peripherals.dsc

realview22.rar

;; ARMulator configuration file type 3
;; - peripherals.dsc -
;; Copyright (c) 1996-2001 ARM Limited. All Rights Reserved.

;; RCS $Revision: 1.23.2.17.18.3 $
;; Checkin $Date: 2004/10/27 15:52:35 $
;; Revising $Author: ljameson $
 
;;
;; This is a non-user-edittable configuration file for ARMulator (ADS1.2)
;;


{ Peripherals


{ Trickbox
MODEL_DLL_FILENAME=Trickbox
META_GUI_INTERFACE=Trickbox
NewTrickBox=1

;TrickBoxBaseAddress=0x3100000
;TrickBoxTubeAddress=0x3000000
;TrickBoxSWIAccAddress=0x3000060
;- These now have default offsets from BASE, except for 9EJ -
; TrickBoxLowAbortAddress=0x03000040
; TrickBoxHighAbortAddress=0x03000044
; TrickBoxSingleAbortAddress=0x03000064
;[for 9EJ]TrickBoxSingleAbortAddress=0x3100008

;TrickBoxSingleAbortDefault=0x00600000
TrickBoxSingleAbortDefault=0x50000020
;Not used yet.
;TrickBoxLowAbortDefault=0x00700000 or 0x40000000
;TrickBoxHighAbortDefault=0x01f00000 or 0x4fffffff

}
{ No_Trickbox=Nothing
META_GUI_INTERFACE=Trickbox
}

{ Tracer
;I prefer to use the global VERBOSE flag than a local one.
;VERBOSE=True
MODEL_DLL_FILENAME=Tracer
META_GUI_INTERFACE=Tracer
;; Output options - can be plaintext to file, binary to file or to RDI log
;; window. (Checked in the order RDILog, File, BinFile.)
RDILog=False
File=armul.trc
BinFile=armul.trc
;; Tracer options - what to trace
TraceInstructions=True
TraceOpcodeFetch=True
TraceRegisters=False
TraceMemory=True
;; WARNING ARMISS doesn't support TraceIdle or TraceNonAccounted.
TraceIdle=False
TraceNonAccounted=False
TraceEvents=False
TimeStamp=False
;; Where to trace memory - if not set, it will trace at the core.
;; WARNING - only core tracing is supported in ARMISS.
TraceBus=False
;; Flags - disassemble instructions; start up with tracing enabled;
Disassemble=False
StartOn=False
}
{ No_Tracer=Nothing
META_GUI_INTERFACE=Tracer
}

{ WatchDog
MODEL_DLL_FILENAME=Watchdog
META_GUI_INTERFACE=WatchDog
Waits=0
Range:Base=0xb0000000
KeyValue=0x12345678
WatchPeriod=0x80000
IRQPeriod=3000
IntNumber=16
StartOnReset=True
RunAfterBark=True
}
{ No_WatchDog=Nothing
META_GUI_INTERFACE=WatchDog
}


{ Profiler
MODEL_DLL_FILENAME=Profiler
META_GUI_INTERFACE=Profiler
;; For example - to profile the PC value when cache misses happen, set:
;Type=Event
;Event=0x00010001
;EventWord=pc
Type=Cycle
}
{No_Profiler=Nothing
META_GUI_INTERFACE=Profiler
}

;; Debug comms channel model checks if it's on a processor with ICE
;; The "Rate" parameter governs how often it tries to give data back
;; to the debugger, so models the real latency of a JTAG-based system.
{ DebugComms
MODEL_DLL_FILENAME=Dcc
META_GUI_INTERFACE=Dcc
Rate=76
ReadDelay=38
WriteDelay=108
MCCfg=15
; Whether RX and TX are wired up to IRQ/interrupt controller
IRQOnCommsChannel=False
; Interrupt priorities when using an interrupt controller
CommRXIRQNo=2
CommTXIRQNo=3
meta_moduleserver_component=DCC_CP14
}
{ No_DebugComms=Nothing
META_GUI_INTERFACE=Dcc
}


;; The StackUse model continually monitors the stack pointer and
;; reports the amount of stack used in $statistics. It needs to be
;; configured with the stack's location.
{ StackUse
MODEL_DLL_FILENAME=Stackuse
META_GUI_INTERFACE=Stackuse
StackBase=0x80000000
StackLimit=0x70000000
}
{ No_StackUse=Nothing
META_GUI_INTERFACE=Stackuse
}






{ Validate
MODEL_DLL_FILENAME=Validate
META_GUI_INTERFACE=ValidateCP
}
{ No_Validate=Nothing
META_GUI_INTERFACE=ValidateCP
}

{Semihost
MODEL_DLL_FILENAME=Semihost
META_GUI_INTERFACE=Semihost
ANGEL=True
AngelSWIARM=0x123456
AngelSWIThumb=0xab
; If TRUE, we halt when an Angel SWI is called with
; an unimplemented code in R0 - otherwise we just return -1.
HaltOnUnknownSysNumber=False

; Demon is only needed for validation.
DEMON=False
;Swi's 0x80 .. 0x9F are needed for Demon, so DEMON=True overrides
; EXIT_SWIS=False.
EXIT_SWIS=False
; And the default memory map
HeapBase=0x00000000
HeapLimit=0x07000000
StackBase=0x08000000
StackLimit=0x07000000

;; Demon configuration

;; Configure the locations of stacks, etc.
AddrSuperStack=0xa00
AddrAbortStack=0x800
AddrUndefStack=0x700
AddrIRQStack=0x500
AddrFIQStack=0x400

;; The default location of the user mode stack
AddrUserStack=0x80000

;; Start of the "soft vector" code
AddrSoftVectors=0xa40

;; Where to place a copy of the command line
AddrCmdLine=0xf00

;; Address and workspace for installed handlers
AddrsOfHandlers=0xad0

;; Default handlers
SoftVectorCode=0xb80

}
{No_Semihost=Nothing
META_GUI_INTERFACE=Semihost
}

{Timer
MODEL_DLL_FILENAME=Timer
META_GUI_INTERFACE=Timer
;Range=0x0a800000,0x0a80003f
Waits=0
Range:Base=0x0a800000
CLK=20000000
;; You MUST supply the MCCFG value for the processor
TicMCCfg=2
;; Interrupt controller source bits - 4 and 5 as standard
IntOne=4
IntTwo=5
;meta_moduleserver_component=RPS_Timer
}
{No_Timer=Nothing
META_GUI_INTERFACE=Timer
}

{IntCtrl
MODEL_DLL_FILENAME=Intc
META_GUI_INTERFACE=Intc
;Range=0x0a000000,0x0a00010c
Waits=0
Range:Base=0x0a000000
;meta_moduleserver_component=RPS_Interrupt_Controller
}
{No_IntCtrl=Nothing
META_GUI_INTERFACE=Intc
}

{Millisec
MODEL_DLL_FILENAME=Millisec
META_GUI_INTERFACE=Millisec
Range:Base=0x0bfffff0
}
{No_Millisec=Nothing
META_GUI_INTERFACE=Millisec
}


{Nothing
MODEL_DLL_FILENAME=Nothing
}

;This was formerly used for No_FPU
;{Empty=Nothing
;}

{Tube
MODEL_DLL_FILENAME=Tube
META_GUI_INTERFACE=Tube
;Range=0x0d800020,0x0d800023
;-obs-Range=0x03000000,0x03000004
Range:Base=0x0d800020
}
{ No_Tube=Nothing
META_GUI_INTERFACE=Tube
}


{RDIMSVR
MODEL_DLL_FILENAME=rdimsvr
target_controller_type=armulate
}

;This is really armmap.
{Bus
MODEL_DLL_FILENAME=Bus
}


; These are default values. Don't edit this file!
; Edit peripherals.ami to change pagetable setting

{ Pagetables
MODEL_DLL_FILENAME=Pagetab
META_GUI_INTERFACE=Pagetab
;The GUI should not offer this - the user is expected to
; prefer their settings in Default_Pagetables.
META_CONFIG_ABSTRACT
;
MMU=Yes
AlignFaults=No
Cache=Yes
WriteBuffer=Yes
Prog32=Yes
Data32=Yes
LateAbort=Yes
;; The following is set to the default setting of the processor core
;; (which is controlled from the command-line or configuration window).
;; Only uncomment if you wish to override that setting.
;BigEnd=
BranchPredict=Yes
ICache=Yes
HighExceptionVectors=No

PageTableBase=0xa0000000
DAC=0x00000001

;; Used by the 940 to control the clock mode. Use this flag
;; to configure the clock mode for the processor. If FastBus is enabled
;; fast bus mode will be used otherwise synchronous mode is used.
 
FastBus=No
; Don't turn these on until you have read an ARM966 manual, to avoid confusion.
; Normally you need code to initialise the contents of IRAM and DRAM.
IRAM=No
DRAM=No

{ Region[0]
VirtualBase=0
PhysicalBase=0
Size=4GB
Cacheable=Yes
Bufferable=Yes
Updateable=Yes
Domain=0
AccessPermissions=3
Translate=Yes
}

{ MPURegion[0]
PhysicalBase=0
Size=4GB
Cacheable=Yes
Bufferable=Yes
AccessPermissions=3
}


}
{ No_Pagetables=Nothing
META_GUI_INTERFACE=Pagetab
}


{Mapfile
META_GUI_INTERFACE=Mapfile
MODEL_DLL_FILENAME=Mapfile
CountWaitStates=False
AMBABusCounts=False
;SpotISCycles=True|False
SpotISCycles=False
;ISTiming=Late|Early|Speculative
ISTiming=Late
}

{No_Mapfile=Nothing
META_GUI_INTERFACE=Mapfile
}

{Codeseq
META_GUI_INTERFACE=Codeseq
MODEL_DLL_FILENAME=Codeseq
}

{SimabsMemCallback
META_GUI_INTERFACE=SimabsMemCallback
MODEL_DLL_FILENAME=SimabsMemCallback
}

{No_Codeseq
META_GUI_INTERFACE=Codeseq
MODEL_DLL_FILENAME=Nothing
}

{ Flatmem
MODEL_DLL_FILENAME=Flatmem
}


}
;End of Peripherals

;These are for use by Tracer.
{EventNumbers
 ;Data TLB or I TLB walk in mixed cache.
 MMUEvent_DTLBWalk=0x10004
 MMUEvent_ITLBWalk=0x10005
}


;; EOF peripherals.dsc