⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ibm_ocp_debug.c

📁 linux-2.4.29操作系统的源码
💻 C
字号:
/* * ibm_ocp_debug.c * * This has all the debug routines that where in *_enet.c * *      Armin Kuster akuster@mvista.com *      April , 2002 * * Copyright 2002 MontaVista Softare Inc. * * This program is free software; you can redistribute  it and/or modify it *  under  the terms of  the GNU General  Public License as published by the *  Free Software Foundation;  either version 2 of the  License, or (at your *  option) any later version. * *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR   IMPLIED *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT,  INDIRECT, *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *  You should have received a copy of the  GNU General Public License along *  with this program; if not, write  to the Free Software Foundation, Inc., *  675 Mass Ave, Cambridge, MA 02139, USA. * * TODO:  * * Version 1.0: (04/15/02) * 	initial release  * 	These are all the debug routines from *_enet.c and a few new ones.  * 	this was done to reduce the *_enet.c code. * * Version 1.1: 04/24/02 * 	fixed missind EMAC_DEV macros - Todd * */#include <linux/config.h>#include <linux/kernel.h>#include <linux/netdevice.h>#include <asm/io.h>#include "ibm_ocp_mal.h"#include "ibm_ocp_zmii.h"#include "ibm_ocp_enet.h"extern intemac_phy_read(struct net_device *dev, int mii_id, int reg);void emac_phy_dump(struct net_device *dev){	struct ocp_enet_private *fep = dev->priv;	unsigned long i;	uint data;	printk(KERN_DEBUG " Prepare for Phy dump....\n");	for (i = 0; i < 0x1A; i++) {	        data = emac_phy_read(dev, fep->mii_phy_addr, i);		printk(KERN_DEBUG "Phy reg 0x%lx ==> %4x\n", i, data);		if (i == 0x07)			i = 0x0f;	}}voidemac_desc_dump(struct net_device *dev){	struct ocp_enet_private *fep = dev->priv;	int curr_slot;	printk(KERN_DEBUG "dumping the receive descriptors:  current slot is %d\n",	       fep->rx_slot);	for (curr_slot = 0; curr_slot < NUM_RX_BUFF; curr_slot++) {		printk(KERN_DEBUG "Desc %02d: status 0x%04x, length %3d, addr 0x%x\n",		       curr_slot,		       fep->rx_desc[curr_slot].ctrl,		       fep->rx_desc[curr_slot].data_len,		       (unsigned int) fep->rx_desc[curr_slot].data_ptr);	}}voidemac_mac_dump(struct net_device *dev){	struct ocp_enet_private *fep = dev->priv;	volatile emac_t *emacp = fep->emacp;	printk(KERN_DEBUG "EMAC DEBUG ********** \n");	printk(KERN_DEBUG "EMAC_M0  ==> 0x%x\n", in_be32(&emacp->em0mr0));	printk(KERN_DEBUG "EMAC_M1  ==> 0x%x\n", in_be32(&emacp->em0mr1));	printk(KERN_DEBUG "EMAC_TXM0==> 0x%x\n", in_be32(&emacp->em0tmr0));	printk(KERN_DEBUG "EMAC_TXM1==> 0x%x\n", in_be32(&emacp->em0tmr1));	printk(KERN_DEBUG "EMAC_RXM ==> 0x%x\n", in_be32(&emacp->em0rmr));	printk(KERN_DEBUG "EMAC_ISR ==> 0x%x\n", in_be32(&emacp->em0isr));	printk(KERN_DEBUG "EMAC_IER ==> 0x%x\n", in_be32(&emacp->em0iser));	printk(KERN_DEBUG "EMAC_IAH ==> 0x%x\n", in_be32(&emacp->em0iahr));	printk(KERN_DEBUG "EMAC_IAL ==> 0x%x\n", in_be32(&emacp->em0ialr));	printk(KERN_DEBUG "EMAC_VLAN_TPID_REG ==> 0x%x\n", in_be32(&emacp->em0vtpid));}voidemac_mal_dump(struct net_device *dev){	struct ibm_ocp_mal* mal = ((struct ocp_enet_private*)dev->priv)->mal;	printk(KERN_DEBUG " MAL DEBUG ********** \n");	printk(KERN_DEBUG " MCR      ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALCR));	printk(KERN_DEBUG " ESR      ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALESR));	printk(KERN_DEBUG " IER      ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALIER));#ifdef CONFIG_40x	printk(KERN_DEBUG " DBR      ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALDBR));#endif				/* CONFIG_40x */	printk(KERN_DEBUG " TXCASR   ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALTXCASR));	printk(KERN_DEBUG " TXCARR   ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALTXCARR));	printk(KERN_DEBUG " TXEOBISR ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALTXEOBISR));	printk(KERN_DEBUG " TXDEIR   ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALTXDEIR));	printk(KERN_DEBUG " RXCASR   ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALRXCASR));	printk(KERN_DEBUG " RXCARR   ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALRXCARR));	printk(KERN_DEBUG " RXEOBISR ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALRXEOBISR));	printk(KERN_DEBUG " RXDEIR   ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALRXDEIR));	printk(KERN_DEBUG " TXCTP0R  ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALTXCTP0R));	printk(KERN_DEBUG " TXCTP1R  ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALTXCTP1R));	printk(KERN_DEBUG " TXCTP2R  ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALTXCTP2R));	printk(KERN_DEBUG " TXCTP3R  ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALTXCTP3R));	printk(KERN_DEBUG " RXCTP0R  ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALRXCTP0R));	printk(KERN_DEBUG " RXCTP1R  ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALRXCTP1R));	printk(KERN_DEBUG " RCBS0    ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALRCBS0));	printk(KERN_DEBUG " RCBS1    ==> 0x%x\n", 	       (unsigned int) get_mal_dcrn(mal, DCRN_MALRCBS1));}voidemac_serr_dump_0(struct net_device *dev){	struct ibm_ocp_mal* mal = ((struct ocp_enet_private*)dev->priv)->mal;	unsigned long int mal_error, plb_error, plb_addr;	mal_error = get_mal_dcrn(mal, DCRN_MALESR);	printk(KERN_DEBUG "ppc405_eth_serr: %s channel %ld \n",	       (mal_error & 0x40000000) ? "Receive" :	       "Transmit", (mal_error & 0x3e000000) >> 25);	printk(KERN_DEBUG "  -----  latched error  -----\n");	if (mal_error & MALESR_DE)		printk(KERN_DEBUG "  DE: descriptor error\n");	if (mal_error & MALESR_OEN)		printk(KERN_DEBUG		       "  ONE: OPB non-fullword error\n");	if (mal_error & MALESR_OTE)		printk(KERN_DEBUG "  OTE: OPB timeout error\n");	if (mal_error & MALESR_OSE)		printk(KERN_DEBUG "  OSE: OPB slave error\n");		if (mal_error & MALESR_PEIN) {		plb_error = mfdcr(DCRN_PLB0_BESR);		printk(KERN_DEBUG		       "  PEIN: PLB error, PLB0_BESR is 0x%x\n",		       (unsigned int) plb_error);		plb_addr = mfdcr(DCRN_PLB0_BEAR);		printk(KERN_DEBUG		       "  PEIN: PLB error, PLB0_BEAR is 0x%x\n",		       (unsigned int) plb_addr);	}}voidemac_serr_dump_1(struct net_device *dev){	struct ibm_ocp_mal* mal = ((struct ocp_enet_private*)dev->priv)->mal;	int mal_error = get_mal_dcrn(mal, DCRN_MALESR);	printk(KERN_DEBUG "  -----  cumulative errors  -----\n");	if (mal_error & MALESR_DEI)		printk(KERN_DEBUG		       "  DEI: descriptor error interrupt\n");	if (mal_error & MALESR_ONEI)		printk(KERN_DEBUG		       "  OPB non-fullword error interrupt\n");	if (mal_error & MALESR_OTEI)		printk(KERN_DEBUG		       "  OTEI: timeout error interrupt\n");	if (mal_error & MALESR_OSEI)		printk(KERN_DEBUG		       "  OSEI: slave error interrupt\n");	if (mal_error & MALESR_PBEI)		printk(KERN_DEBUG		       "  PBEI: PLB bus error interrupt\n");}voidemac_err_dump(struct net_device *dev, int em0isr){	printk(KERN_DEBUG "%s: on-chip ethernet error:\n", dev->name);		if (em0isr & EMAC_ISR_OVR)		printk(KERN_DEBUG "  OVR: overrun\n");	if (em0isr & EMAC_ISR_PP)		printk(KERN_DEBUG "  PP: control pause packet\n");	if (em0isr & EMAC_ISR_BP)		printk(KERN_DEBUG "  BP: packet error\n");	if (em0isr & EMAC_ISR_RP)		printk(KERN_DEBUG "  RP: runt packet\n");	if (em0isr & EMAC_ISR_SE)		printk(KERN_DEBUG "  SE: short event\n");	if (em0isr & EMAC_ISR_ALE)		printk(KERN_DEBUG		       "  ALE: odd number of nibbles in packet\n");	if (em0isr & EMAC_ISR_BFCS)		printk(KERN_DEBUG "  BFCS: bad FCS\n");	if (em0isr & EMAC_ISR_PTLE)		printk(KERN_DEBUG "  PTLE: oversized packet\n");	if (em0isr & EMAC_ISR_ORE)		printk(KERN_DEBUG		       "  ORE: packet length field > max allowed LLC\n");	if (em0isr & EMAC_ISR_IRE)		printk(KERN_DEBUG "  IRE: In Range error\n");	if (em0isr & EMAC_ISR_DBDM)		printk(KERN_DEBUG "  DBDM: xmit error or SQE\n");	if (em0isr & EMAC_ISR_DB0)		printk(KERN_DEBUG		       "  DB0: xmit error or SQE on TX channel 0\n");	if (em0isr & EMAC_ISR_SE0)		printk(KERN_DEBUG		       "  SE0: Signal Quality Error test failure from TX channel 0\n");	if (em0isr & EMAC_ISR_TE0)		printk(KERN_DEBUG "  TE0: xmit channel 0 aborted\n");	if (em0isr & EMAC_ISR_DB1)		printk(KERN_DEBUG		       "  DB1: xmit error or SQE on TX channel \n");	if (em0isr & EMAC_ISR_SE1)		printk(KERN_DEBUG		       "  SE1: Signal Quality Error test failure from TX channel 1\n");	if (em0isr & EMAC_ISR_TE1)		printk(KERN_DEBUG "  TE1: xmit channel 1 aborted\n");	if (em0isr & EMAC_ISR_MOS)		printk(KERN_DEBUG "  MOS\n");	if (em0isr & EMAC_ISR_MOF)		printk(KERN_DEBUG "  MOF\n");		emac_mac_dump(dev);	emac_mal_dump(dev);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -