProc endp

The hWnd parameter specifies the window handle that the message is sent to.
uMsg specifies the message sent.  wParam and lParam have varying meanings, 
depending on which message is being sent.

The window procedure is responsible for handling all of the messages sent to the
application window.  Here, the editing functionality, menu commands, window 
re-sizing and window termination are handled here. 

I only handle the messages which I need for this application.  All other 
messages are passed to the DefWindowProc API function, so they are properly 
dealt with and not lost. 

The WM_DESTROY message should always be handled.  This message is sent when
the application window is closed.  The handler then calls the PostQuitMessage
API function, which is used to terminate the application.  Failure to call 
this will result in the window disappearing but the application remaining in
memory.

The WM_COMMAND message is sent whenever a menu item is chosen, or an accelerator
key is pressed.  The values of lParam and wParam for the WM_COMMAND are:
	wNotifyCode = HIWORD(wParam) : notification code 
	wID         = LOWORD(wParam) : item, control, or accelerator identifier 
	hwndCtl     = lParam         : handle of control which message is from

The WM_COMMAND handler is where all of the interface to the edit control
occurs.  



Edit Control Messages
-------------------------------------------------------------------------------
EM_SETSEL is used to set the selection in the edit control. wParam is the 
starting character position of the selection, and lParam is the ending position.
If wParam = 0 and lParam = -1, all the text is selected.  If wParam = -1, no 
text is selected (or a previous selection is de-selected).

EM_SETMODIFY sets or clears the modified flag of the edit control.  This flag
indicated whether the text has changed. wParam specified the true/false value to
set the modified flag to. This is automatically set when the text is first 
changed. The EM_GETMODIFY message can be used to retrieve the modified flag.

WM_COPY, WM_CUT, WM_PASTE, WM_CLEAR these messages affect the currently 
selected text, and perform their respective actions. For each, the wParam and
lParam parameters are set to 0.

EM_UNDO is used to undo the last edit operation.  A second call to WM_UNDO will
undo the undo...

There are many other edit control messages which you can use (I am just too 
lazy to write about them all...)  For further reading, consult the API 
reference...



EditOpenFile / FileOpen
-------------------------------------------------------------------------------
These functions are used to open a file, and load it into the edit control.

EditOpenFile first calls the GetOpenFileName API function to get the filename
to open.  For this function, you must first fill the OPENFILENAME structure,
which contains the information needed to initialize the Open common dialog box.
The GetOpenFilaName function returns TRUE if a file was selected, FALSE 
otherwise.  The selected file is returned in the lpstrFile member of the
OPENFILENAME structure.

This filename is then passed to the FileOpen function, which actually opens
the file, and puts it into the edit controls text buffer.  It begins by 
opening the file with the CreateFile API, using the OPEN_EXISTING parameter.
Next, the file size is determined, so it is known how many bytes to allocate to
store it.  The memory buffer is allocated using the HeapAlloc API function, and
Read File is used to copy the contents of the file into the newly created 
buffer.  This buffer is then copied to the edit control, by sending it the 
WM_SETTEXT message. This function ends by closing the file, and releasing the
memory buffer.



EditSaveFile / FileSave
-------------------------------------------------------------------------------
These functions are very similar to their open counterparts, the only 
differences being, instead of reading from the file and writing to the edit
control, it is saved to the file and read from the control.



ConfirmOperation
-------------------------------------------------------------------------------
This is a simple utility function which i use to confirm that the user really
wants to do what he says...

The function checks to see if the edit control has been modified, and if so, it
shows a yes/no message box.  This is done by using the MessageBox API with the
MB_YESNO option.  It then returns IDYES if the user chooses yes (or the control 
has not been modified), or IDNO, if the user chooses no.



SetTitle
-------------------------------------------------------------------------------
This is another utility function which sets the application title to show the
filename of the file currently being edited, or Untitled for a new file.

To do this, it sends the WM_SETTEXT message to the main application window, with
the new title as the lParam.



Conclusion
-------------------------------------------------------------------------------
Hmm.. this turned out to be not much of a tutorial on edit controls... as I 
have added a lot of non-edit control related code in an attempt to prevent the
example program from being a completely useless app... Instead it is only a 
mostly useless app...

Of course, for a detailed description of Edit Controls, read the Windows API 
reference.


-------------------------------------------------------------------------------
Copyright (C) 1999 by Bill
[e-mail]