📄 aescrypt_mmx.asm
字号:
; ---------------------------------------------------------------------------
; Copyright (c) 2002, Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK.
; All rights reserved.
;
; LICENSE TERMS
;
; The free distribution and use of this software in both source and binary
; form is allowed (with or without changes) provided that:
;
; 1. distributions of this source code include the above copyright
; notice, this list of conditions and the following disclaimer;
;
; 2. distributions in binary form include the above copyright
; notice, this list of conditions and the following disclaimer
; in the documentation and/or other associated materials;
;
; 3. the copyright holder's name is not used to endorse products
; built using this software without specific written permission.
;
; ALTERNATIVELY, provided that this notice is retained in full, this product
; may be distributed under the terms of the GNU General Public License (GPL),
; in which case the provisions of the GPL apply INSTEAD OF those given above.
;
; DISCLAIMER
;
; This software is provided 'as is' with no explicit or implied warranties
; in respect of its properties, including, but not limited to, correctness
; and/or fitness for purpose.
; ---------------------------------------------------------------------------
; Issue Date: 26/08/2003
; An AES (Rijndael) implementation for the Pentium MMX family using the NASM
; assembler <http://sourceforge.net/projects/nasm>. This version implements
; the standard AES block length (128 bits, 16 bytes) with the same interface
; as that used in my C/C++ implementation. This code does not preserve the
; eax, ecx or edx registers or the artihmetic status flags. However, the ebx,
; esi, edi, and ebp registers are preserved across calls. Only encryption
; and decryption are implemented here, the key schedule code being that from
; compiling aes.c with USE_ASM defined. This code uses VC++ register saving
; conentions; if it is used with another compiler, its conventions for using
; and saving registers will need to be checked (and calling conventions). If
; the parent application uses floating point instructions, then FPU_USED has
; to be defined below. Define AES_DLL for the Dynamic Link Library version.
; The NASM command line for the VC++ custom build step is:
;
; nasm -O2 -f win32 -o "$(TargetDir)\$(InputName).obj" "$(InputPath)"
section .text use32
; aes_rval aes_encrypt(const unsigned char in_blk[],
; unsigned char out_blk[], const aes_ctx cx[1]);
; aes_rval aes_decrypt(const unsigned char in_blk[],
; unsigned char out_blk[], const aes_ctx cx[1]);
;
; comment in/out the following lines to obtain the desired subroutines
%define ENCRYPTION ; define if encryption is needed
%define DECRYPTION ; define if decryption is needed
; define this if floating point instructions are being used
;%define FPU_USED
; The DLL interface must use the _stdcall convention in which the number
; of bytes of parameter space is added after an @ to the routine's name.
; We must also remove our parameters from the stack before return (see
; the do_ret macro). Define AES_DLL for the Dynamic Link Library version.
;%define AES_DLL
tlen: equ 1024 ; length of each of 4 'xor' arrays (256 32-bit words)
; offsets to parameters with one register pushed onto stack
in_blk: equ 4 ; input byte array address parameter
out_blk:equ 8 ; output byte array address parameter
ctx: equ 12 ; AES context structure
stk_spc:equ 16 ; stack space
; offsets in context structure
ksch: equ 0 ; encryption key schedule base address
nrnd: equ 240 ; number of rounds
; This macro performs a forward encryption cycle. It is entered with
; the previous round column values in eax, ebx, ecx and edi and exits
; with the final values in the same registers
%macro fwd_rnd 1-2 _t_fn
movzx esi,al
movzx edi,ah
shr eax,16
movd mm4,[4*esi+%2]
movd mm7,[4*edi+%2+tlen]
movzx esi,al
movzx edi,ah
movd mm6,[4*esi+%2+2*tlen]
movd mm5,[4*edi+%2+3*tlen]
movzx esi,bl
movzx edi,bh
shr ebx,16
movd mm0,[4*esi+%2]
movd mm1,[4*edi+%2+tlen]
movzx esi,bl
movzx edi,bh
movd mm2,[4*esi+%2+2*tlen]
movd mm3,[4*edi+%2+3*tlen]
pxor mm5,mm0
pxor mm4,mm1
pxor mm7,mm2
pxor mm6,mm3
movzx esi,cl
movzx edi,ch
shr ecx,16
movd mm0,[4*esi+%2]
movd mm1,[4*edi+%2+tlen]
movzx esi,cl
movzx edi,ch
movd mm2,[4*esi+%2+2*tlen]
movd mm3,[4*edi+%2+3*tlen]
pxor mm6,mm0
pxor mm5,mm1
pxor mm4,mm2
pxor mm7,mm3
movzx esi,dl
movzx edi,dh
shr edx,16
movd mm0,[4*esi+%2]
movd mm1,[4*edi+%2+tlen]
movzx esi,dl
movzx edi,dh
movd mm2,[4*esi+%2+2*tlen]
movd mm3,[4*edi+%2+3*tlen]
pxor mm7,mm0
pxor mm6,mm1
pxor mm5,mm2
pxor mm4,mm3
movd eax,mm4
movd ebx,mm5
movd ecx,mm6
movd edx,mm7
xor eax,[%1]
xor ebx,[%1+ 4]
xor ecx,[%1+ 8]
xor edx,[%1+12]
%endmacro
; This macro performs an inverse encryption cycle. It is entered with
; the previous round column values in eax, ebx, ecx and edx and exits
; with the final values in the same registers
%macro inv_rnd 1-2 _t_in
movzx esi,al
movzx edi,ah
shr eax,16
movd mm4,[4*esi+%2]
movd mm5,[4*edi+%2+tlen]
movzx esi,al
movzx edi,ah
movd mm6,[4*esi+%2+2*tlen]
movd mm7,[4*edi+%2+3*tlen]
movzx esi,bl
movzx edi,bh
shr ebx,16
movd mm0,[4*esi+%2]
movd mm1,[4*edi+%2+tlen]
movzx esi,bl
movzx edi,bh
movd mm2,[4*esi+%2+2*tlen]
movd mm3,[4*edi+%2+3*tlen]
pxor mm5,mm0
pxor mm6,mm1
pxor mm7,mm2
pxor mm4,mm3
movzx esi,cl
movzx edi,ch
shr ecx,16
movd mm0,[4*esi+%2]
movd mm1,[4*edi+%2+tlen]
movzx esi,cl
movzx edi,ch
movd mm2,[4*esi+%2+2*tlen]
movd mm3,[4*edi+%2+3*tlen]
pxor mm6,mm0
pxor mm7,mm1
pxor mm4,mm2
pxor mm5,mm3
movzx esi,dl
movzx edi,dh
shr edx,16
movd mm0,[4*esi+%2]
movd mm1,[4*edi+%2+tlen]
movzx esi,dl
movzx edi,dh
movd mm2,[4*esi+%2+2*tlen]
movd mm3,[4*edi+%2+3*tlen]
pxor mm7,mm0
pxor mm4,mm1
pxor mm5,mm2
pxor mm6,mm3
movd eax,mm4
movd ebx,mm5
movd ecx,mm6
movd edx,mm7
xor eax,[%1]
xor ebx,[%1+ 4]
xor ecx,[%1+ 8]
xor edx,[%1+12]
%endmacro
; Standard return code. The DLL has to implement the _stdcall
; calling interface on return. In this case we have to take our
; parameters (3 4-byte pointers) off the stack. Also we need an
; emms instruction is needed to reset the FPU if flaoting point
; instuctions are needed
%macro do_ret 0
%ifdef FPU_USED
emms
%endif
%ifdef AES_DLL
ret 12
%else
ret
%endif
%endmacro
%macro do_name 1
%ifndef AES_DLL
global %1
%1:
%else
global %1@12
export %1@12
%1@12:
%endif
%endmacro
; AES (Rijndael) Encryption Subroutine
%ifdef ENCRYPTION
extern _t_fn
extern _t_fl
do_name _aes_encrypt
sub esp,stk_spc
mov [esp+12],ebp
mov [esp+ 8],ebx
mov [esp+ 4],esi
mov [esp ],edi
mov esi,[esp+in_blk+stk_spc] ; input pointer
mov ebp,[esp+ctx+stk_spc] ; context pointer
; input four columns and xor in first round key
mov eax,[esi ]
mov ebx,[esi+ 4]
xor eax,[ebp ]
xor ebx,[ebp+ 4]
mov ecx,[esi+ 8]
mov edx,[esi+12]
xor ecx,[ebp+ 8]
xor edx,[ebp+12]
; determine the number of rounds
mov esi,[ebp+4*45]
mov edi,[ebp+4*52]
xor esi,[ebp+4*53]
xor esi,edi
je .1
cmp edi,10
je .3
cmp edi,12
je .2
mov ebp,[esp+12]
mov ebx,[esp+ 8]
mov esi,[esp+ 4]
mov edi,[esp ]
lea esp,[esp+stk_spc]
mov eax,-1
do_ret
.1: fwd_rnd ebp+ 16 ; 14 rounds for 256-bit key
fwd_rnd ebp+ 32
lea ebp,[ebp+32]
.2: fwd_rnd ebp+ 16 ; 12 rounds for 192-bit key
fwd_rnd ebp+ 32
lea ebp,[ebp+32]
.3: fwd_rnd ebp+ 16 ; 10 rounds for 128-bit key
fwd_rnd ebp+ 32
fwd_rnd ebp+ 48
fwd_rnd ebp+ 64
fwd_rnd ebp+ 80
fwd_rnd ebp+ 96
fwd_rnd ebp+112
fwd_rnd ebp+128
fwd_rnd ebp+144
fwd_rnd ebp+160,_t_fl ; last round uses a different table
; move final values to the output array
mov ebp,[esp+out_blk+stk_spc]
mov [ebp+12],edx
mov [ebp+ 8],ecx
mov [ebp+ 4],ebx
mov [ebp ],eax
mov ebp,[esp+12]
mov ebx,[esp+ 8]
mov esi,[esp+ 4]
mov edi,[esp ]
lea esp,[esp+stk_spc]
xor eax,eax
do_ret
%endif
; AES (Rijndael) Decryption Subroutine
%ifdef DECRYPTION
extern _t_in
extern _t_il
do_name _aes_decrypt
sub esp,stk_spc
mov [esp+12],ebp
mov [esp+ 8],ebx
mov [esp+ 4],esi
mov [esp],edi
mov esi,[esp+in_blk+stk_spc] ; input pointer
mov ebp,[esp+ctx+stk_spc] ; context pointer
; input four columns
mov eax,[esi]
mov ebx,[esi+4]
mov ecx,[esi+8]
mov edx,[esi+12]
mov edi,[ebp+4*52]
mov esi,[ebp+4*45]
xor esi,[ebp+4*53]
xor esi,edi
jne .1
mov edi,14
; xor in initial keys
.1: lea esi,[4*edi]
xor eax,[ebp+4*esi]
xor ebx,[ebp+4*esi+4]
xor ecx,[ebp+4*esi+8]
xor edx,[ebp+4*esi+12]
cmp edi,10
je .3
cmp edi,12
je .2
cmp edi,14
jne .4
inv_rnd ebp+208 ; 14 rounds for 256-bit key
inv_rnd ebp+192
.2: inv_rnd ebp+176 ; 12 rounds for 192-bit key
inv_rnd ebp+160
.3: inv_rnd ebp+144 ; 10 rounds for 128-bit key
inv_rnd ebp+128
inv_rnd ebp+112
inv_rnd ebp+ 96
inv_rnd ebp+ 80
inv_rnd ebp+ 64
inv_rnd ebp+ 48
inv_rnd ebp+ 32
inv_rnd ebp+ 16
inv_rnd ebp,_t_il ; last round uses a different table
; move final values to the output array
mov ebp,[esp+out_blk+stk_spc]
mov [ebp+12],edx
mov [ebp+8],ecx
mov [ebp+4],ebx
mov [ebp],eax
mov ebp,[esp+12]
mov ebx,[esp+ 8]
mov esi,[esp+ 4]
mov edi,[esp]
lea esp,[esp+stk_spc]
xor eax,eax
do_ret
.4: mov ebp,[esp+12]
mov ebx,[esp+ 8]
mov esi,[esp+ 4]
mov edi,[esp]
lea esp,[esp+stk_spc]
mov eax,-1
do_ret
%endif
end
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -