pubchars.ent

realview22.rar

below, you will get (non-fatal) mkbook errors, and the entity references will
not be replaced.

Finally, you may choose to define the entities below yourself, using a special
font that will be available to readers of your DynaText books. Use the same
SDATA entity declaration model as is used above, substituting the appropriate
names and decimal numbers for font, charset, code, and descr. In that case, you
should INCLUDE the marked section.

See Chapter 7 of Publisher Guide, Volume 1 for more information. -->

<![ INCLUDE [
<!ENTITY dlcorn   SDATA "support=0 descr='[dlcorn  ]'" --/llcorner O: lower left corner-->
<!ENTITY drcorn   SDATA "support=0 descr='[drcorn  ]'" --/lrcorner C: lower right corner-->
<!ENTITY gtlPar   SDATA "support=0 descr='[gtlPar  ]'" --dbl left parenthesis, greater-->
<!ENTITY langd    SDATA "support=0 descr='[langd   ]'" --left angle, dot-->
<!ENTITY lbrke    SDATA "support=0 descr='[lbrke   ]'" --left bracket, equal-->
<!ENTITY lbrksld  SDATA "support=0 descr='[lbrksld ]'" --left bracket, solidus bottom corner-->
<!ENTITY lbrkslu  SDATA "support=0 descr='[lbrkslu ]'" --left bracket, solidus top corner-->
<!ENTITY lceil    SDATA "support=0 descr='[lceil   ]'" --/lceil O: left ceiling-->
<!ENTITY lfloor   SDATA "support=0 descr='[lfloor  ]'" --/lfloor O: left floor-->
<!ENTITY lmoust   SDATA "support=0 descr='[lmoust  ]'" --/lmoustache-->
<!ENTITY lparlt   SDATA "support=0 descr='[lparlt  ]'" --O: left parenthesis, lt-->
<!ENTITY ltrPar   SDATA "support=0 descr='[ltrPar  ]'" --dbl right parenthesis, less-->
<!ENTITY rangd    SDATA "support=0 descr='[rangd   ]'" --right angle, dot-->
<!ENTITY rbrke    SDATA "support=0 descr='[rbrke   ]'" --right bracket, equal-->
<!ENTITY rbrksld  SDATA "support=0 descr='[rbrksld ]'" --right bracket, solidus bottom corner-->
<!ENTITY rbrkslu  SDATA "support=0 descr='[rbrkslu ]'" --right bracket, solidus top corner-->
<!ENTITY rceil    SDATA "support=0 descr='[rceil   ]'" --/rceil C: right ceiling-->
<!ENTITY rfloor   SDATA "support=0 descr='[rfloor  ]'" --/rfloor C: right floor-->
<!ENTITY rmoust   SDATA "support=0 descr='[rmoust  ]'" --/rmoustache-->
<!ENTITY rpargt   SDATA "support=0 descr='[rpargt  ]'" --C: right paren, gt-->
<!ENTITY ulcorn   SDATA "support=0 descr='[ulcorn  ]'" --/ulcorner O: upper left corner-->
<!ENTITY urcorn   SDATA "support=0 descr='[urcorn  ]'" --/urcorner C: upper right corner-->
]]>
<!-- (C) International Organization for Standardization 1991
     Permission to copy in any form is granted for use with
     conforming SGML systems and applications as defined in
     ISO 8879, provided this notice is included in all copies.
-->
<!-- Character entity set. Typical invocation:
     <!ENTITY % ISOAMSN  PUBLIC
       "ISO 9573-13:1991//ENTITIES Added Math Symbols: Negated Relations //EN">
     %ISOAMSN;
-->

<!-- The following characters could not be defined using commonly available
fonts. Therefore, EBT is using placeholders for these characters. To include
the placeholders in your document, make sure that the marked section below has
the keyword "INCLUDE".

To ignore the placeholders, use the keyword "IGNORE". If you are ignoring this
marked section and your SGML document references any of the entities declared
below, you will get (non-fatal) mkbook errors, and the entity references will
not be replaced.

Finally, you may choose to define the entities below yourself, using a special
font that will be available to readers of your DynaText books. Use the same
SDATA entity declaration model as is used above, substituting the appropriate
names and decimal numbers for font, charset, code, and descr. In that case, you
should INCLUDE the marked section.

See Chapter 7 of Publisher Guide, Volume 1 for more information. -->

<![ INCLUDE [
<!ENTITY gnap     SDATA "support=0 descr='[gnap    ]'" --/gnapprox N: greater, not approximate-->
<!ENTITY gne      SDATA "support=0 descr='[gne     ]'" --/gneq N: greater, not equals-->
<!ENTITY gnE      SDATA "support=0 descr='[gnE     ]'" --/gneqq N: greater, not dbl equals-->
<!ENTITY gnsim    SDATA "support=0 descr='[gnsim   ]'" --/gnsim N: greater, not similar-->
<!ENTITY gvnE     SDATA "support=0 descr='[gvnE    ]'" --/gvertneqq N: gt, vert, not dbl eq-->
<!ENTITY lnap     SDATA "support=0 descr='[lnap    ]'" --/lnapprox N: less, not approximate-->
<!ENTITY lne      SDATA "support=0 descr='[lne     ]'" --/lneq N: less, not equals-->
<!ENTITY lnE      SDATA "support=0 descr='[lnE     ]'" --/lneqq N: less, not double equals-->
<!ENTITY lnsim    SDATA "support=0 descr='[lnsim   ]'" --/lnsim N: less, not similar-->
<!ENTITY lvnE     SDATA "support=0 descr='[lvnE    ]'" --/lvertneqq N: less, vert, not dbl eq-->
<!ENTITY nap      SDATA "support=0 descr='[nap     ]'" --/napprox N: not approximate-->
<!ENTITY napE     SDATA "support=0 descr='[napE    ]'" --not approximately equal or equal to-->
<!ENTITY napid    SDATA "support=0 descr='[napid   ]'" --not approximately identical to-->
<!ENTITY ncong    SDATA "support=0 descr='[ncong   ]'" --/ncong N: not congruent with-->
<!ENTITY ncongdot SDATA "support=0 descr='[ncongdot]'" --not congruent, dot-->
<!ENTITY nequiv   SDATA "support=0 descr='[nequiv  ]'" --/nequiv N: not identical with-->
<!ENTITY nge      SDATA "support=0 descr='[nge     ]'" --/ngeq N: not greater-than-or-equal-->
<!ENTITY ngE      SDATA "support=0 descr='[ngE     ]'" --/ngeqq N: not greater, dbl equals-->
<!ENTITY nges     SDATA "support=0 descr='[nges    ]'" --/ngeqslant N: not gt-or-eq, slanted-->
<!ENTITY nGg      SDATA "support=0 descr='[nGg     ]'" --not triple greater than-->
<!ENTITY ngsim    SDATA "support=0 descr='[ngsim   ]'" --not greater, similar-->
<!ENTITY ngt      SDATA "support=0 descr='[ngt     ]'" --/ngtr N: not greater-than-->
<!ENTITY nGt      SDATA "support=0 descr='[nGt     ]'" --not, vert, much greater than-->
<!ENTITY nGtv     SDATA "support=0 descr='[nGtv    ]'" --not much greater than, variant-->
<!ENTITY nle      SDATA "support=0 descr='[nle     ]'" --/nleq N: not less-than-or-equal-->
<!ENTITY nlE      SDATA "support=0 descr='[nlE     ]'" --/nleqq N: not less, dbl equals-->
<!ENTITY nles     SDATA "support=0 descr='[nles    ]'" --/nleqslant N: not less-or-eq, slant-->
<!ENTITY nLl      SDATA "support=0 descr='[nLl     ]'" --not triple less than-->
<!ENTITY nlsim    SDATA "support=0 descr='[nlsim   ]'" --not less, similar-->
<!ENTITY nlt      SDATA "support=0 descr='[nlt     ]'" --/nless N: not less-than-->
<!ENTITY nLt      SDATA "support=0 descr='[nLt     ]'" --not, vert, much less than-->
<!ENTITY nltri    SDATA "support=0 descr='[nltri   ]'" --/ntriangleleft N: not left triangle-->
<!ENTITY nltrie   SDATA "support=0 descr='[nltrie  ]'" --/ntrianglelefteq N: not l tri, eq-->
<!ENTITY nLtv     SDATA "support=0 descr='[nLtv    ]'" --not much less than, variant-->
<!ENTITY nmid     SDATA "support=0 descr='[nmid    ]'" --/nmid-->
<!ENTITY npar     SDATA "support=0 descr='[npar    ]'" --/nparallel N: not parallel-->
<!ENTITY npr      SDATA "support=0 descr='[npr     ]'" --/nprec N: not precedes-->
<!ENTITY nprcue   SDATA "support=0 descr='[nprcue  ]'" --not curly precedes, eq-->
<!ENTITY npre     SDATA "support=0 descr='[npre    ]'" --/npreceq N: not precedes, equals-->
<!ENTITY nrtri    SDATA "support=0 descr='[nrtri   ]'" --/ntriangleright N: not rt triangle-->
<!ENTITY nrtrie   SDATA "support=0 descr='[nrtrie  ]'" --/ntrianglerighteq N: not r tri, eq-->
<!ENTITY nsc      SDATA "support=0 descr='[nsc     ]'" --/nsucc N: not succeeds-->
<!ENTITY nsccue   SDATA "support=0 descr='[nsccue  ]'" --not succeeds, curly eq-->
<!ENTITY nsce     SDATA "support=0 descr='[nsce    ]'" --/nsucceq N: not succeeds, equals-->
<!ENTITY nsim     SDATA "support=0 descr='[nsim    ]'" --/nsim N: not similar-->
<!ENTITY nsime    SDATA "support=0 descr='[nsime   ]'" --/nsimeq N: not similar, equals-->
<!ENTITY nsmid    SDATA "support=0 descr='[nsmid   ]'" --/nshortmid-->
<!ENTITY nspar    SDATA "support=0 descr='[nspar   ]'" --/nshortparallel N: not short par-->
<!ENTITY nsqsube  SDATA "support=0 descr='[nsqsube ]'" --not, square subset, equals-->
<!ENTITY nsqsupe  SDATA "support=0 descr='[nsqsupe ]'" --not, square superset, equals-->
<!ENTITY nsub    	SDATA "font=symbol charset=fontspecific code=203">
<!ENTITY nsube    SDATA "support=0 descr='[nsube   ]'" --/nsubseteq N: not subset, equals-->
<!ENTITY nsubE    SDATA "support=0 descr='[nsubE   ]'" --/nsubseteqq N: not subset, dbl eq-->
<!ENTITY nsup     SDATA "support=0 descr='[nsup    ]'" --not superset-->
<!ENTITY nsupe    SDATA "support=0 descr='[nsupe   ]'" --/nsupseteq N: not superset, equals-->
<!ENTITY nsupE    SDATA "support=0 descr='[nsupE   ]'" --/nsupseteqq N: not superset, dbl eq-->
<!ENTITY ntgl     SDATA "support=0 descr='[ntgl    ]'" --not greater, less-->
<!ENTITY ntlg     SDATA "support=0 descr='[ntlg    ]'" --not less, greater-->
<!ENTITY nvap     SDATA "support=0 descr='[nvap    ]'" --not, vert, approximate-->
<!ENTITY nvdash   SDATA "support=0 descr='[nvdash  ]'" --/nvdash N: not vertical, dash-->
<!ENTITY nvDash   SDATA "support=0 descr='[nvDash  ]'" --/nvDash N: not vertical, dbl dash-->
<!ENTITY nVdash   SDATA "support=0 descr='[nVdash  ]'" --/nVdash N: not dbl vertical, dash-->
<!ENTITY nVDash   SDATA "support=0 descr='[nVDash  ]'" --/nVDash N: not dbl vert, dbl dash-->
<!ENTITY nvge     SDATA "support=0 descr='[nvge    ]'" --not, vert, greater-than-or-equal-->
<!ENTITY nvgt     SDATA "support=0 descr='[nvgt    ]'" --not, vert, greater-than-->
<!ENTITY nvle     SDATA "support=0 descr='[nvle    ]'" --not, vert, less-than-or-equal-->
<!ENTITY nvlt     SDATA "support=0 descr='[nvlt    ]'" --not, vert, less-than-->
<!ENTITY nvltrie  SDATA "support=0 descr='[nvltrie ]'" --not, vert, left triangle, equals-->
<!ENTITY nvrtrie  SDATA "support=0 descr='[nvrtrie ]'" --not, vert, right triangle, equals-->
<!ENTITY nvsim    SDATA "support=0 descr='[nvsim   ]'" --not, vert, similar-->
<!ENTITY parsim   SDATA "support=0 descr='[parsim  ]'" --parallel, similar-->
<!ENTITY prnap    SDATA "support=0 descr='[prnap   ]'" --/precnapprox N: precedes, not approx-->
<!ENTITY prnE     SDATA "support=0 descr='[prnE    ]'" --/precneqq N: precedes, not dbl eq-->
<!ENTITY prnsim   SDATA "support=0 descr='[prnsim  ]'" --/precnsim N: precedes, not similar-->
<!ENTITY rnmid    SDATA "support=0 descr='[rnmid   ]'" --reverse /nmid-->
<!ENTITY scnap    SDATA "support=0 descr='[scnap   ]'" --/succnapprox N: succeeds, not approx-->
<!ENTITY scnE     SDATA "support=0 descr='[scnE    ]'" --/succneqq N: succeeds, not dbl eq-->
<!ENTITY scnsim   SDATA "support=0 descr='[scnsim  ]'" --/succnsim N: succeeds, not similar-->
<!ENTITY simne    SDATA "support=0 descr='[simne   ]'" --similar, not equals-->
<!ENTITY solbar   SDATA "support=0 descr='[solbar  ]'" --solidus, bar through-->
<!ENTITY subne    SDATA "support=0 descr='[subne   ]'" --/subsetneq N: subset, not equals-->
<!ENTITY subnE    SDATA "support=0 descr='[subnE   ]'" --/subsetneqq N: subset, not dbl eq-->
<!ENTITY supne    SDATA "support=0 descr='[supne   ]'" --/supsetneq N: superset, not equals-->
<!ENTITY supnE    SDATA "support=0 descr='[supnE   ]'" --/supsetneqq N: superset, not dbl eq-->
<!ENTITY vnsub    SDATA "support=0 descr='[vnsub   ]'" --/nsubset N: not subset, var-->
<!ENTITY vnsup    SDATA "support=0 descr='[vnsup   ]'" --/nsupset N: not superset, var-->
<!ENTITY vsubne   SDATA "support=0 descr='[vsubne  ]'" --/varsubsetneq N: subset, not eq, var-->
<!ENTITY vsubnE   SDATA "support=0 descr='[vsubnE  ]'" --/varsubsetneqq N: subset not dbl eq, var-->
<!ENTITY vsupne   SDATA "support=0 descr='[vsupne  ]'" --/varsupsetneq N: superset, not eq, var-->
<!ENTITY vsupnE   SDATA "support=0 descr='[vsupnE  ]'" --/varsupsetneqq N: super not dbl eq, var-->
]]>
<!-- (C) International Organization for Standardization 1991
     Permission to copy in any form is granted for use with
     conforming SGML systems and applications as defined in
     ISO 8879, provided this notice is included in all copies.
-->
<!-- Character entity set. Typical invocation:
     <!ENTITY % ISOAMSO  PUBLIC
       "ISO 9573-13:1991//ENTITIES Added Math Symbols: Ordinary //EN">
     %ISOAMSO;
-->

<!-- The following characters could not be defined using commonly available
fonts. Therefore, EBT is using placeholders for these characters. To include
the placeholders in your document, make sure that the marked section below has
the keyword "INCLUDE".

To ignore the placeholders, use the keyword "IGNORE". If you are ignoring this