resource.h

多谢

om the buffer, and the program will
			// loop back around to WaitCommEvent().
			// 
			// At this point you will be in the situation where m_OverlappedStruct.hEvent is set,
			// but there are no bytes available to read.  If you proceed and call
			// ReadFile(), it will return immediatly due to the async port setup, but
			// GetOverlappedResults() will not return until the next character arrives.
			//
			// It is not desirable for the GetOverlappedResults() function to be in 
			// this state.  The thread shutdown event (event 0) and the WriteFile()
			// event (Event2) will not work if the thread is blocked by GetOverlappedResults().
			//
			// The solution to this is to check the buffer with a call to ClearCommError().
			// This call will reset the event handle, and if there are no bytes to read
			// we can loop back through WaitCommEvent() again, then proceed.
			// If there are really bytes to read, do nothing and proceed.
		
			bResult = ClearCommError(port->m_hComm, &dwError, &comstat);

			if (comstat.cbInQue == 0)
				continue;
		}	// end if bResult

		// Main wait function.  This function will normally block the thread
		// until one of nine events occur that require action.
		Event = WaitForMultipleObjects(3, port->m_hEventArray, FALSE, INFINITE);

		switch (Event)
		{
		case 0:
			{
				// Shutdown event.  This is event zero so it will be
				// the higest priority and be serviced first.

			 	port->m_bThreadAlive = FALSE;
				
				// Kill this thread.  break is not needed, but makes me feel better.
				AfxEndThread(100);
				break;
			}
		case 1:	// read event
			{
				GetCommMask(port->m_hComm, &CommEvent);
				if (CommEvent & EV_CTS)
					::SendMessage(port->m_pOwner->m_hWnd, WM_COMM_CTS_DETECTED, (WPARAM) 0, (LPARAM) port->m_nPortNr);
				if (CommEvent & EV_RXFLAG)
					::SendMessage(port->m_pOwner->m_hWnd, WM_COMM_RXFLAG_DETECTED, (WPARAM) 0, (LPARAM) port->m_nPortNr);
				if (CommEvent & EV_BREAK)
					::SendMessage(port->m_pOwner->m_hWnd, WM_COMM_BREAK_DETECTED, (WPARAM) 0, (LPARAM) port->m_nPortNr);
				if (CommEvent & EV_ERR)
					::SendMessage(port->m_pOwner->m_hWnd, WM_COMM_ERR_DETECTED, (WPARAM) 0, (LPARAM) port->m_nPortNr);
				if (CommEvent & EV_RING)
					::SendMessage(port->m_pOwner->m_hWnd, WM_COMM_RING_DETECTED, (WPARAM) 0, (LPARAM) port->m_nPortNr);
				
				if (CommEvent & EV_RXCHAR)
					// Receive character event from port.
					if(!port->m_bBlockRead)
						ReceiveChar(port, comstat);
					
				break;
			}  
		case 2: // write event
			{
				// Write character event from port
				WriteChar(port);
				break;
			}

		} // end switch

	} // close forever loop

	return 0;
}

//
// start comm watching
//
BOOL CSerialPort::StartMonitoring()
{
	if (!(m_Thread = AfxBeginThread(CommThread, this)))
		return FALSE;
	TRACE("Thread started\n");
	return TRUE;	
}

//
// Restart the comm thread
//
BOOL CSerialPort::RestartMonitoring()
{
	TRACE("Thread resumed\n");
	m_Thread->ResumeThread();
	return TRUE;	
}


//
// Suspend the comm thread
//
BOOL CSerialPort::StopMonitoring()
{
	TRACE("Thread suspended\n");
	if(m_bThreadAlive)
	{
		m_Thread->SuspendThread(); 
		m_bThreadAlive=FALSE;
	}
	return TRUE;	
}


//
// If there is a error, give the right message
//
void CSerialPort::ProcessErrorMessage(char* ErrorText)
{
	char *Temp = new char[200];
	
	LPVOID lpMsgBuf;

	FormatMessage( 
		FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM,
		NULL,
		GetLastError(),
		MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT), // Default language
		(LPTSTR) &lpMsgBuf,
		0,
		NULL 
	);

	sprintf(Temp, "WARNING:  %s Failed with the following error: \n%s\nPort: %d\n", (char*)ErrorText, lpMsgBuf, m_nPortNr); 
	MessageBox(NULL, Temp, "Application Error", MB_ICONSTOP);

	LocalFree(lpMsgBuf);
	delete[] Temp;
}

//
// Write a character.
//
void CSerialPort::WriteChar(CSerialPort* port)
{
	BOOL bWrite = TRUE;
	BOOL bResult = TRUE;

	DWORD BytesSent = 0;

	ResetEvent(port->m_hWriteEvent);

	// Gain ownership of the critical section
	EnterCriticalSection(&port->m_csCommunicationSync);

	if (bWrite)
	{
		// Initailize variables
		port->m_ov.Offset = 0;
		port->m_ov.OffsetHigh = 0;

		// Clear buffer
		PurgeComm(port->m_hComm, PURGE_RXCLEAR | PURGE_TXCLEAR | PURGE_RXABORT | PURGE_TXABORT);

		bResult = WriteFile(port->m_hComm,							// Handle to COMM Port
							port->m_szWriteBuffer,					// Pointer to message buffer in calling finction
							port->m_nToSend,								// Length of message to send
							&BytesSent,								// Where to store the number of bytes sent
							&port->m_ov);							// Overlapped structure

		// deal with any error codes
		if (!bResult)  
		{
			DWORD dwError = GetLastError();
			switch (dwError)
			{
				case ERROR_IO_PENDING:
					{
						// continue to GetOverlappedResults()
						BytesSent = 0;
						bWrite = FALSE;
						break;
					}
				default:
					{
						// all other error codes
						port->ProcessErrorMessage("WriteFile()");
					}
			}
		} 
		else
		{
			LeaveCriticalSection(&port->m_csCommunicationSync);
		}
	} // end if(bWrite)

	if (!bWrite)
	{
		bWrite = TRUE;
	
		bResult = GetOverlappedResult(port->m_hComm,	// Handle to COMM port 
									  &port->m_ov,		// Overlapped structure
									  &BytesSent,		// Stores number of bytes sent
									  TRUE); 			// Wait flag

		LeaveCriticalSection(&port->m_csCommunicationSync);

		// deal with the error code 
		if (!bResult)  
		{
			port->ProcessErrorMessage("GetOverlappedResults() in WriteFile()");
		}	
	} // end if (!bWrite)

	// Verify that the data size send equals what we tried to send
	if (BytesSent != port->m_nToSend)
	{
		TRACE("WARNING: WriteFile() error.. Bytes Sent: %d; Message Length: %d\n", BytesSent, strlen((char*)port->m_szWriteBuffer));
	}
}

//
// Character received. Inform the owner
//
void CSerialPort::ReceiveChar(CSerialPort* port, COMSTAT comstat)
{
	BOOL  bRead = TRUE; 
	BOOL  bResult = TRUE;
	DWORD dwError = 0;
	DWORD BytesRead = 0;
	unsigned char RXBuff=0;

	for (;;) 
	{ 
		// Gain ownership of the comm port critical section.
		// This process guarantees no other part of this program 
		// is using the port object. 
		
		EnterCriticalSection(&port->m_csCommunicationSync);

		// ClearCommError() will upda