⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 xprt.h

📁 linux-2.4.29操作系统的源码
💻 H
字号:
/* *  linux/include/linux/sunrpc/clnt_xprt.h * *  Declarations for the RPC transport interface. * *  Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de> */#ifndef _LINUX_SUNRPC_XPRT_H#define _LINUX_SUNRPC_XPRT_H#include <linux/uio.h>#include <linux/socket.h>#include <linux/in.h>#include <linux/sunrpc/sched.h>#include <linux/sunrpc/xdr.h>/* * The transport code maintains an estimate on the maximum number of out- * standing RPC requests, using a smoothed version of the congestion * avoidance implemented in 44BSD. This is basically the Van Jacobson * congestion algorithm: If a retransmit occurs, the congestion window is * halved; otherwise, it is incremented by 1/cwnd when * *	-	a reply is received and *	-	a full number of requests are outstanding and *	-	the congestion window hasn't been updated recently. * * Upper procedures may check whether a request would block waiting for * a free RPC slot by using the RPC_CONGESTED() macro. * * Note: on machines with low memory we should probably use a smaller * MAXREQS value: At 32 outstanding reqs with 8 megs of RAM, fragment * reassembly will frequently run out of memory. */#define RPC_MAXCONG		(16)#define RPC_MAXREQS		RPC_MAXCONG#define RPC_CWNDSCALE		(256)#define RPC_MAXCWND		(RPC_MAXCONG * RPC_CWNDSCALE)#define RPC_INITCWND		RPC_CWNDSCALE#define RPCXPRT_CONGESTED(xprt) ((xprt)->cong >= (xprt)->cwnd)/* Default timeout values */#define RPC_MAX_UDP_TIMEOUT	(60*HZ)#define RPC_MAX_TCP_TIMEOUT	(600*HZ)/* *  * Wait duration for an RPC TCP connection to be established.  Solaris *   * NFS over TCP uses 60 seconds, for example, which is in line with how *    * long a server takes to reboot. *     */#define RPC_CONNECT_TIMEOUT	(60*HZ)/* *  * Delay an arbitrary number of seconds before attempting to reconnect *   * after an error. *    */#define RPC_REESTABLISH_TIMEOUT	(15*HZ)/* RPC call and reply header size as number of 32bit words (verifier * size computed separately) */#define RPC_CALLHDRSIZE		6#define RPC_REPHDRSIZE		4/* * This describes a timeout strategy */struct rpc_timeout {	unsigned long		to_current,		/* current timeout */				to_initval,		/* initial timeout */				to_maxval,		/* max timeout */				to_increment;		/* if !exponential */	short			to_retries;		/* max # of retries */	unsigned char		to_exponential;};/* * This describes a complete RPC request */struct rpc_rqst {	/*	 * This is the user-visible part	 */	struct rpc_xprt *	rq_xprt;		/* RPC client */	struct rpc_timeout	rq_timeout;		/* timeout parms */	struct xdr_buf		rq_snd_buf;		/* send buffer */	struct xdr_buf		rq_rcv_buf;		/* recv buffer */	/*	 * This is the private part	 */	struct rpc_task *	rq_task;	/* RPC task data */	__u32			rq_xid;		/* request XID */	struct rpc_rqst *	rq_next;	/* free list */	int			rq_cong;	/* has incremented xprt->cong */	int			rq_received;	/* receive completed */	struct list_head	rq_list;	struct xdr_buf		rq_private_buf;		/* The receive buffer							 * used in the softirq.							 */	/*	 * For authentication (e.g. auth_des)	 */	u32			rq_creddata[2];		/*	 * Partial send handling	 */		u32			rq_bytes_sent;	/* Bytes we have sent */	long			rq_xtime;	/* when transmitted */	int			rq_ntimeo;	int			rq_ntrans;};#define rq_svec			rq_snd_buf.head#define rq_slen			rq_snd_buf.len#define rq_rvec			rq_rcv_buf.head#define rq_rlen			rq_rcv_buf.len#define XPRT_LAST_FRAG		(1 << 0)#define XPRT_COPY_RECM		(1 << 1)#define XPRT_COPY_XID		(1 << 2)#define XPRT_COPY_DATA		(1 << 3)struct rpc_xprt {	struct socket *		sock;		/* BSD socket layer */	struct sock *		inet;		/* INET layer */	struct rpc_timeout	timeout;	/* timeout parms */	struct sockaddr_in	addr;		/* server address */	int			prot;		/* IP protocol */	unsigned long		cong;		/* current congestion */	unsigned long		cwnd;		/* congestion window */	unsigned int		rcvsize,	/* socket receive buffer size */				sndsize;	/* socket send buffer size */	struct rpc_wait_queue	sending;	/* requests waiting to send */	struct rpc_wait_queue	resend;		/* requests waiting to resend */	struct rpc_wait_queue	pending;	/* requests in flight */	struct rpc_wait_queue	backlog;	/* waiting for slot */	struct rpc_rqst *	free;		/* free slots */	struct rpc_rqst		slot[RPC_MAXREQS];	unsigned long		sockstate;	/* Socket state */	unsigned char		shutdown   : 1,	/* being shut down */				nocong	   : 1,	/* no congestion control */				resvport   : 1, /* use a reserved port */				stream     : 1;	/* TCP */	/*	 * State of TCP reply receive stuff	 */	u32			tcp_recm,	/* Fragment header */				tcp_xid,	/* Current XID */				tcp_reclen,	/* fragment length */				tcp_offset;	/* fragment offset */	unsigned long		tcp_copied,	/* copied to request */				tcp_flags;	/*	 * Send stuff	 */	spinlock_t		sock_lock;	/* lock socket info */	spinlock_t		xprt_lock;	/* lock xprt info */	struct rpc_task *	snd_task;	/* Task blocked in send */	struct list_head	recv;	void			(*old_data_ready)(struct sock *, int);	void			(*old_state_change)(struct sock *);	void			(*old_write_space)(struct sock *);	wait_queue_head_t	cong_wait;};#ifdef __KERNEL__struct rpc_xprt *	xprt_create_proto(int proto, struct sockaddr_in *addr,					struct rpc_timeout *toparms);int			xprt_destroy(struct rpc_xprt *);void			xprt_shutdown(struct rpc_xprt *);void			xprt_default_timeout(struct rpc_timeout *, int);void			xprt_set_timeout(struct rpc_timeout *, unsigned int,					unsigned long);void			xprt_reserve(struct rpc_task *);void			xprt_transmit(struct rpc_task *);void			xprt_receive(struct rpc_task *);int			xprt_adjust_timeout(struct rpc_timeout *);void			xprt_release(struct rpc_task *);void			xprt_connect(struct rpc_task *);int			xprt_clear_backlog(struct rpc_xprt *);void			xprt_sock_setbufsize(struct rpc_xprt *);#define XPRT_CONNECT	0#define xprt_connected(xp)		(test_bit(XPRT_CONNECT, &(xp)->sockstate))#define xprt_set_connected(xp)		(set_bit(XPRT_CONNECT, &(xp)->sockstate))#define xprt_test_and_set_connected(xp)	(test_and_set_bit(XPRT_CONNECT, &(xp)->sockstate))#define xprt_clear_connected(xp)	(clear_bit(XPRT_CONNECT, &(xp)->sockstate))#endif /* __KERNEL__*/#endif /* _LINUX_SUNRPC_XPRT_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -