⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci.c

📁 linux-2.4.29操作系统的源码
💻 C
字号:
/* * Copyright 2002 Momentum Computer * Author: Matthew Dharm <mdharm@momenco.com> * *  This program is free software; you can redistribute  it and/or modify it *  under  the terms of  the GNU General  Public License as published by the *  Free Software Foundation;  either version 2 of the  License, or (at your *  option) any later version. * *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT, *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *  You should have received a copy of the  GNU General Public License along *  with this program; if not, write  to the Free Software Foundation, Inc., *  675 Mass Ave, Cambridge, MA 02139, USA. */#include <linux/config.h>#include <linux/types.h>#include <linux/pci.h>#include <linux/kernel.h>#include <linux/slab.h>#include <linux/version.h>#include <asm/pci.h>#include <asm/io.h>#include <asm/mv64340.h>#include <linux/init.h>#ifdef CONFIG_PCI#define SELF 0/* * These functions and structures provide the BIOS scan and mapping of the PCI * devices. */#define MAX_PCI_DEVS 10void mv64340_board_pcibios_fixup_bus(struct pci_bus* c);/*  Functions to implement "pci ops"  */static int galileo_pcibios_read_config_word(struct pci_dev *dev,					    int offset, u16 * val);static int galileo_pcibios_read_config_byte(struct pci_dev *dev,					    int offset, u8 * val);static int galileo_pcibios_read_config_dword(struct pci_dev *dev,					     int offset, u32 * val);static int galileo_pcibios_write_config_byte(struct pci_dev *dev,					     int offset, u8 val);static int galileo_pcibios_write_config_word(struct pci_dev *dev,					     int offset, u16 val);static int galileo_pcibios_write_config_dword(struct pci_dev *dev,					      int offset, u32 val);static void galileo_pcibios_set_master(struct pci_dev *dev);/* *  General-purpose PCI functions. *//* * pci_range_ck - * * Check if the pci device that are trying to access does really exists * on the evaluation board.   * * Inputs : * bus - bus number (0 for PCI 0 ; 1 for PCI 1) * dev - number of device on the specific pci bus * * Outpus : * 0 - if OK , 1 - if failure */static __inline__ int pci_range_ck(unsigned char bus, unsigned char dev){	/* Accessing device 31 crashes the MV-64340. */	if (dev < 5)		return 0;	return -1;}/* * galileo_pcibios_(read/write)_config_(dword/word/byte) - * * reads/write a dword/word/byte register from the configuration space * of a device. * * Note that bus 0 and bus 1 are local, and we assume all other busses are * bridged from bus 1.  This is a safe assumption, since any other * configuration will require major modifications to the CP7000G * * Inputs : * bus - bus number * dev - device number * offset - register offset in the configuration space * val - value to be written / read * * Outputs : * PCIBIOS_SUCCESSFUL when operation was succesfull * PCIBIOS_DEVICE_NOT_FOUND when the bus or dev is errorneous * PCIBIOS_BAD_REGISTER_NUMBER when accessing non aligned */static int galileo_pcibios_read_config_dword(struct pci_dev *device,					      int offset, u32* val){	int dev, bus, func;	uint32_t address_reg, data_reg;	uint32_t address;	bus = device->bus->number;	dev = PCI_SLOT(device->devfn);	func = PCI_FUNC(device->devfn);	/* verify the range */	if (pci_range_ck(bus, dev))		return PCIBIOS_DEVICE_NOT_FOUND;	/* select the MV-64340 registers to communicate with the PCI bus */	if (bus == 0) {		address_reg = MV64340_PCI_0_CONFIG_ADDR;		data_reg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG;	} else {		address_reg = MV64340_PCI_1_CONFIG_ADDR;		data_reg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG;	}	address = (bus << 16) | (dev << 11) | (func << 8) |		(offset & 0xfc) | 0x80000000;	/* start the configuration cycle */	MV_WRITE(address_reg, address);	/* read the data */	MV_READ(data_reg, val);	return PCIBIOS_SUCCESSFUL;}static int galileo_pcibios_read_config_word(struct pci_dev *device,					     int offset, u16* val){	int dev, bus, func;	uint32_t address_reg, data_reg;	uint32_t address;	bus = device->bus->number;	dev = PCI_SLOT(device->devfn);	func = PCI_FUNC(device->devfn);	/* verify the range */	if (pci_range_ck(bus, dev))		return PCIBIOS_DEVICE_NOT_FOUND;	/* select the MV-64340 registers to communicate with the PCI bus */	if (bus == 0) {		address_reg = MV64340_PCI_0_CONFIG_ADDR;		data_reg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG;	} else {		address_reg = MV64340_PCI_1_CONFIG_ADDR;		data_reg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG;	}	address = (bus << 16) | (dev << 11) | (func << 8) |		(offset & 0xfc) | 0x80000000;	/* start the configuration cycle */	MV_WRITE(address_reg, address);	/* read the data */	MV_READ_16(data_reg + (offset & 0x3), val);	return PCIBIOS_SUCCESSFUL;}static int galileo_pcibios_read_config_byte(struct pci_dev *device,					     int offset, u8* val){	int dev, bus, func;	uint32_t address_reg, data_reg;	uint32_t address;	bus = device->bus->number;	dev = PCI_SLOT(device->devfn);	func = PCI_FUNC(device->devfn);	/* verify the range */	if (pci_range_ck(bus, dev))		return PCIBIOS_DEVICE_NOT_FOUND;	/* select the MV-64340 registers to communicate with the PCI bus */	if (bus == 0) {		address_reg = MV64340_PCI_0_CONFIG_ADDR;		data_reg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG;	} else {		address_reg = MV64340_PCI_1_CONFIG_ADDR;		data_reg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG;	}	address = (bus << 16) | (dev << 11) | (func << 8) |		(offset & 0xfc) | 0x80000000;	/* start the configuration cycle */	MV_WRITE(address_reg, address);	/* write the data */	MV_READ_8(data_reg + (offset & 0x3), val);	return PCIBIOS_SUCCESSFUL;}static int galileo_pcibios_write_config_dword(struct pci_dev *device,					      int offset, u32 val){	int dev, bus, func;	uint32_t address_reg, data_reg;	uint32_t address;	bus = device->bus->number;	dev = PCI_SLOT(device->devfn);	func = PCI_FUNC(device->devfn);	/* verify the range */	if (pci_range_ck(bus, dev))		return PCIBIOS_DEVICE_NOT_FOUND;	/* select the MV-64340 registers to communicate with the PCI bus */	if (bus == 0) {		address_reg = MV64340_PCI_0_CONFIG_ADDR;		data_reg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG;	} else {		address_reg = MV64340_PCI_1_CONFIG_ADDR;		data_reg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG;	}	address = (bus << 16) | (dev << 11) | (func << 8) |		(offset & 0xfc) | 0x80000000;	/* start the configuration cycle */	MV_WRITE(address_reg, address);	/* write the data */	MV_WRITE(data_reg, val);	return PCIBIOS_SUCCESSFUL;}static int galileo_pcibios_write_config_word(struct pci_dev *device,					     int offset, u16 val){	int dev, bus, func;	uint32_t address_reg, data_reg;	uint32_t address;	bus = device->bus->number;	dev = PCI_SLOT(device->devfn);	func = PCI_FUNC(device->devfn);	/* verify the range */	if (pci_range_ck(bus, dev))		return PCIBIOS_DEVICE_NOT_FOUND;	/* select the MV-64340 registers to communicate with the PCI bus */	if (bus == 0) {		address_reg = MV64340_PCI_0_CONFIG_ADDR;		data_reg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG;	} else {		address_reg = MV64340_PCI_1_CONFIG_ADDR;		data_reg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG;	}	address = (bus << 16) | (dev << 11) | (func << 8) |		(offset & 0xfc) | 0x80000000;	/* start the configuration cycle */	MV_WRITE(address_reg, address);	/* write the data */	MV_WRITE_16(data_reg + (offset & 0x3), val);	return PCIBIOS_SUCCESSFUL;}static int galileo_pcibios_write_config_byte(struct pci_dev *device,					     int offset, u8 val){	int dev, bus, func;	uint32_t address_reg, data_reg;	uint32_t address;	bus = device->bus->number;	dev = PCI_SLOT(device->devfn);	func = PCI_FUNC(device->devfn);	/* verify the range */	if (pci_range_ck(bus, dev))		return PCIBIOS_DEVICE_NOT_FOUND;	/* select the MV-64340 registers to communicate with the PCI bus */	if (bus == 0) {		address_reg = MV64340_PCI_0_CONFIG_ADDR;		data_reg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG;	} else {		address_reg = MV64340_PCI_1_CONFIG_ADDR;		data_reg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG;	}	address = (bus << 16) | (dev << 11) | (func << 8) |		(offset & 0xfc) | 0x80000000;	/* start the configuration cycle */	MV_WRITE(address_reg, address);	/* write the data */	MV_WRITE_8(data_reg + (offset & 0x3), val);	return PCIBIOS_SUCCESSFUL;}static void galileo_pcibios_set_master(struct pci_dev *dev){	u16 cmd;	galileo_pcibios_read_config_word(dev, PCI_COMMAND, &cmd);	cmd |= PCI_COMMAND_MASTER;	galileo_pcibios_write_config_word(dev, PCI_COMMAND, cmd);}/*  Externally-expected functions.  Do not change function names  */int pcibios_enable_resources(struct pci_dev *dev){	u16 cmd, old_cmd;	u8 tmp1;	int idx;	struct resource *r;	galileo_pcibios_read_config_word(dev, PCI_COMMAND, &cmd);	old_cmd = cmd;	for (idx = 0; idx < 6; idx++) {		r = &dev->resource[idx];		if (!r->start && r->end) {			printk(KERN_ERR			       "PCI: Device %s not available because of "			       "resource collisions\n", dev->slot_name);			return -EINVAL;		}		if (r->flags & IORESOURCE_IO)			cmd |= PCI_COMMAND_IO;		if (r->flags & IORESOURCE_MEM)			cmd |= PCI_COMMAND_MEMORY;	}	if (cmd != old_cmd) {		galileo_pcibios_write_config_word(dev, PCI_COMMAND, cmd);	}	/*	 * Let's fix up the latency timer and cache line size here.  Cache	 * line size = 32 bytes / sizeof dword (4) = 8.	 * Latency timer must be > 8.  32 is random but appears to work.	 */	galileo_pcibios_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp1);	if (tmp1 != 8) {		printk(KERN_WARNING "PCI setting cache line size to 8 from "		       "%d\n", tmp1);		galileo_pcibios_write_config_byte(dev, PCI_CACHE_LINE_SIZE,						  8);	}	galileo_pcibios_read_config_byte(dev, PCI_LATENCY_TIMER, &tmp1);	if (tmp1 < 32) {		printk(KERN_WARNING "PCI setting latency timer to 32 from %d\n",		       tmp1);		galileo_pcibios_write_config_byte(dev, PCI_LATENCY_TIMER,						  32);	}	return 0;}#if 0int pcibios_enable_device(struct pci_dev *dev, int mask){	return pcibios_enable_resources(dev);}void pcibios_update_resource(struct pci_dev *dev, struct resource *root,			     struct resource *res, int resource){	u32 new, check;	int reg;	return;	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);	if (resource < 6) {		reg = PCI_BASE_ADDRESS_0 + 4 * resource;	} else if (resource == PCI_ROM_RESOURCE) {		res->flags |= PCI_ROM_ADDRESS_ENABLE;		reg = dev->rom_base_reg;	} else {		/*		 * Somebody might have asked allocation of a non-standard		 * resource		 */		return;	}	pci_write_config_dword(dev, reg, new);	pci_read_config_dword(dev, reg, &check);	if ((new ^ check) &	    ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK :	     PCI_BASE_ADDRESS_MEM_MASK)) {		printk(KERN_ERR "PCI: Error while updating region "		       "%s/%d (%08x != %08x)\n", dev->slot_name, resource,		       new, check);	}}void pcibios_align_resource(void *data, struct resource *res,			    unsigned long size, unsigned long align){	struct pci_dev *dev = data;	if (res->flags & IORESOURCE_IO) {		unsigned long start = res->start;		/* We need to avoid collisions with `mirrored' VGA ports		   and other strange ISA hardware, so we always want the		   addresses kilobyte aligned.  */		if (size > 0x100) {			printk(KERN_ERR "PCI: I/O Region %s/%d too large"			       " (%ld bytes)\n", dev->slot_name,			        dev->resource - res, size);		}		start = (start + 1024 - 1) & ~(1024 - 1);		res->start = start;	}}#endifstruct pci_ops galileo_pci_ops = {	galileo_pcibios_read_config_byte,	galileo_pcibios_read_config_word,	galileo_pcibios_read_config_dword,	galileo_pcibios_write_config_byte,	galileo_pcibios_write_config_word,	galileo_pcibios_write_config_dword};struct pci_fixup pcibios_fixups[] = {	{0}};void __init pcibios_fixup_bus(struct pci_bus *c){	mv64340_board_pcibios_fixup_bus(c);}void __init pcibios_init(void){	/* Reset PCI I/O and PCI MEM values */	ioport_resource.start = 0xe0000000;	ioport_resource.end   = 0xe0000000 + 0x20000000 - 1;	iomem_resource.start  = 0xc0000000;	iomem_resource.end    = 0xc0000000 + 0x20000000 - 1;	pci_scan_bus(0, &galileo_pci_ops, NULL);	pci_scan_bus(1, &galileo_pci_ops, NULL);}unsigned __init int pcibios_assign_all_busses(void){	return 1;}#endif	/* CONFIG_PCI */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -