[第4章 单片机功能应用]

[第4章 单片机功能应用]
    [4.1  8051定时器/计数器]
       [8051产生波形1  daima1.asm]
       [8051产生波形2  daima2.asm]
    [4.2  8051中断系统]
       [外部中断测频  daima3.asm]
    [4.3  8XC196中断系统]
       [HSI.0中断程序编程  daima4.asm]
    [4.4  8XC196单片机定时器]
       [用定时器T1溢出中断产生延时1秒  daima5.asm]
       [用T1测量脉冲宽度  daima6.asm]
       [T1和T2记录开关按下的抖动时间和次数  daima7.asm]
       [引脚P2.5产生脉冲  daima8.asm]
    [4.5  8XC196单片机A/D转换与PWM输出]
       [单通道A/D转换  daima9.asm]
       [多通道A/D转换  DAIMA10.ASM]
       [中断方式A/D转换  DAIMA11.ASM]
       [8XC196的A/D转换完成温度控制  DAIMA12.ASM]
       [PWM输出  DAIMA13.ASM]
       [PWM产生锯齿波  DAIMA14.ASM]
       [PWM产生三角波  DAIMA15.ASM]
    [4.6  8XC196单片机高速输入HSI]
       [查询FIFO溢出  DAIMA16.ASM]
       [查询HSI保持寄存器  DAIMA17.ASM]
       [测量输入方波的脉冲宽度  DAIMA18.ASM]
       [FIFO溢出中断  DAIMA19.ASM]
       [FIFO寄存器第4项数据装载中断  DAIMA20.ASM]
       [采用FIFO寄存器溢出中断  DAIMA21.ASM]
       [测量输入方波的脉冲宽度  DAIMA22.ASM]
    [4.7  8XC196单片机高速输出HSO]
       [电子钟  DAIMA23.ASM]
       [HSO.0产生周期信号  DAIMA24.ASM]
       [HSO软件定时器  DAIMA25.ASM]
       [用HSO启动A/D转换  DAIMA26.ASM]
[第5章  模数转换与数模转换]
    [5.1  模数转换系统]
       [8路模拟信号轮流查询采样  DAIMA27.ASM]
       [模拟信号中断采样  DAIMA28.ASM]
[第7章  人机接口技术]
    [7.2  显示器接口技术]
       [静态显示8051程序  DAIMA29.ASM]
       [动态扫描显示80C196程序  DAIMA30.ASM]
       [直接访问方式LCD  DAIMA31.ASM]
       [间接访问方式LCD  DAIMA32.ASM]
       [LCD应用子程序  DAIMA33.ASM]
[第8章  通信接口技术]
    [8.1  串行通信基础知识]
       [80C196串行口方式0的应用  DAIMA34.ASM]
       [8051串行口方式0的应用  DAIMA35.ASM]
       [80C196串行口方式1查询法的应用  DAIMA36.ASM]
       [80C196串行口方式1中断法的应用  DAIMA37.ASM]
    [8.3  I2C总线]
       [24CXX的应用  DAIMA38.ASM]