shlobj.h

vc环境下的pgp源码

                                UINT uFlags) PURE;

    STDMETHOD(InvokeCommand)(THIS_
                             LPCMINVOKECOMMANDINFO lpici) PURE;

    STDMETHOD(GetCommandString)(THIS_
                                UINT        idCmd,
                                UINT        uType,
                                UINT      * pwReserved,
                                LPSTR       pszName,
                                UINT        cchMax) PURE;
};

typedef IContextMenu *  LPCONTEXTMENU;

//
// IContextMenu2 (IContextMenu with one new member)
//
// IContextMenu2::HandleMenuMsg
//
//  This function is called, if the client of IContextMenu is aware of
// IContextMenu2 interface and receives one of following messages while
// it is calling TrackPopupMenu (in the window proc of hwndOwner):
//      WM_INITPOPUP, WM_DRAWITEM and WM_MEASUREITEM
//  The callee may handle these messages to draw owner draw menuitems.
//

#undef  INTERFACE
#define INTERFACE   IContextMenu2

DECLARE_INTERFACE_(IContextMenu2, IUnknown)
{
    // *** IUnknown methods ***
    STDMETHOD(QueryInterface) (THIS_ REFIID riid, LPVOID * ppvObj) PURE;
    STDMETHOD_(ULONG,AddRef) (THIS)  PURE;
    STDMETHOD_(ULONG,Release) (THIS) PURE;

    STDMETHOD(QueryContextMenu)(THIS_
                                HMENU hmenu,
                                UINT indexMenu,
                                UINT idCmdFirst,
                                UINT idCmdLast,
                                UINT uFlags) PURE;

    STDMETHOD(InvokeCommand)(THIS_
                             LPCMINVOKECOMMANDINFO lpici) PURE;

    STDMETHOD(GetCommandString)(THIS_
                                UINT        idCmd,
                                UINT        uType,
                                UINT      * pwReserved,
                                LPSTR       pszName,
                                UINT        cchMax) PURE;
    STDMETHOD(HandleMenuMsg)(THIS_
                             UINT uMsg,
                             WPARAM wParam,
                             LPARAM lParam) PURE;
};

typedef IContextMenu2 * LPCONTEXTMENU2;




//===========================================================================
//
// Interface: IShellExtInit
//
//  The IShellExtInit interface is used by the explorer to initialize shell
// extension objects. The explorer (1) calls CoCreateInstance (or equivalent)
// with the registered CLSID and IID_IShellExtInit, (2) calls its Initialize
// member, then (3) calls its QueryInterface to a particular interface (such
// as IContextMenu or IPropSheetExt and (4) performs the rest of operation.
//
//
// [Member functions]
//
// IShellExtInit::Initialize
//
//  This member function is called when the explorer is initializing either
// context menu extension, property sheet extension or non-default drag-drop
// extension.
//
//  Parameters: (context menu or property sheet extension)
//   pidlFolder -- Specifies the parent folder
//   lpdobj -- Spefifies the set of items selected in that folder.
//   hkeyProgID -- Specifies the type of the focused item in the selection.
//
//  Parameters: (non-default drag-and-drop extension)
//   pidlFolder -- Specifies the target (destination) folder
//   lpdobj -- Specifies the items that are dropped (see the description
//    about shell's clipboard below for clipboard formats).
//   hkeyProgID -- Specifies the folder type.
//
//===========================================================================

#undef  INTERFACE
#define INTERFACE   IShellExtInit

DECLARE_INTERFACE_(IShellExtInit, IUnknown)
{
    // *** IUnknown methods ***
    STDMETHOD(QueryInterface) (THIS_ REFIID riid, LPVOID * ppvObj) PURE;
    STDMETHOD_(ULONG,AddRef) (THIS)  PURE;
    STDMETHOD_(ULONG,Release) (THIS) PURE;

    // *** IShellExtInit methods ***
    STDMETHOD(Initialize)(THIS_ LPCITEMIDLIST pidlFolder,
                          LPDATAOBJECT lpdobj, HKEY hkeyProgID) PURE;
};

typedef IShellExtInit * LPSHELLEXTINIT;


//===========================================================================
//
// Interface: IShellPropSheetExt
//
//  The explorer uses the IShellPropSheetExt to allow property sheet
// extensions or control panel extensions to add additional property
// sheet pages.
//
//
// [Member functions]
//
// IShellPropSheetExt::AddPages
//
//  The explorer calls this member function when it finds a registered
// property sheet extension for a particular type of object. For each
// additional page, the extension creates a page object by calling
// CreatePropertySheetPage API and calls lpfnAddPage.
//
//  Parameters:
//   lpfnAddPage -- Specifies the callback function.
//   lParam -- Specifies the opaque handle to be passed to the callback function.
//
//
// IShellPropSheetExt::ReplacePage
//
//  The explorer never calls this member of property sheet extensions. The
// explorer calls this member of control panel extensions, so that they
// can replace some of default control panel pages (such as a page of
// mouse control panel).
//
//  Parameters:
//   uPageID -- Specifies the page to be replaced.
//   lpfnReplace Specifies the callback function.
//   lParam -- Specifies the opaque handle to be passed to the callback function.
//
//===========================================================================

#undef  INTERFACE
#define INTERFACE   IShellPropSheetExt

DECLARE_INTERFACE_(IShellPropSheetExt, IUnknown)
{
    // *** IUnknown methods ***
    STDMETHOD(QueryInterface) (THIS_ REFIID riid, LPVOID * ppvObj) PURE;
    STDMETHOD_(ULONG,AddRef) (THIS)  PURE;
    STDMETHOD_(ULONG,Release) (THIS) PURE;

    // *** IShellPropSheetExt methods ***
    STDMETHOD(AddPages)(THIS_ LPFNADDPROPSHEETPAGE lpfnAddPage, LPARAM lParam) PURE;
    STDMETHOD(ReplacePage)(THIS_ UINT uPageID, LPFNADDPROPSHEETPAGE lpfnReplaceWith, LPARAM lParam) PURE;
};

typedef IShellPropSheetExt * LPSHELLPROPSHEETEXT;


//===========================================================================
//
// IPersistFolder Interface
//
//  The IPersistFolder interface is used by the file system implementation of
// IShellFolder::BindToObject when it is initializing a shell folder object.
//
//
// [Member functions]
//
// IPersistFolder::Initialize
//
//  This member function is called when the explorer is initializing a
// shell folder object.
//
//  Parameters:
//   pidl -- Specifies the absolute location of the folder.
//
//===========================================================================

#undef  INTERFACE
#define INTERFACE   IPersistFolder

DECLARE_INTERFACE_(IPersistFolder, IPersist)    // fld
{
    // *** IUnknown methods ***
    STDMETHOD(QueryInterface)(THIS_ REFIID riid, LPVOID * ppvObj) PURE;
    STDMETHOD_(ULONG,AddRef)(THIS)  PURE;
    STDMETHOD_(ULONG,Release)(THIS) PURE;

    // *** IPersist methods ***
    STDMETHOD(GetClassID)(THIS_ LPCLSID lpClassID) PURE;

    // *** IPersistFolder methods ***
    STDMETHOD(Initialize)(THIS_ LPCITEMIDLIST pidl) PURE;
};

typedef IPersistFolder *LPPERSISTFOLDER;


//===========================================================================
//
// IExtractIcon interface
//
//  This interface is used in two different places in the shell.
//
// Case-1: Icons of sub-folders for the scope-pane of the explorer.
//
//  It is used by the explorer to get the "icon location" of
// sub-folders from each shell folders. When the user expands a folder
// in the scope pane of the explorer, the explorer does following:
//  (1) binds to the folder (gets IShellFolder),
//  (2) enumerates its sub-folders by calling its EnumObjects member,
//  (3) calls its GetUIObjectOf member to get IExtractIcon interface
//     for each sub-folders.
//  In this case, the explorer uses only IExtractIcon::GetIconLocation
// member to get the location of the appropriate icon. An icon location
// always consists of a file name (typically DLL or EXE) and either an icon
// resource or an icon index.
//
//
// Case-2: Extracting an icon image from a file
//
//  It is used by the shell when it extracts an icon image
// from a file. When the shell is extracting an icon from a file,
// it does following:
//  (1) creates the icon extraction handler object (by getting its CLSID
//     under the {ProgID}\shell\ExtractIconHanler key and calling
//     CoCreateInstance requesting for IExtractIcon interface).
//  (2) Calls IExtractIcon::GetIconLocation.
//  (3) Then, calls IExtractIcon::ExtractIcon with the location/index pair.
//  (4) If (3) returns NOERROR, it uses the returned icon.
//  (5) Otherwise, it recursively calls this logic with new location
//     assuming that the location string contains a fully qualified path name.
//
//  From extension programmer's point of view, there are only two cases
// where they provide implementations of IExtractIcon:
//  Case-1) providing explorer extensions (i.e., IShellFolder).
//  Case-2) providing per-instance icons for some types of files.
//
// Because Case-1 is described above, we'll explain only Case-2 here.
//
// When the shell is about display an icon for a file, it does following:
//  (1) Finds its ProgID and ClassID.
//  (2) If the file has a ClassID, it gets the icon location string from the
//    "DefaultIcon" key under it. The string indicates either per-class
//    icon (e.g., "FOOBAR.DLL,2") or per-instance icon (e.g., "%1,1").
//  (3) If a per-instance icon is specified, the shell creates an icon
//    extraction handler object for it, and extracts the icon from it
//    (which is described above).
//
//  It is important to note that the shell calls IExtractIcon::GetIconLocation
// first, then calls IExtractIcon::Extract. Most application programs
// that support per-instance icons will probably store an icon location
// (DLL/EXE name and index/id) rather than an icon image in each file.
// In those cases, a programmer needs to implement only the GetIconLocation
// member and it Extract member simply returns S_FALSE. They need to
// implement Extract member only if they decided to store the icon images
// within files themselved or some other database (which is very rare).
//
//
//
// [Member functions]
//
//
// IExtractIcon::GetIconLocation
//
//  This function returns an icon location.
//
//  Parameters:
//   uFlags     [in]  -- Specifies if it is opened or not (GIL_OPENICON or 0)
//   szIconFile [out] -- Specifies the string buffer buffer for a location name.
//   cchMax     [in]  -- Specifies the size of szIconFile (almost always MAX_PATH)
//   piIndex    [out] -- Sepcifies the address of UINT for the index.
//   pwFlags    [out] -- Returns GIL_* flags
//  Returns:
//   NOERROR, if it returns a valid location; S_FALSE, if the shell use a
//   default icon.
//
//  Notes: The location may or may not be a path to a file. The caller can
//   not assume anything unless the subsequent Extract member call returns
//   S_FALSE.
//
//   if the returned location is not a path to a file, GIL_NOTFILENAME should
//   be set in the returned flags.
//
// IExtractIcon::Extract
//
//  This function extracts an icon image from a specified file.
//
//  Parameters:
//   pszFile [in] -- Specifies the icon location (typically a path to a file).
//   nIconIndex [in] -- Specifies the icon index.
//   phiconLarge [out] -- Specifies the HICON variable for large icon.
//   phiconSmall [out] -- Specifies the HICON variable for small icon.
//   nIconSize [in] -- Specifies the size icon required (size of large icon)
//                     LOWORD is the requested large icon size
//                     HIWORD is the requested small icon size
//  Returns:
//   NOERROR, if it extracted the from the file.
//   S_FALSE, if the caller should extract from the file specified in the
//           location.
//
//===========================================================================

// GetIconLocation() input flags

#define GIL_OPENICON     0x0001      // allows containers to specify an "open" look
#define GIL_FORSHELL     0x0002      // icon is to be displayed in a ShellFolder

// GetIconLocation() return flags

#define GIL_SIMULATEDOC  0x0001      // simulate this document icon for this
#define GIL_PERINSTANCE  0x0002      // icons from this class are per instance (each file has its own)
#define GIL_PERCLASS     0x0004      // icons from this class per class (shared for all files of this type)
#define GIL_NOTFILENAME  0x0008      // location is not a filename, must call ::ExtractIcon
#define GIL_DONTCACHE    0x0010      // this icon should not be cached

#undef  INTERFACE
#define INTERFACE   IExtractIconA

DECLARE_INTERFACE_(IExtractIconA, IUnknown)     // exic
{
    // *** IUnknown methods ***
    STDMETHOD(QueryInterface) (THIS_ REFIID riid, LPVOID * ppvObj) PURE;
    STDMETHOD_(ULONG,AddRef) (THIS)  PURE;
    STDMETHOD_(ULONG,Release) (THIS) PURE;

    // *** IExtractIcon methods ***
    STDMETHOD(GetIconLocation)(THIS_
                         UINT   uFlags,
                         LPSTR  szIconFile,
                         UINT   cchMax,
                         int   * piIndex,