skge.c

linux-2.4.29操作系统的源码

/******************************************************************************
 *
 * Name:	skge.c
 * Project:	GEnesis, PCI Gigabit Ethernet Adapter
 * Version:	$Revision: 1.43 $
 * Date:       	$Date: 2004/01/29 15:47:07 $
 * Purpose:	The main driver source module
 *
 ******************************************************************************/

/******************************************************************************
 *
 *	(C)Copyright 1998-2002 SysKonnect GmbH.
 *	(C)Copyright 2002-2003 Marvell.
 *
 *	Driver for Marvell Yukon chipset and SysKonnect Gigabit Ethernet 
 *      Server Adapters.
 *
 *	Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and
 *	SysKonnects GEnesis Solaris driver
 *	Author: Christoph Goos ([e-mail])
 *	        Mirko Lindner ([e-mail])
 *
 *	Address all question to: [e-mail]
 *
 *	The technical manual for the adapters is available from SysKonnect's
 *	web pages: www.syskonnect.com
 *	Goto "Support" and search Knowledge Base for "manual".
 *	
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *
 *	The information in this file is provided "AS IS" without warranty.
 *
 ******************************************************************************/

/******************************************************************************
 *
 * Possible compiler options (#define xxx / -Dxxx):
 *
 *	debugging can be enable by changing SK_DEBUG_CHKMOD and
 *	SK_DEBUG_CHKCAT in makefile (described there).
 *
 ******************************************************************************/

/******************************************************************************
 *
 * Description:
 *
 *	This is the main module of the Linux GE driver.
 *	
 *	All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h
 *	are part of SysKonnect's COMMON MODULES for the SK-98xx adapters.
 *	Those are used for drivers on multiple OS', so some thing may seem
 *	unnecessary complicated on Linux. Please do not try to 'clean up'
 *	them without VERY good reasons, because this will make it more
 *	difficult to keep the Linux driver in synchronisation with the
 *	other versions.
 *
 * Include file hierarchy:
 *
 *	<linux/module.h>
 *
 *	"h/skdrv1st.h"
 *		<linux/types.h>
 *		<linux/kernel.h>
 *		<linux/string.h>
 *		<linux/errno.h>
 *		<linux/ioport.h>
 *		<linux/slab.h>
 *		<linux/interrupt.h>
 *		<linux/pci.h>
 *		<asm/byteorder.h>
 *		<asm/bitops.h>
 *		<asm/io.h>
 *		<linux/netdevice.h>
 *		<linux/etherdevice.h>
 *		<linux/skbuff.h>
 *	    those three depending on kernel version used:
 *		<linux/bios32.h>
 *		<linux/init.h>
 *		<asm/uaccess.h>
 *		<net/checksum.h>
 *
 *		"h/skerror.h"
 *		"h/skdebug.h"
 *		"h/sktypes.h"
 *		"h/lm80.h"
 *		"h/xmac_ii.h"
 *
 *      "h/skdrv2nd.h"
 *		"h/skqueue.h"
 *		"h/skgehwt.h"
 *		"h/sktimer.h"
 *		"h/ski2c.h"
 *		"h/skgepnmi.h"
 *		"h/skvpd.h"
 *		"h/skgehw.h"
 *		"h/skgeinit.h"
 *		"h/skaddr.h"
 *		"h/skgesirq.h"
 *		"h/skcsum.h"
 *		"h/skrlmt.h"
 *
 ******************************************************************************/

#include	"h/skversion.h"

#include	<linux/module.h>
#include	<linux/init.h>

#ifdef CONFIG_PROC_FS
#include 	<linux/proc_fs.h>
#endif

#include	"h/skdrv1st.h"
#include	"h/skdrv2nd.h"

/*******************************************************************************
 *
 * Defines
 *
 ******************************************************************************/

/* for debuging on x86 only */
/* #define BREAKPOINT() asm(" int $3"); */

/* use the transmit hw checksum driver functionality */
#define USE_SK_TX_CHECKSUM

/* use the receive hw checksum driver functionality */
#define USE_SK_RX_CHECKSUM

/* use the scatter-gather functionality with sendfile() */
#define SK_ZEROCOPY

/* use of a transmit complete interrupt */
#define USE_TX_COMPLETE

/*
 * threshold for copying small receive frames
 * set to 0 to avoid copying, set to 9001 to copy all frames
 */
#define SK_COPY_THRESHOLD	50

/* number of adapters that can be configured via command line params */
#define SK_MAX_CARD_PARAM	16



/*
 * use those defines for a compile-in version of the driver instead
 * of command line parameters
 */
// #define LINK_SPEED_A	{"Auto", }
// #define LINK_SPEED_B	{"Auto", }
// #define AUTO_NEG_A	{"Sense", }
// #define AUTO_NEG_B	{"Sense", }
// #define DUP_CAP_A	{"Both", }
// #define DUP_CAP_B	{"Both", }
// #define FLOW_CTRL_A	{"SymOrRem", }
// #define FLOW_CTRL_B	{"SymOrRem", }
// #define ROLE_A	{"Auto", }
// #define ROLE_B	{"Auto", }
// #define PREF_PORT	{"A", }
// #define CON_TYPE 	{"Auto", }
// #define RLMT_MODE	{"CheckLinkState", }

#define DEV_KFREE_SKB(skb) dev_kfree_skb(skb)
#define DEV_KFREE_SKB_IRQ(skb) dev_kfree_skb_irq(skb)
#define DEV_KFREE_SKB_ANY(skb) dev_kfree_skb_any(skb)


/* Set blink mode*/
#define OEM_CONFIG_VALUE (	SK_ACT_LED_BLINK | \
				SK_DUP_LED_NORMAL | \
				SK_LED_LINK100_ON)


/* Isr return value */
#define SkIsrRetVar	void
#define SkIsrRetNone	NULL
#define SkIsrRetHandled	NULL


/*******************************************************************************
 *
 * Local Function Prototypes
 *
 ******************************************************************************/

static void	FreeResources(struct SK_NET_DEVICE *dev);
static int	SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC);
static SK_BOOL	BoardAllocMem(SK_AC *pAC);
static void	BoardFreeMem(SK_AC *pAC);
static void	BoardInitMem(SK_AC *pAC);
static void	SetupRing(SK_AC*, void*, uintptr_t, RXD**, RXD**, RXD**, int*, SK_BOOL);
static SkIsrRetVar	SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs);
static SkIsrRetVar	SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs);
static int	SkGeOpen(struct SK_NET_DEVICE *dev);
static int	SkGeClose(struct SK_NET_DEVICE *dev);
static int	SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev);
static int	SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p);
static void	SkGeSetRxMode(struct SK_NET_DEVICE *dev);
static struct	net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev);
static int	SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd);
static void	GetConfiguration(SK_AC*);
static void	ProductStr(SK_AC*);
static int	XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*);
static void	FreeTxDescriptors(SK_AC*pAC, TX_PORT*);
static void	FillRxRing(SK_AC*, RX_PORT*);
static SK_BOOL	FillRxDescriptor(SK_AC*, RX_PORT*);
static void	ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL);
static void	ClearAndStartRx(SK_AC*, int);
static void	ClearTxIrq(SK_AC*, int, int);
static void	ClearRxRing(SK_AC*, RX_PORT*);
static void	ClearTxRing(SK_AC*, TX_PORT*);
static int	SkGeChangeMtu(struct SK_NET_DEVICE *dev, int new_mtu);
static void	PortReInitBmu(SK_AC*, int);
static int	SkGeIocMib(DEV_NET*, unsigned int, int);
static int	SkGeInitPCI(SK_AC *pAC);
static void	StartDrvCleanupTimer(SK_AC *pAC);
static void	StopDrvCleanupTimer(SK_AC *pAC);
static int	XmitFrameSG(SK_AC*, TX_PORT*, struct sk_buff*);

#ifdef SK_DIAG_SUPPORT
static SK_U32   ParseDeviceNbrFromSlotName(const char *SlotName);
static int      SkDrvInitAdapter(SK_AC *pAC, int devNbr);
static int      SkDrvDeInitAdapter(SK_AC *pAC, int devNbr);
#endif

/*******************************************************************************
 *
 * Extern Function Prototypes
 *
 ******************************************************************************/

#ifdef CONFIG_PROC_FS
static const char 	SK_Root_Dir_entry[] = "sk98lin";
static struct		proc_dir_entry *pSkRootDir = NULL;
extern int 	sk_proc_read(	char   *buffer,
				char	**buffer_location,
				off_t	offset,
				int	buffer_length,
				int	*eof,
				void	*data);
#endif

extern void SkDimEnableModerationIfNeeded(SK_AC *pAC);	
extern void SkDimDisplayModerationSettings(SK_AC *pAC);
extern void SkDimStartModerationTimer(SK_AC *pAC);
extern void SkDimModerate(SK_AC *pAC);

#ifdef DEBUG
static void	DumpMsg(struct sk_buff*, char*);
static void	DumpData(char*, int);
static void	DumpLong(char*, int);
#endif

/* global variables *********************************************************/
static const char *BootString = BOOT_STRING;
struct SK_NET_DEVICE *SkGeRootDev = NULL;
static int probed __initdata = 0;
static SK_BOOL DoPrintInterfaceChange = SK_TRUE;

/* local variables **********************************************************/
static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}};
static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480};


#ifdef CONFIG_PROC_FS
static struct proc_dir_entry	*pSkRootDir;
#endif



/*****************************************************************************
 *
 * 	skge_probe - find all SK-98xx adapters
 *
 * Description:
 *	This function scans the PCI bus for SK-98xx adapters. Resources for
 *	each adapter are allocated and the adapter is brought into Init 1
 *	state.
 *
 * Returns:
 *	0, if everything is ok
 *	!=0, on error
 */
static int __init skge_probe (void)
{
	int			boards_found = 0;
	int			vendor_flag = SK_FALSE;
	SK_AC			*pAC;
	DEV_NET			*pNet = NULL;
	struct pci_dev	*pdev = NULL;
	struct SK_NET_DEVICE *dev = NULL;
	SK_BOOL DeviceFound = SK_FALSE;
	SK_BOOL BootStringCount = SK_FALSE;
	int			retval;
#ifdef CONFIG_PROC_FS
	int			proc_root_initialized = 0;
	struct proc_dir_entry	*pProcFile;
#endif

	if (probed)
		return -ENODEV;
	probed++;

	if (!pci_present()) {		/* is PCI support present? */
		return -ENODEV;
	}

	while((pdev = pci_find_class(PCI_CLASS_NETWORK_ETHERNET << 8, pdev))) {

		dev = NULL;
		pNet = NULL;


		SK_PCI_ISCOMPLIANT(vendor_flag, pdev);
		if (!vendor_flag)
			continue;

		/* Configure DMA attributes. */
		if (pci_set_dma_mask(pdev, (u64) 0xffffffffffffffffULL) &&
			pci_set_dma_mask(pdev, (u64) 0xffffffff))
			continue;


		if ((dev = init_etherdev(dev, sizeof(DEV_NET))) == NULL) {
			printk(KERN_ERR "Unable to allocate etherdev "
			       "structure!\n");
			break;
		}

		pNet = dev->priv;
		pNet->pAC = kmalloc(sizeof(SK_AC), GFP_KERNEL);
		if (pNet->pAC == NULL){
			unregister_netdev(dev);
			dev->get_stats = NULL;
			kfree(dev->priv);
			printk(KERN_ERR "Unable to allocate adapter "
			       "structure!\n");
			break;
		}

		/* Print message */
		if (!BootStringCount) {
			/* set display flag to TRUE so that */
			/* we only display this string ONCE */
			BootStringCount = SK_TRUE;
			printk("%s\n", BootString);
		}

		memset(pNet->pAC, 0, sizeof(SK_AC));
		pAC = pNet->pAC;
		pAC->PciDev = pdev;
		pAC->PciDevId = pdev->device;
		pAC->dev[0] = dev;
		pAC->dev[1] = dev;
		sprintf(pAC->Name, "SysKonnect SK-98xx");
		pAC->CheckQueue = SK_FALSE;

		pNet->Mtu = 1500;
		pNet->Up = 0;
		dev->irq = pdev->irq;
		retval = SkGeInitPCI(pAC);
		if (retval) {
			printk("SKGE: PCI setup failed: %i\n", retval);
			unregister_netdev(dev);
			dev->get_stats = NULL;
			kfree(dev);
			continue;
		}

		dev->open =		&SkGeOpen;
		dev->stop =		&SkGeClose;
		dev->hard_start_xmit =	&SkGeXmit;
		dev->get_stats =	&SkGeStats;
		dev->set_multicast_list = &SkGeSetRxMode;
		dev->set_mac_address =	&SkGeSetMacAddr;
		dev->do_ioctl =		&SkGeIoctl;
		dev->change_mtu =	&SkGeChangeMtu;
		dev->flags &= 		~IFF_RUNNING;

#ifdef SK_ZEROCOPY
#ifdef USE_SK_TX_CHECKSUM

		if (pAC->ChipsetType) {
			/* Use only if yukon hardware */
			/* SK and ZEROCOPY - fly baby... */
			dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
		}
#endif
#endif

		pAC->Index = boards_found;

		if (SkGeBoardInit(dev, pAC)) {
			unregister_netdev(dev);
			kfree(dev);
			continue;
		}


		/* Print adapter specific string from vpd */
		ProductStr(pAC);
		printk("%s: %s\n", dev->name, pAC->DeviceStr);

		/* Print configuration settings */
		printk("      PrefPort:%c  RlmtMode:%s\n",
			'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber,
			(pAC->RlmtMode==0)  ? "Check Link State" :
			((pAC->RlmtMode==1) ? "Check Link State" :
			((pAC->RlmtMode==3) ? "Check Local Port" :
			((pAC->RlmtMode==7) ? "Check Segmentation" :
			((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error")))));

		SkGeYellowLED(pAC, pAC->IoBase, 1);


		memcpy((caddr_t) &dev->dev_addr,
			(caddr_t) &pAC->Addr.Net[0].CurrentMacAddress, 6);

		/* First adapter... Create proc and print message */
#ifdef CONFIG_PROC_FS
		if (!DeviceFound) {
			DeviceFound = SK_TRUE;
			SK_MEMCPY(&SK_Root_Dir_entry, BootString,
				sizeof(SK_Root_Dir_entry) - 1);

			/*Create proc (directory)*/
			if(!proc_root_initialized) {
				pSkRootDir = create_proc_entry(SK_Root_Dir_entry,
					S_IFDIR | S_IWUSR | S_IRUGO | S_IXUGO, proc_net);
				pSkRootDir->owner = THIS_MODULE;
				proc_root_initialized = 1;
			}
		}

		/* Create proc file */
		pProcFile = create_proc_entry(dev->name,
			S_IFREG | S_IXUSR | S_IWGRP | S_IROTH,
			pSkRootDir);

		pProcFile->read_proc   = sk_proc_read;
		pProcFile->write_proc  = NULL;
		pProcFile->nlink       = 1;
		pProcFile->size        = sizeof(dev->name + 1);
		pProcFile->data        = (void *)pProcFile;
		pProcFile->owner       = THIS_MODULE;
#endif

		pNet->PortNr = 0;
		pNet->NetNr  = 0;

		boards_found++;

		/* More then one port found */