subddc.h

机械产品控制器

//  writeread.c
#define         WriteDeviceAddress     0xa0
#define         ReadDviceAddress       0xa1
#define         WriteDevice8563        0xa2
#define         ReadDevice8563         0xa3

//  keysub.c
#define         KEY_STATUS             1
#define         KEY_START              2
#define         KEY_STOP               3
#define         KEY_SETUP              4
#define         KEY_ESC                5
#define         KEY_ENTER              6
#define         KEY_HELP               7
#define         KEY_TIME               8
#define         KEY_DOWN               9
#define         KEY_UP                 10

// subdd.c
#define         TRAN_OFFSET            5
#define         TRAN_SUCCESS           1
#define         TRAN_FAIL              2
#define         TRAN_STOP              3
#define         TRAN_START             4
//    如果30秒内仍然有错误出现则显示错误信息
#define         ESC_TIME_MAX           10
//    如果250秒内仍然有错误出现则显示错误信息
#define         ENTER_TIME_MAX         250
#define         WRITEERROR_TIME_MAX    2
#define         HELP_MAX               5
#define         TRAN_DELAY_MAX         20

// subddc.h
#define         DEC_CODE               16
#define         XIE_CODE               17
#define         C_MH_CODE              18
#define         E_MH_CODE              19
#define         SET_TEMPER_MAX         35
#define         TEMPER_REPAIR_MAX      10
#define         START_TEMPER_MAX       10
#define         DEFROST_TEMPER_MAX     20
#define         SET_TEMPER_MIN         12
#define         TEMPER_REPAIR_MIN      0
#define         START_TEMPER_MIN       0
#define         DEFROST_TEMPER_MIN     12
#define         TEMPER_REPAIR_MID      5
#define         PT_READ24C02_START     0x40
#define         PT_READ24C02_END       0xf8
#define         START_24C02_ADDRESS    0x40
#define         END_24C02_ADDRESS      0xf8
#define         PT_WRITE24C02_ADDRESS  0x35
#define         PT_READ24C02_ADDRESS   0x36
#define         RECE_CONST             3
#define         TRRE_GAP_MAX           5

//   subddc.c
#define         QSBH_CODE              1
#define         GYBH_CODE              2
#define         DYBH_CODE              3
#define         YYBH_CODE              4
#define         QXBH_CODE              5
#define         YSJBH_CODE             6
#define         FJBH_CODE              7
#define         SBBH_CODE              8



sbit	DI=P1^2;
sbit	W_R=P1^3;
sbit	E=P1^4;
sbit	CS1=P1^6;
sbit	CS2=P1^5;
sbit    clr_wdt=P1^7;

sbit    en_373=P2^7;
sbit    SCL=P3^5;
sbit    SDA=P3^4;