📄 pci_fixup.c
字号:
/* * BRIEF MODULE DESCRIPTION * Board specific pci fixups. * * Copyright 2001-2003 MontaVista Software Inc. * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. * * CTG 11/18/2003 Added supoprt for Au1550 SOC. The PCI block did not * change from Au1500 to the Au1550. However, the boards are now * using INTB for second PCI slot. * This is reflected in pcibios_fixup_irqs. * */#include <linux/config.h>#ifdef CONFIG_PCI#include <linux/types.h>#include <linux/pci.h>#include <linux/kernel.h>#include <linux/init.h>#include <asm/au1000.h>#ifdef CONFIG_MIPS_PB1000#include <asm/pb1000.h>#endif#undef DEBUG#ifdef DEBUG#define DBG(x...) printk(x)#else#define DBG(x...)#endifstatic void fixup_resource(int r_num, struct pci_dev *dev) ;static unsigned long virt_io_addr;void __init pcibios_fixup_resources(struct pci_dev *dev){ /* will need to fixup IO resources */}void __init pcibios_fixup(void){#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START, Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1); if (!virt_io_addr) { printk(KERN_ERR "Unable to ioremap pci space\n"); return; }#ifdef CONFIG_NONCOHERENT_IO /* * Set the NC bit in controller for pre-AC silicon */ au_writel( 1<<16 | au_readl(Au1500_PCI_CFG), Au1500_PCI_CFG); printk("Non-coherent PCI accesses enabled\n");#endif set_io_port_base(virt_io_addr);#endif#ifdef CONFIG_MIPS_PB1000 /* This is truly board specific */ unsigned long pci_mem_start = (unsigned long) PCI_MEM_START; au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0 au_writel(0, SDRAM_MBAR); // set mbar to 0 au_writel(0x2, SDRAM_CMD); // enable memory accesses au_sync_delay(1); // set extend byte to mbar of ext slot au_writel(((pci_mem_start >> 24) & 0xff) | (1 << 8 | 1 << 9 | 1 << 10 | 1 << 27), PCI_BRIDGE_CONFIG); DBG("Set bridge config to %x\n", au_readl(PCI_BRIDGE_CONFIG));#endif}void __init pcibios_fixup_irqs(void){#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) unsigned int slot; unsigned char pin; struct pci_dev *dev; extern int au1xxx_pci_irqmap(struct pci_dev *dev, unsigned char idsel, unsigned char pin); pci_for_each_dev(dev) { if (dev->bus->number != 0) return; dev->irq = 0xff; slot = PCI_SLOT(dev->devfn); pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); dev->irq = au1xxx_pci_irqmap(dev, slot, pin); //printk("Bus %d Dev %d Pin %d Irq %d\n", dev->bus->number, slot, pin, dev->irq); pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); DBG("slot %d irq %d\n", slot, dev->irq); }#endif}unsigned int pcibios_assign_all_busses(void){ return 0;}static void fixup_resource(int r_num, struct pci_dev *dev) {}#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -